S690q Steel Mild Steel

S690Q Standard: EN 10025-6:2004, European standard for hot-rolled structural steel. Part 6 – Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

Gangsteel produced and export EN10025-6 high strength S690Q steel plate, We had min 1000tons stock for high strength S690Q equal grade and we also provide the cutting service with cnc, water cutting or laser cutting. Related keywords:en s690q,en 10025 s690ql,en 10025-6 s690q,en 10137 2 grade s690q,en 10025-6 s690ql equivalent astm,s690ql en 10025,s690q en 10025-6,en 10025 s690ql1,s690q en 10137-2,en 10137-2 s690ql,s690ql en 10025-6,en 10025 s690q,en 10025 steel,en 10025-s355j2men 10025-2 s355jr,en 10025 astm equivalent,en 10025-6 s690ql,en 10025 s690ql,en 10025 steel equivalent,en 10025 s355k2g4,en 10025-6 s690ql equivalent astm,en 10025-6 s690q,bs en 10025-6-s690ql,acero en 10025-6 s690ql,en 10025 s690ql1,en 10025 p 6 2004 s690ql,en 10025-1 equivalent,ss-en 10025-6 s690ql and en 10025-6 grade s690ql.

Prime En10137

It is feasible to provide metal plates that have greater than twice the power of these produced from mild steel by way of a heat therapy process generally known as quenching and tempering. Steel is heated to a point above its higher crucial temperature and is then very quickly cooled in water.

S690q Steel Plate Wholesale, Steel Suppliers

Steel with minimal yield energy of 690 MPa has proved extremely popular with steel customers because of its availability, value, and ease of fabrication. It is ready to enhance the efficiency, sturdiness, and safety of vehicles, lifting tools, and steel structures. Due to the steels excessive power, constructions may be designed lighter, payloads elevated, and power used extra efficiently.

The temperature cycles had been measured after which the obtained values for the crucial cooling time t8/5 have been entered into the CCT diagrams to estimate the hardness and microstructure of the welded joint’s zones. Experiments were carried out on the multi-layered exhausting-confronted samples manufactured from the steel for manufacturing of the forging dies. The examine evaluates numerically and experimentally the effect of welding warmth input parameters on the microstructure and hardness of the heat-affected zone of quenched and tempered and thermo-mechanically controlled course of 690-MPa excessive-power steel. Numerical analyses and experimental comparisons have been applied using three heat input values (10, 14, and 17 kJ/cm) so as to predict the thermal fields throughout welding. Experimental analysis was carried out of the microstructure and microhardness conduct in several HAZ areas.

The tensile energy is improved significantly for the low warmth enter joint. While joints are produced with greater warmth input, the grain structure is instability in the nugget zone during the resolution warmth remedy. Especially, the strengthening perform of the solution warmth therapy and getting older therapy is fail while the millimeter scale grain have been formed in the nugget zone.

S690Q is excessive yield power structural steels grade in the quenched and tempered. The symbol S is structural steel, 690 for the minimum yield strength in thickness underneath 50mm. S690q might be via the -20 temperature influence and the energy is 30J.EN Grade S690QL quenched and tempered (+QT s690q propertySee the chemical composition and bodily properties of EN Grade S690QL quenched and tempered (+QT), discover alternative supplies EN10025-6 S690Q steel plate supplier, and connect with suppliers.S690QL1 Structural Steel Plate, S690QL1 Plate, DILLIMAX s690q propertyS690QL1 metal plate, higher generally known as SUPRALSIM 690 is an ideal budget metal plate, offering minimum yield strength of 690 MPa. Our S690QL1 structural metal plates are nice grained, for optimum performance in precarious working conditions.

S890ql Steel

S690Q is stunning yield quality real steels review in the quenched and tempered. The picture S is relating steel, 690 for the base yield quality in thickness under 50mm.The Symbol Q mean the vehicle condition in secured and tempered. S690q could be through the 20-temperature impact and the significance is 30J.Definition of BS7608 fatigue classes for structural steels Concerning the oxy fuel cutting, the Loga mean test values of S355M and S690Q are lower than the corresponding Loga limit values obtained for the design class B, so class B cannot be applied strictly to S355M and S690Q with oxy fuel cut edges. Consequently, the analysis followed here provides the same fatigue class for oxy fuel cut straight Down Loadstone Supplier.Gangsteel supply high strength steel plates in S690Q,S690QL,S690QL1,S890Q,S960Q,S890QL
Equivalent Grades of EN 10025–6:2004 S690QL Steel Plate

Grade	Standards	Country
S690QL EN10137-2 EN10025-6:2004	EN	EUROPE
A709-100	ASTM	USA
TStE690V DILLIMAX 690 NAXTRA 70	DIN, WNr	GERMANY
E690T E690TFP S690T	AFNOR/ NF A36- 204	FRANCE
FeE690VKT	EN	EUROPEAN (OLD)
2625 WELDOX 700	SS	SWEDON
E690	ISO 4952	INTER
JFE HITEN 780LE	JIS	JAPAN
ALFORM 700		AUSTRIA

mechanical properties of grade EN10025-6 S690Q

	Minimum yield strength – ReH MPa			Tensile strength Rm MPa			Minimum elongation – A Lo = 5,65* √So (%)
Steel grade	Nominal thickness mm			Nominal thickness mm
	>3 ≤50	>50 ≤100	>100 ≤150	>3 ≤50	>50 ≤100	>100 ≤150
S690Q	690	650	630	770-940	760-930	710-900	14

EN10025-6 Notch impact test.
Notch impact test – longitudinal. Minimum values of impact energy for impact tests on longitudinal V-notch test pieces for quenched and tempered steel

EN10025 S690Q Structural Steel. EN10025:6:2004 Hot Rolled S690Q, Steel Number 1.8928. 690 N/MM 2 high yield, high strength structural steel plate notch impact tested in longitudinal direction to the rolling direction at 40degree C, thus being excellent in forming and Pharmacia ita welding properties that achieve another higher level of beauty and durability in steel engineering structure. Steel Plate 2.25Cr1Mo0.25V(H) S690QSteel Plate 2.25Cr1Mo0.25V(H) Category Pressure Vessel and Boiler Steel Plate ModelWYJ046 2006 Standard Specification is for boilers and pressure vessels designed in H2 service. The dimension, shape, weight and permissible deviation shall comply with SA20/SA20M.Optimal welding technology of high strength steel S690Q For the S690Q L steel, the recommended . preheating temperature should be 150

Temperature °C		-20	0
Min. absorbed energy J		40	50

Notch impact test – transverse. Minimum values of impact energy for impact tests on transverse V-notch test pieces for quenched and tempered steel, when the impact test on transverse test pieces is agreed at the time of the order.

Temperature °C	-40	-20	0
Min. absorbed energy J	27	30	35

The tables below show the chemical composition of grade EN10025-6 S690Q

	Ladle analysis. Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum values given in order to obtain the specified properties. Nb, Ti, V, Zr shall be at least 0,015 % of a grain-refining element present. Aluminum is also one of these elements. The minimum content of 0,015 % applies to soluble aluminum, this value is regarded as attained if the total aluminum content is at least 0,018 %; in case of dispute the soluble aluminum content shall be determined.
Steel grade	C max. %	Mn max. %	Si max. %	P max. %	S max. %	B max. %	Nb max. %	V max. %	Ti max. %	Cr max. %	Mo max. %	Ni max. %	Cu max. %	Mo max. %	N max. %	Zr max. %	CEV max. %
																	≤50	>50 ≤100	>100 ≤150
S690QL	0,20	1,70	0,80	0,020	0,010	0,005	0,06	0,12	0,05	1,50	0,70	2,0	0,50	0,70	0,015	0,15	0,65	0,77	0,83

 

EN10025-6 S690Q Steel Grade Equivalent Table

European old EU 137 (1983)	France AFNOR	Sweden SS	Germany DIN,WNr
FeE 690 V KT	E690T	2625	TStE690V

Description by Manufacturer
Sell: S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1, Steel plate, EN 10025-4
EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

1. Steel Grade : S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.

2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm

3. Adopt Standard: EN 10025-6.

4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate

6. Payment Item: 30% TT, or LC and TT

7. Trade Terms: FOB, CFR, CIF

8. Delivery Time: 30-40days

DIN EN S690Q /S690QL/S690QL1 Condition of Delivery Water quenched and tempered. Typical Applications Heavy road vehicleschassis, dumper bodies. Cranes constructionbooms of mobile cranes. Structural steelworksbridges, bridge components, components for offshore structures. Pressure vesselsfixed and transportable storage tanks, vessels.S690Q Steel Plates Manufacturer in China, S690Q Steel The S690Q grade is austenitic in nature suitable for heavy engineering works. Plus, it has good formability and weldability property. Plates are both magnetic and non magnetic in nature. It serves good resistivity towards crevice and pitting cracking subjected to impact loads.S690QL Plate, S690QL Steel Plates, S690QL Quenched and What is S690QL Steel Plate Legally certified industry Rexton steel & alloys are busy in supplying the excellent and desirable quality of S690QL PLATES globally. They are fully focusing on offering clients with the top notch quality of plates and other essential services.

S690Q steel is used in structures subject to extreme loadsmining and heavy construction equipment, crane equipment, offshore drilling platforms, supporting structures for wind turbines, bridges and trestles.Plates of S690Q steel grade MetinvestS690Q structural high strength steel with minimum yield strength of 690 MPa supplied in quenched and tempered condition (Q). Plates of S690 steel grade comply with EN 10025 6 standard.S690Q / 1.8931 SteelNumber Chemical composition S690Q Number1.8931 ClassificationAlloy special steel with specified minimum values of impact energy at temperatures not lower than 20 °C StandardEN 10025 62004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

Menu

Consequently the MTC won’t mirror the actual properties of the steel. optimum technology, acceptable warmth enter and the cooling fee in the temperature range from 600° C to 200° C. Present analysis via the automation process, rigorously choice consumable and controlling cooling rate within the temperature range from 600° C to 200° C gave the welded joint with out cracks and pores. The width of the HAZ was inside the range of accepted in the usual MIL-STAN-1185 (max. 15.9 mm from the centerline of the joint).

That impedes welding and makes as an imperative to check totally different aspects of this steel’s properties as well as those of eventual filler metal. Selection and defining of the optimum welding expertise of this excessive energy metal is done for the aim of preserving the favorable mechanical properties as soon as the welded joint is realized; properties of the welded steel and the melting zone, as well as in the heat affected zone, which is probably the most critical zone of the welded joint.

Gangsteel Company sells S960QL steel plate sickly based on EN Standard for our prospects. our mill have a few years experience in S960QL metal manufacturing technique. Unitedsteel Mill Supply High power metal plate, and have various inventory dimension, If you require excessive power metal plate. Unitedsteel Mill Supply High strength steel plate, and have numerous stock dimension, when you require excessive strength steel plate, please contact us by way of Email to contact us.

• Due to the steels excessive energy, structures could be designed lighter, payloads elevated, and power used more efficiently.
• The topic of the research, results of which are introduced on this paper, was experimental investigation of welded samples of the excessive strength steel S690QL.
• It is able to improve the performance, durability, and safety of automobiles, lifting equipment, and metal structures.
• In order to ascertain the optimum welding procedure, one has to verify and/or verify completely different parameters of the chosen technology.
• That contains verifying the chemical composition of the delivered base steel, determining its weldability, deciding on the type of eventual heat remedy and then checking that the executed welded joints possess the required mechanical and metallurgical properties.

Hot forming of S690QL and different high yield steels just isn’t beneficial as the recent forming will remove the advantages of the mills tempering process. This signifies that the new formed plate will then need to be tempered again. Given that much of the power of the plate comes from the optimised tempering process any advert hoc tempering is likely to lead to quote different results than these of the preliminary plate.

Our S690Q is a structural steel grade and is produced to give high yield strength during usage. The material can be heat treated using quench and temper techniques. These EN 10025 6 Plates have good forming and welding properties. S690Q plates have higher payload capacity and are energy efficient, hence can be used in leaner structures.S690Q / 1.8928 SteelNumber Chemical composition Nominal thickness = 50(mm) CEV max = 0.65 Nominal thickness from 50 to 100 (mm) CEV max = 0.77 Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum values given in order to obtain the specified propertiesEN 10025 S690QL Brown McFarlaneHigh strength quenched and tempered steel plate can be easily welded and fabricated. We often find that steel plate to EN 10025 S690QL is called different things by different engineers. Plate to this specification and grade is variously described asHigh Strength Quenched and Tempered Steel Plate. If you have requirement for high strength steel plate,please contact us by email.