Advantages

S690Q Standard: EN 10025-6:2004, European standard for hot-rolled structural . Part 6 – Technical delivery conditions for flat products of high yield structural steels in the quenched and tempered condition

Gangsteel produced and export EN10025-6 high strength S690Q steel plate, We had min 1000tons stock for high strength S690Q equal grade and we also provide the cutting service with cnc, water cutting or laser cutting. Related keywords:en s690q,en 10025 s690ql,en 10025-6 s690q,en 10137 2 grade s690q,en 10025-6 s690ql equivalent astm,s690ql en 10025,s690q en 10025-6,en 10025 s690ql1,s690q en 10137-2,en 10137-2 s690ql,s690ql en 10025-6,en 10025 s690q,en 10025 steel,en 10025-s355j2men 10025-2 s355jr,en 10025 astm equivalent,en 10025-6 s690ql,en 10025 s690ql,en 10025 steel equivalent,en 10025 s355k2g4,en 10025-6 s690ql equivalent astm,en 10025-6 s690q,bs en 10025-6-s690ql,acero en 10025-6 s690ql,en 10025 s690ql1,en 10025 p 6 2004 s690ql,en 10025-1 equivalent,ss-en 10025-6 s690ql and en 10025-6 grade s690ql.

Parent materials as a delivered condition had a bainitic-martensitic microstructure at hardness about 290 HV0.5. After welding, the microstructure of warmth affected zone is composed primarily of martensite of hardness 420 HV0.5. It should be famous, nevertheless, that the microstructure of metal in the warmth affected zone varies with the distance from the fusion line.

En 10025

A quenched & tempered, high-strength, weldable steel plate utilized in structural purposes. Because of this materials excessive yield energy it’s ideal for projects requiring a light weight metal with out sacrificing durability or toughness.

无标题文档

S690Q is stunning yield quality real steels review in the quenched and tempered. The picture S is relating steel, 690 for the base yield quality in thickness under 50mm.The Symbol Q mean the vehicle condition in secured and tempered. S690q could be through the 20-temperature impact and the significance is 30J.Definition of BS7608 fatigue classes for structural steels Concerning the oxy fuel cutting, the Loga mean test values of S355M and S690Q are lower than the corresponding Loga limit values obtained for the design class B, so class B cannot be applied strictly to S355M and S690Q with oxy fuel cut edges. Consequently, the analysis followed here provides the same fatigue class for oxy fuel cut straight Down Loadstone Supplier.Gangsteel supply high strength steel plates in S690Q,S690QL,S690QL1,S890Q,S960Q,S890QL
Equivalent Grades of EN 10025–6:2004 S690QL Steel Plate

Grade

Standards

Country

S690QL EN10137-2 EN10025-6:2004

EN

EUROPE

A709-100

ASTM

USA

TStE690V DILLIMAX 690 NAXTRA 70

DIN, WNr

GERMANY

E690T E690TFP S690T

AFNOR/ NF A36- 204

FRANCE

FeE690VKT

EN

EUROPEAN (OLD)

2625 WELDOX 700

SS

SWEDON

E690

ISO 4952

INTER

JFE HITEN 780LE

JIS

JAPAN

ALFORM 700

AUSTRIA

mechanical properties of grade EN10025-6 S690Q

 

Minimum yield strength – ReH
MPa

Tensile strength Rm
MPa

Minimum elongation – A
Lo = 5,65* √So (%)

Steel grade

Nominal thickness
mm

Nominal thickness
mm

 

>3
≤50

>50
≤100

>100
≤150

>3
≤50

>50
≤100

>100
≤150

S690Q

690

650

630

770-940

760-930

710-900

14

EN10025-6 Notch impact test.
Notch impact test – longitudinal. Minimum values of impact energy for impact tests on longitudinal V-notch test pieces for quenched and tempered steel

EN10025 S690Q Structural Steel. EN10025:6:2004 Hot Rolled S690Q, Steel Number 1.8928. 690 N/MM 2 high yield, high strength structural steel plate notch impact tested in longitudinal direction to the rolling direction at 40degree C, thus being excellent in forming and Pharmacia ita welding properties that achieve another higher level of beauty and durability in steel engineering structure. Steel Plate 2.25Cr1Mo0.25V(H) S690QSteel Plate 2.25Cr1Mo0.25V(H) Category Pressure Vessel and Boiler Steel Plate ModelWYJ046 2006 Standard Specification is for boilers and pressure vessels designed in H2 service. The dimension, shape, weight and permissible deviation shall comply with SA20/SA20M.Optimal welding technology of high strength steel S690Q For the S690Q L steel, the recommended . preheating temperature should be 150

Temperature
°C

-20

0

Min. absorbed energy
J

40

50

Notch impact test – transverse. Minimum values of impact energy for impact tests on transverse V-notch test pieces for quenched and tempered steel, when the impact test on transverse test pieces is agreed at the time of the order.

Temperature
°C

-40

-20

0

Min. absorbed energy
J

27

30

35

The tables below show the chemical composition of grade EN10025-6 S690Q

 

Ladle analysis.
Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum values given in order to obtain the specified properties.
Nb, Ti, V, Zr shall be at least 0,015 % of a grain-refining element present. Aluminum is also one of these elements. The minimum content of 0,015 % applies to soluble aluminum, this value is regarded as attained if the total aluminum content is at least 0,018 %; in case of dispute the soluble aluminum content shall be determined.

Steel grade

C
max.
%

Mn
max.
%

Si
max.
%

P
max.
%

S
max.
%

B
max.
%

Nb
max.
%

V
max.
%

Ti
max.
%

Cr
max.
%

Mo
max.
%

Ni
max.
%

Cu
max.
%

Mo
max.
%

N
max.
%

Zr
max.
%

CEV
max. %

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≤50

>50
≤100

>100
≤150

S690QL

0,20

1,70

0,80

0,020

0,010

0,005

0,06

0,12

0,05

1,50

0,70

2,0

0,50

0,70

0,015

0,15

0,65

0,77

0,83

 

EN10025-6 S690Q Steel Grade Equivalent Table

European old
EU 137 (1983)

France
AFNOR

Sweden
SS

Germany
DIN,WNr

FeE 690 V KT

E690T

2625

TStE690V

Description by Manufacturer
Sell: S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1, Steel plate, EN 10025-4
EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

1. Steel Grade : S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.

2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm

3. Adopt Standard: EN 10025-6.

4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate

6. Payment Item: 30% TT, or LC and TT

7. Trade Terms: FOB, CFR, CIF

8. Delivery Time: 30-40days

Doc Ita Steel Licensing System

EN C60 metal plate excessive carbon steel C60 metal plate, EN C60 steel plate, underneath EN normal, we will regard C60 steel plate as high carbon metal. C60 metal plate is one primarily of high carbon steel,EN C60 steel plate is one of the higher carbon content material (0.60%) steels.It is more difficult to manufacture than the decrease carbon s460ql steel plate factoryEN S460QL quenched and tempered steel plate Gangsteel sell S460QL S460QL and S460QL1EN steel plates instantly from our mill.

The proposed analysis are oriented on gaining new data on this field of science and engineering. The scientific objective of the project is to characterize totally microstructural adjustments occurring during EN10025-6 S690Q steel plate supplier interaction of high-power beams with selected metal grades and correlation these adjustments with microhardness particularly weld zones.

The results indicated that a single-sided welding approach might be used to hitch S690QL steels up to a thickness of 12 mm when the laser power is the same as 12 kW (scan velocity 1 m/min). Double-facet welding approach permits higher weld penetration and better control of heat distribution. Observation of the samples confirmed that the fusion zone exhibited bainitic and martensitic microstructures with elevated amounts of martensites in contrast with the base supplies. Also, the grains in the fusion zone elevated in coarseness as the heat enter was increased.

DIN EN S690Q /S690QL/S690QL1 Condition of Delivery Water quenched and tempered. Typical Applications Heavy road vehicleschassis, dumper bodies. Cranes constructionbooms of mobile cranes. Structural steelworksbridges, bridge components, components for offshore structures. Pressure vesselsfixed and transportable storage tanks, vessels.S690Q Steel Plates Manufacturer in China, S690Q Steel The S690Q grade is austenitic in nature suitable for heavy engineering works. Plus, it has good formability and weldability property. Plates are both magnetic and non magnetic in nature. It serves good resistivity towards crevice and pitting cracking subjected to impact loads.S690QL Plate, S690QL Steel Plates, S690QL Quenched and What is S690QL Steel Plate Legally certified industry Rexton steel & alloys are busy in supplying the excellent and desirable quality of S690QL PLATES globally. They are fully focusing on offering clients with the top notch quality of plates and other essential services.

S690Q steel is used in structures subject to extreme loadsmining and heavy construction equipment, crane equipment, offshore drilling platforms, supporting structures for wind turbines, bridges and trestles.Plates of S690Q steel grade MetinvestS690Q structural high strength steel with minimum yield strength of 690 MPa supplied in quenched and tempered condition (Q). Plates of S690 steel grade comply with EN 10025 6 standard.S690Q / 1.8931 SteelNumber Chemical composition S690Q Number1.8931 ClassificationAlloy special steel with specified minimum values of impact energy at temperatures not lower than 20 °C StandardEN 10025 62004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

En10025s355j2g3

In explicit, new technology of structural steels with high yield strengths as well as corrosion resistant ferritic-austenitic steels . Changes in iron alloys going down throughout thermal cycles occurring during traditional welding are well known from decades. However, the standard welding produces a relatively broad weld that contributes to the deterioration of mechanical properties.

EN 10025-6 S690Q strength lightweight steel

Astm A514 Alloy Steel :: Makeitfrom, Astm A514 European Equivalent

Gangsteel are particular subject of exporting steel plate on base of enormous relation with our mill in China. DILLIMAX 965 is a high strength quenched and tempered, fantastic grained structural metal with a minimum yield strength of 960 MPa in its supply condition , which mechanical properties are achieved by water quenching followed by tempering. Ltd is specialized in low alloy high power structural steel, primarily coping with specification commonplace plates in EN , EN , EN , EN , ASTM A633, ASTM A573, ASTM A572, DIN 17100, JIS G3106, ASTM A709, ASTM A283, ASTM A529, ASTM A656, EN 10225, ISO 630, NFA , and so forth, the thickness as much as 300mm. In the paper the outcomes of metallographic examination and mechanical properties of electron beam welded joint of quenched and tempered metal grade S690QL are offered. Metallographic examination revealed that the concentrated electron beam significantly have an effect on the changes of microstructure in the metal.

Many extra dislocations and plastic deformations had been discovered in the fusion zone than the heat-affected zone in the joint, which hardened the joints and lowered the impact toughness. The microstructures characterized by FTEM–vitality-dispersive X-ray spectrometer also exhibited laths of M, in addition to stacking faults and dislocations featuring high-density, interfacial construction ledges that happen between the high-angle grain boundaries and the M and bainite. Owing to our expertise and experience in S690QL1 structural metal plates, we’re suppliers of high quality, dent – free structural steel plates to a variety of industries.

  • In particular, new technology of structural steels with high yield strengths in addition to corrosion resistant ferritic-austenitic steels .
  • It is associated with both high heating and cooling charges.
  • Changes in iron alloys taking place throughout thermal cycles occurring during conventional welding are well-known from a long time.
  • Though the impairment of the mechanical performance of welds can’t be avoided and utterly eliminated, it may be reduced by producing a very slender heat affected zone that adjoin to the weld.
  • The analysis will be carried out on modern steel grades by which the phenomena occurring during interactions with excessive-energy beams usually are not absolutely acknowledged but.

Applications embrace truck & trailer frames, heavy building tools, and crane booms.Steel Grade Equivalent Table (EN, SAE/AISI, UNS, DIN, BS astm a514 european equivalentSteel Grade Equivalent Table (EN, SAE/AISI, UNS, DIN, BS, UNI, JIS) The table below compares widespread grades of materials from varied worldwide specifications. Note that materials in contrast are the nearest out there grade and should have slight variations in precise chemistry. Such an interaction plays a significant function in welding of these alloys. It is associated with both excessive heating and cooling rates. The research will be carried out on trendy metal grades in which the phenomena occurring during interactions with excessive-energy beams usually are not totally acknowledged but.

Our S690Q is a structural steel grade and is produced to give high yield strength during usage. The material can be heat treated using quench and temper techniques. These EN 10025 6 Plates have good forming and welding properties. S690Q plates have higher payload capacity and are energy efficient, hence can be used in leaner structures.S690Q / 1.8928 SteelNumber Chemical composition Nominal thickness = 50(mm) CEV max = 0.65 Nominal thickness from 50 to 100 (mm) CEV max = 0.77 Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum values given in order to obtain the specified propertiesEN 10025 S690QL Brown McFarlaneHigh strength quenched and tempered steel plate can be easily welded and fabricated. We often find that steel plate to EN 10025 S690QL is called different things by different engineers. Plate to this specification and grade is variously described asHigh Strength Quenched and Tempered Steel Plate. If you have requirement for high strength steel plate,please contact us by email.

EN 10025-6 S690Q strength steel
Tagged on: