charge EN 10025-6 S620Q strength steel bike u-lock with cable
Gangsteel produce and supply materials of EN10025-6 S620q steel plate and equal grade S590Q, S690Q, S690QL, S690QL1, WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E S620q steel plate Executive standard: EN10025-6, GB/T16270-2009.
EN10025-6 S620q Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 degree .
Chemical composition of steel S620Q (1.8914), Standards of steel S620Q (1.8914) and Mechanical Properties of steel S620Q (1.8914) Equivalent grades of steel S620Q (1.8914)
about the steel S620Q (1.8914) Tensile Strength, Elongation, Proof strength , Hardness, please see our table.
Our S690Ql is a structural steel grade and is produced to supply extreme yield power throughout utilization. This steel is utilized in several functions similar to heavy transportation, growth industry, machine building, and lifting gear. We ship EN S690Q steel plate provider merchandise in customizable decisions to meet buyer-specified necessities. In the case of high-energy connections the situations for non-weathering structural steels as given in DIN part 1 apply. for welding are additionally given in EN 1011 half 1 and part 2 – Welding, Recommendations for welding of metallic materials-. Corten steel is a copper chromium alloy steel – this alloy shows a higher degree of resistance to atmospheric weathering when in comparison with other unalloyed steels.
- What is EN 10025-6 S620Q steel plat?
EN10025-6 S620Q steel plate is EN 1.8914, Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 ° C. The main adopt standard are EN 10025-6: 2004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 10137-2: 1996 S620Q Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels
- What is EN 10025-6 S620Q OR 1.8914 Chemical composition % of steel EN 10025-6 S620Q (1.8914): EN 10025-6-2004
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
V |
N |
Nb |
Ti |
Cu |
Zr |
B |
CEV |
max 0.2 |
max 0.8 |
max 1.7 |
max 2 |
max 0.025 |
max 0.015 |
max 1.5 |
max 0.7 |
max 0.12 |
max 0.015 |
max 0.06 |
max 0.05 |
max 0.5 |
max 0.15 |
max 0.005 |
max 0.83 |
- What is Mechanical properties of steel EN 10025-6 S620Q (1.8914)?
Nominal thickness (mm): |
3 – 100 |
100 – 150 |
Rm – Tensile strength (MPa) |
700-890 |
650-830 |
- What is Equivalent grades of steel EN10025-6 S620Q (1.8914)
EU |
Germany |
France |
European old |
|||
S620Q |
|
|
|
EN10025-6 EQUAL Grade stock list in China warehouse |
|||||||
|
Grade |
size mm |
Thick mm |
Wide mm |
Long mm |
Tons |
Quantity |
High-strength structural stee plate |
BS960E |
7*1600*11300 |
7 |
1600 |
11300 |
2.023 |
2 |
|
Q550CFD |
16*2500*12000 |
16 |
2500 |
12000 |
3.768 |
1 |
|
Q550CFD |
16*2500*12000 |
16 |
2500 |
12000 |
3.768 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q690CFD |
30*2550*10640 |
30 |
2550 |
10640 |
6.39 |
1 |
|
SC960E |
30*1550*5800 |
30 |
1550 |
5800 |
2.117 |
1 |
|
NQB-S690QL |
20*1700*11000 |
20 |
1700 |
11000 |
2.936 |
1 |
|
BS700MCK2 |
8*1500*13000 |
8 |
1500 |
13000 |
1.227 |
1 |
|
BWELDY620QL6 |
12*2400*6220 |
12 |
2400 |
6220 |
1.406 |
1 |
|
BWELDY620QL6 |
12*2400*9000 |
12 |
2400 |
9000 |
2.035 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.239 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
5.181 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
1.884 |
4 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
2.12 |
1 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
0.707 |
1 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
0.706 |
1 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
2 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
1 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
1 |
|
BS700MCK2 |
12*1500*13000 |
12 |
1500 |
13000 |
1.837 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
1.696 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
4.522 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
4.522 |
1 |
For unprotected use care must be taken that the welded joint is also climate resistant. This is feasible by using welding consumables matching the bottom material.
Stainless metal types 1.4301 and 1.4307 are also known as grades 304 and 304L respectively. DeskripsiIWF or I-Beam, INP is a sizzling-rolled metal beam with H-shaped cross part, used primarily in piling and retaining structures.
En Series Metal Chart
There stays, nevertheless, a query regarding the importance of hydrogen transport by cell dislocations in materials having restricted slip distances because of complicated microstructures and large dislocation densities, such as at a crack tip. Turnbull concludes that ‘it is most related to determine the lattice hydrogen content as the most effective measure of the severity of the environment and of the driving pressure for diffusion in a concentration gradient’. The take a look at outcomes point out that the AE detectability of defects in all investigated HSLA-steel plate was very poor apart from one material. Subsequent microscopic examination of the microstructure and the fracture surfaces showed that differences in morphology of brittle phases in combination with the utilized stress condition most probably account for the variations in AE behaviour. Being essentially a standard steel, reuse and recycling are largely unaffected by the alloy additions.
- The metal has been developed to be used in features just like mining and quarrying, course of trade, materials coping with, growth, and earth shifting.
- Designers, engineers, and plant operators attempt to reduce weight and improve the effectivity of apparatus.
- There are vital advantages available via using excessive power quenched and tempered steels for optimum structura efficiency in excessive working environments.
- 690QL1 is a extreme energy nice grained quenched and tempered structural metal.
It allows for the redistribution of stresses in steady members and at factors of extreme native stresses, comparable to at holes or different discontinuities. In conclusion low heat enter welding processes keep the delicate zone small and the facility excessive. The steel has been developed for use in features just like mining and quarrying, course of business, materials dealing with, development, and earth shifting. Designers, engineers, and plant operators try to reduce weight and improve the effectivity of equipment. There are vital benefits to be had via the use of high power quenched and tempered steels for max structura efficiency in excessive working environments. 690QL1 is a extreme power fantastic grained quenched and tempered structural metal.
Menyukai Ini:
EN10025-6 S620Q steel black steel rod
7. Obtained German TUV certification.
S620Q steel plate uses: used to manufacture low-temperature resistant, high-strength key components, construction machinery, mining machinery structures, etc. It is a high-strength structural steel plate.
European elevation strength alloy steel plate: S460Q, S460QL, S460QL1, S500Q, S500QL, S500QL1, S550Q, S550QL, S550QL1, S590Q, S620Q, S620QL, S620QL1, S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QQL, S960QQL1,
WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E, etc.;
JFE Steel herein introduces the features and characteristics of “JFE-HITEN” collection. To obtain passable weld steel properties the welding parameters must be limited with growing yield power. Acceptable properties for an S690 metal are normally obtained with cooling instances between 6 s and 20 s. For lower cooling times the hardness of the warmth affected zone may exceed limiting values with the risk of introducing cracks, see Figure 11. On the other hand, long cooling occasions result in poor strength and toughness values. If we think about the mechanical properties within the as quenched situation, the energy is significantly larger than required however the material is just too brittle for many structural purposes.
Structural steelworksbridges, bridge components, parts for offshore buildings. Pressure vesselsfixed and transportable storage tanks, vessels.S690Q Steel Plates Manufacturer in China, S690Q Steel The S690Q grade is austenitic in nature appropriate for heavy engineering works. They are fully focusing on providing clients with the highest notch high quality of plates and different important services.
It will come as no shock that the development business is the biggest shopper of structural steel, the place it’s used for numerous capabilities. S355J2 is a medium tensile, low carbon manganese metal which is instantly weldable and possess good impact resistance (additionally in sub-zero temperatures). This material is usually equipped throughout the untreated or normalized state of affairs. Gangsteel is specialized in producing and exporting carbon steel plates, stainless-steel plates and carbon steel profile stainless steel profile Material.
The most uses of the s420mc high power steel plates are seen in ship building, offshore oil drilling industries and in the building of bridges. S890 metal plate is a quenched and tempered excessive strength metal plate with series grades of s890q, s890ql and s890ql1. It is a low carbon non alloy structural steel EN10025-6 S620Q steel plate supplier plate with European commonplace en . In order to ensure its efficiency, the carbon content material of this kind of metal plate is lower than 0.2%. There are different grades similar to S420M, S460M, S460Q, S500Q, 550Q, 620Q and many others.
Equivalent grades of steel S620Q (1.8914)Equivalent grades of steel S620Q (1.8914)Heat treatment conditions+A Soft annealed+AC Annealed to achieve spheroidization of the carbides+AR As rolled+AT Solution annealed+C Cold drawn / hard+CR Cold rolled+FP Treated to ferrite-pearlite structure and hardness range+I Isothermal annealing+LC Cold drawn / soft+M Thermo mechanical rolling+N Normalized+NT Normalized and tempered+P Precipitation hardened+PE Peeled+QA Air quenched and tempered+QL Liquid quenched and tempered+QT Quenched and tempered+S Treated to improve shearability+SH As rolled and turned+SR Cold drawn and stress relieved+T Tempered+TH Treated to hardness range+WW Warm worked+U Untreated
Related KeywordEN S960Q equal, EN S960Q metal plate, EN S960Q metal equivalent, EN S960Q chemical composition, EN S960Q materials. If you wish to get the EN S960QL structural metal plates metal worth, please do not hesitate to contact us.