En10025

Standard: EN 10025-6:2004, European standard for hot-rolled structural . Part 6 – Technical delivery conditions for flat products of high yield structural steels in the quenched and tempered condition

Gangsteel produced and export EN10025-6 high strength S690Q steel plate, We had min 1000tons stock for high strength S690Q equal grade and we also provide the cutting service with cnc, water cutting or laser cutting. Related keywords:en s690q,en 10025 s690ql,en 10025-6 s690q,en 10137 2 grade s690q,en 10025-6 s690ql equivalent astm,s690ql en 10025,s690q en 10025-6,en 10025 s690ql1,s690q en 10137-2,en 10137-2 s690ql,s690ql en 10025-6,en 10025 s690q,en 10025 steel,en 10025-s355j2men 10025-2 s355jr,en 10025 astm equivalent,en 10025-6 s690ql,en 10025 s690ql,en 10025 steel equivalent,en 10025 s355k2g4,en 10025-6 s690ql equivalent astm,en 10025-6 s690q,bs en 10025-6-s690ql,acero en 10025-6 s690ql,en 10025 s690ql1,en 10025 p 6 2004 s690ql,en 10025-1 equivalent,ss-en 10025-6 s690ql and en 10025-6 grade s690ql.

Beside experimental testing, strengthening curves have been calculated and numerical analysis using finite element method was performed. Both the experimental and numerical outcomes have proven that decrease of mecahanical properties occurs at roughly 450°C. Quenched and tempered plate, a steel that is stronger and harder than ordinary carbon metal. The product is used for the manufacture and repair of equipment and buildings where greater abrasion resistance or greater yield strength are required. input on the mechanical properties of the welded joint the test steels had been welded with one, two or more runs, out of which samples have been made for the production of specimens so as to measure the hardness and impression energy in HAZ .

  • ASTM A514 alloy metal plate is thought for its high yield strength, weldability, and toughness, even at low temperatures.
  • Resume In this paper are thought of the most important properties of a special class of high strength steels S690QL, which could be classified into the group of special low alloyed steels.
  • It is a low carbon quenched and tempered alloy metal that is a low-price, excessive performing materials for structural use and excessive wear machine purposes.
  • The steel could be very similar in its properties to the European metal specification EN S690QL.

S960QL is a structural steel grade with a fair higher yield strength than S890QLWeldox 960 meets the requirements of EN for the corresponding grades. S890QL is a basic structural metal that relying on thickness ensures a minimal yield power of up to 890 MPa. Typical functions are demanding load-bearing buildings.This type of steel which is nicely over thrice the strength of a primary S275 structural steel remains to be relatively simple to weld and fabricate.

Domex 700 MC IS Hot rolled, additional high energy, cold forming steel from SSAB Sweden. Domex chilly forming steels are thermo-mechanically rolled in fashionable EN10025-6 S690Q steel plate supplier vegetation where the heating, rolling and cooling processes are rigorously controlled.

EN 10025-6 S690Q strength steel niobium

It is really helpful that the largest attainable bending radius ought to be used, and customarily the inside radius shouldn’t be less that 3 occasions the plate thickness. RQT steels may be reduce satisfactorily utilizing conventional oxy-gasoline gasoline practices, in lots of cases with out the necessity for preheat, so long as cutting procedures bear in mind plate thicknesses and carbon equal values. Care should be taken when slicing underneath water as the quenching effect could result in a excessive hardness edge forming. With all thermal cutting processes care must be taken that minimize edges are free from sharp notches.

DIN EN S690Q /S690QL/S690QL1 Condition of Delivery Water quenched and tempered. Typical Applications Heavy road vehicleschassis, dumper bodies. Cranes constructionbooms of mobile cranes. Structural steelworksbridges, bridge components, components for offshore structures. Pressure vesselsfixed and transportable storage tanks, vessels.S690Q Steel Plates Manufacturer in China, S690Q Steel The S690Q grade is austenitic in nature suitable for heavy engineering works. Plus, it has good formability and weldability property. Plates are both magnetic and non magnetic in nature. It serves good resistivity towards crevice and pitting cracking subjected to impact loads.S690QL Plate, S690QL Steel Plates, S690QL Quenched and What is S690QL Steel Plate Legally certified industry Rexton steel & alloys are busy in supplying the excellent and desirable quality of S690QL PLATES globally. They are fully focusing on offering clients with the top notch quality of plates and other essential services.

S690Q steel is used in structures subject to extreme loadsmining and heavy construction equipment, crane equipment, offshore drilling platforms, supporting structures for wind turbines, bridges and trestles.Plates of S690Q steel grade MetinvestS690Q structural high strength steel with minimum yield strength of 690 MPa supplied in quenched and tempered condition (Q). Plates of S690 steel grade comply with EN 10025 6 standard.S690Q / 1.8931 SteelNumber Chemical composition S690Q Number1.8931 ClassificationAlloy special steel with specified minimum values of impact energy at temperatures not lower than 20 °C StandardEN 10025 62004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

Supporting Documents

Weldability represents a very advanced property of a fabric that shows its ability to type a welded joint of sure characteristics, by software of the adequate welding process. The procedure of weldability estimate, primarily based on the transformation diagrams of continuous cooling (CCT-diagrams) and the measured temperature cycles, is presented on this paper. The objective was to find out the weldability to have the ability to define the optimal hard-facing technology of the thermo steady steels. The temperature cycles have been measured and then the obtained values for the crucial cooling time t8/5 were entered into the CCT diagrams to estimate the hardness and microstructure of the welded joint’s zones. Experiments were carried out on the multi-layered onerous-confronted samples made from the metal for manufacturing of the forging dies.

a hundred ksi/690 MPa metal plate is a excessive power, metal plate produced utilizing a Thermo Mechanically Controlled Process . This process allows the plate to have a superior floor quality, wonderful weldability, higher forming and higher charpy values than Q & T plate.100KSI steel plate was developed for purposes that require a excessive strength-to-weight ratio. It has many of the similar properties as A514 carbon metal plate, including excessive power, machinability and weldability.

Effect Of Welding Heat Input And Pwht Cooling Rate On Mechanical Properties Of Welded Region At Saw ..

The examine evaluates numerically and experimentally the effect of welding heat enter parameters on the microstructure and hardness of the warmth-affected zone of quenched and tempered and thermo-mechanically managed course of 690-MPa high-strength metal. Numerical analyses and experimental comparisons had been applied utilizing three warmth input values (10, 14, and 17 kJ/cm) in order to predict the thermal fields throughout welding. Experimental analysis was carried out of the microstructure and microhardness behavior in numerous HAZ areas.

S690q Steel Plate Stockists, S690q Plate Stockist, 690 Chemical Composition

无标题文档

S690Q is stunning yield quality real steels review in the quenched and tempered. The picture S is relating steel, 690 for the base yield quality in thickness under 50mm.The Symbol Q mean the vehicle condition in secured and tempered. S690q could be through the 20-temperature impact and the significance is 30J.Definition of BS7608 fatigue classes for structural steels Concerning the oxy fuel cutting, the Loga mean test values of S355M and S690Q are lower than the corresponding Loga limit values obtained for the design class B, so class B cannot be applied strictly to S355M and S690Q with oxy fuel cut edges. Consequently, the analysis followed here provides the same fatigue class for oxy fuel cut straight Down Loadstone Supplier.Gangsteel supply high strength steel plates in S690Q,S690QL,S690QL1,S890Q,S960Q,S890QL
Equivalent Grades of EN 10025–6:2004 S690QL Steel Plate

Grade

Standards

Country

S690QL EN10137-2 EN10025-6:2004

EN

EUROPE

A709-100

ASTM

USA

TStE690V DILLIMAX 690 NAXTRA 70

DIN, WNr

GERMANY

E690T E690TFP S690T

AFNOR/ NF A36- 204

FRANCE

FeE690VKT

EN

EUROPEAN (OLD)

2625 WELDOX 700

SS

SWEDON

E690

ISO 4952

INTER

JFE HITEN 780LE

JIS

JAPAN

ALFORM 700

AUSTRIA

mechanical properties of grade EN10025-6 S690Q

 

Minimum yield strength – ReH
MPa

Tensile strength Rm
MPa

Minimum elongation – A
Lo = 5,65* √So (%)

Steel grade

Nominal thickness
mm

Nominal thickness
mm

 

>3
≤50

>50
≤100

>100
≤150

>3
≤50

>50
≤100

>100
≤150

S690Q

690

650

630

770-940

760-930

710-900

14

EN10025-6 Notch impact test.
Notch impact test – longitudinal. Minimum values of impact energy for impact tests on longitudinal V-notch test pieces for quenched and tempered steel

EN10025 S690Q Structural Steel. EN10025:6:2004 Hot Rolled S690Q, Steel Number 1.8928. 690 N/MM 2 high yield, high strength structural steel plate notch impact tested in longitudinal direction to the rolling direction at 40degree C, thus being excellent in forming and Pharmacia ita welding properties that achieve another higher level of beauty and durability in steel engineering structure. Steel Plate 2.25Cr1Mo0.25V(H) S690QSteel Plate 2.25Cr1Mo0.25V(H) Category Pressure Vessel and Boiler Steel Plate ModelWYJ046 2006 Standard Specification is for boilers and pressure vessels designed in H2 service. The dimension, shape, weight and permissible deviation shall comply with SA20/SA20M.Optimal welding technology of high strength steel S690Q For the S690Q L steel, the recommended . preheating temperature should be 150

Temperature
°C

-20

0

Min. absorbed energy
J

40

50

Notch impact test – transverse. Minimum values of impact energy for impact tests on transverse V-notch test pieces for quenched and tempered steel, when the impact test on transverse test pieces is agreed at the time of the order.

Temperature
°C

-40

-20

0

Min. absorbed energy
J

27

30

35

The tables below show the chemical composition of grade EN10025-6 S690Q

 

Ladle analysis.
Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum values given in order to obtain the specified properties.
Nb, Ti, V, Zr shall be at least 0,015 % of a grain-refining element present. Aluminum is also one of these elements. The minimum content of 0,015 % applies to soluble aluminum, this value is regarded as attained if the total aluminum content is at least 0,018 %; in case of dispute the soluble aluminum content shall be determined.

Steel grade

C
max.
%

Mn
max.
%

Si
max.
%

P
max.
%

S
max.
%

B
max.
%

Nb
max.
%

V
max.
%

Ti
max.
%

Cr
max.
%

Mo
max.
%

Ni
max.
%

Cu
max.
%

Mo
max.
%

N
max.
%

Zr
max.
%

CEV
max. %

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≤50

>50
≤100

>100
≤150

S690QL

0,20

1,70

0,80

0,020

0,010

0,005

0,06

0,12

0,05

1,50

0,70

2,0

0,50

0,70

0,015

0,15

0,65

0,77

0,83

 

EN10025-6 S690Q Steel Grade Equivalent Table

European old
EU 137 (1983)

France
AFNOR

Sweden
SS

Germany
DIN,WNr

FeE 690 V KT

E690T

2625

TStE690V

Description by Manufacturer
Sell: S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1, Steel plate, EN 10025-4
EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

1. Steel Grade : S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.

2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm

3. Adopt Standard: EN 10025-6.

4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate

6. Payment Item: 30% TT, or LC and TT

7. Trade Terms: FOB, CFR, CIF

8. Delivery Time: 30-40days

This specification covers precipitation-strengthened low carbon nickel copper-chromium-molybdenum-columbium alloy structural steel plates. Precipitation strengthening and precipitation warmth therapy shall be performed on the fabric to boost and alter the required structural and mechanical properties.

S690QL1 has the steel number one.8988 according to EN and is out there on an ex-stock foundation in thicknesses from 6 mm to 250 mm. S960QL is a High Yield Strength Structural Steel in the quenched and tempered condition which gives the material glorious strength.

Our S690Q is a structural steel grade and is produced to give high yield strength during usage. The material can be heat treated using quench and temper techniques. These EN 10025 6 Plates have good forming and welding properties. S690Q plates have higher payload capacity and are energy efficient, hence can be used in leaner structures.S690Q / 1.8928 SteelNumber Chemical composition Nominal thickness = 50(mm) CEV max = 0.65 Nominal thickness from 50 to 100 (mm) CEV max = 0.77 Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum values given in order to obtain the specified propertiesEN 10025 S690QL Brown McFarlaneHigh strength quenched and tempered steel plate can be easily welded and fabricated. We often find that steel plate to EN 10025 S690QL is called different things by different engineers. Plate to this specification and grade is variously described asHigh Strength Quenched and Tempered Steel Plate. If you have requirement for high strength steel plate,please contact us by email.

EN 10025-6 S690Q strength steel
Tagged on: