EN 10025-6 S620Q strength galvanized steel

Gangsteel produce and supply materials of EN10025-6 S620q steel plate and equal S590Q, S690Q, S690QL, S690QL1, WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E S620q steel plate Executive standard: EN10025-6, GB/T16270-2009.
EN10025-6 S620q Alloy special steel with specified minimum values of at temperatures not lower than -20 degree .
Chemical composition of steel S620Q (1.8914), Standards of steel S620Q (1.8914) and Properties of steel S620Q (1.8914) Equivalent grades of steel S620Q (1.8914)
about the steel S620Q (1.8914) Tensile Strength, Elongation, Proof strength , Hardness, please see our table.

as the welding warmth input enhance as much as 30.9kJ/cm, the changes of microstructure and affect toughness had been small. Hot rolled merchandise of structural steels Technical delivery circumstances for flat merchandise of high yield power structural steels in the quenched and tempered condition of this doc, along with half 1, specifies requirements for flat products of extreme yield power alloy explicit steels. EN S620Q S620 Q STEEL PLATE BBNSTEEL Grade EN S620Q Specification THK three to 300,Width 1500 to 4050,Length 3000 to Standard Technical delivery situations for flat products of excessive yield strength structuralEN S620Q Carbon and Low-alloy High-energy SteelEN S620Q Carbon and Low-alloy High-energy Steel Plate.WHY CHOOSE US? DIN EN S690Q /S690QL/S690QL1 Condition of Delivery quenched and tempered. Structural steelworksbridges, bridge components, parts for offshore constructions.

kia seltos EN 10025-6 S620Q strength steel

  • A wide variety of s690ql metal options are available to you, corresponding to chilly rolled, scorching rolled.
  • China United Iron and Steel Limitedoffers structural steel plate that meets the European standard for structural metal.
  • S355 structural grade carries minimum yield strength of 355 N/mm²m, the JR designation confirms that the link for you steel has undergone longitudinal Chary V-Notch impact testing at 27J at room temperature.
  • Defines necessities for flat products of high yield power alloy particular steels.
  • DIN EN S690QL Non- Alloy Structural Steel Plate TJC Steel can provide DIN EN S690QL Structural Carbon Steel Plate, mainly utilized in development within the fields requiring carbon metal plates with kinds of impact tests and strength.

DIN EN S690QL Non- Alloy Structural Steel Plate TJC Steel can provide DIN EN S690QL Structural Carbon Steel Plate, primarily used in construction within the fields requiring carbon steel plates with sorts of influence checks and energy. Defines requirements for flat merchandise of high yield strength alloy special steels.
For constructional steelwork even plates of a hundred and twenty mm have been produced and applied effectively notably in bridges. It shouldn’t be neglected that numerous different branches began with the appliance of extreme power steel plate earlier. Mobile crane building makes use of at present steel grades up to a yield stress of 1100 MPa; within the offshore business thermo-mechanically rolled steels in bigger energy lessons are more likely to be the metallic most likely probably the most typically used for cold water functions.
EN 10025-6 S620Q strength steel for bridges
It serves good resistivity in the direction of crevice and pitting cracking subjected to impression loads.S690QL Plate, S690QL Steel Plates, S690QL Quenched and What is S690QL Steel Plate Legally licensed industry Rexton metallic & alloys are busy in supplying the great and engaging top quality of S690QL PLATES globally. A methodology of warmth remedy for assuaging this drawback often known as tempering and requires the quenched metal to be re-heated though this time to underneath the lower important temperature. The outcome’s to place toughness and ductility again in to the metal and, although a couple of of the yield power of the quenched steel is misplaced, the tip results EN10025-6 S620Q steel plate supplier of the quenching and tempering course of is to offer a strong steel which can be easy to weld, bend, and fabricate generally. S690QL A high energy structural metal supplied in quenched and tempered situation. The metal is designed to offer glorious welding and bending properties and it presents substantial potentialities for financial savings in material costs, processing and handing. The grades and qualities are given in Tables 2 to four and Tables 5 to 7 and are supplied throughout the quenched and tempered state of affairs as given in 6.three. Comparing with and S620QL,steel plate S620Q has extra incorporates of chemical components P and S in .

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: Admin@gangsteel.com
Phone: TEL: 0086-13598879167

We produce and export EN S620Q high strength steel plate to max thickness 300mm
We have 3000tons High strength stock list steel plate, Faster delivery, Competitive price,

en10025-6 S620q steel plate technical parameters
Similar materials of S620q steel plate: S590Q, S690Q, S690QL, S690QL1, WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E S620q steel plate Executive standard: EN10025-6, GB/T16270-2009 
S620q steel plate chemical elements: Cu Mo Nb Ni Ti V Zr ≤0.50≤0.70≤0.06≤2.0≤0.05≤0.12≤0.15
Mechanical properties of S690Q steel plate: Yield strength σ0.2 (MPa) Tensile strength σb ( MPa) Elongation (δ5 %) -20��V type impact energy (longitudinal) 590-650  770-940 ≥14≥30
��Specification range: thickness 8-350mm width 1500-4020mm length 3000mm-18800mm.

Technical provide situations for structural steels with improved atmospheric corrosion resistance COMPARE GRADES EN Hot rolled merchandise of structural steels. The extreme-strength structural metallic at seven hundred MPa In the unending battle for improved efficiency of metal merchandise, a lot less weight wins. DIN EN S620Q Non- Alloy Structural Steel Plate TJC Steel can supply DIN EN S620Q Structural Carbon Steel Plate, mainly used in development in the fields requiring carbon steel plates with sorts of influence checks and power.
S355 structural grade carries minimal yield energy of 355 N/mm²m, the JR designation confirms that the link for you steel has undergone longitudinal Chary V-Notch impact testing at 27J at room temperature. China United Iron and Steel Limitedoffers structural steel plate that meets the European commonplace for structural steel. A wide variety of s690ql metal options are available to you, corresponding to chilly rolled, scorching rolled. You can also select from steel coil, metal plate, and alloy steel bar s690ql steel, in addition to from a53 s690ql steel, and whether s690ql steel is ship plate, container plate, or boiler plate.

En10025 S460nl Metal Plate

Nevertheless, this textual content focuses on the high strength metal plate grades which are today utilized in metal constructing in Europe although we know that engineers in this subject can revenue a lot from the good experience made in different branches. In order to make sure that the tensile power of the weld steel fulfils the necessities of the bottom metallic, the heat enter and interpass temperature must be restricted during welding. Experience has shown that the welding circumstances must be chosen so that the cooling time t eight / 5 does not exceed 20 seconds. Depending on the thickness of the and the manufacturing situations, the manufacturer might add to the metal one or a number of alloying elements up to the maximum values given to be able to acquire the specified properties. abs grade ah36 shipbuilding and offshore industries metal Has been devoted to the of export metal business greater than 10 years.

S690Q is a hot-rolled hardened structural steel that has undergone subsequent tempering and conforms to the EN , DSTU EN normal. Minimum values of impression vitality for influence tests on transverse V-notch check pieces for quenched and tempered steel, when the influence check on transverse test pieces is agreed at the time of the order. The distinctive conclusions on have an effect on of the chosen welding process information steel arc for the premise passes and steel energetic gasoline for the filling and overlaying passes) on impression toughness of the high-energy low-alloyed steels are drawn. The paper moreover presents dialogue on the valid necessities and recommendations associated to welding of those steels, from the aspect of functions in design of steel welded constructions. API 5L X65 PSL1 Pipe is a excessive yield seamless pipe that’s modified to suit offshore structural functions. It is meant to be used in fastened offshore constructions and is designed to operate in the offshore sector. ASTM A283 plate steel options low and intermediate tensile strength carbon steel plate of structural high quality.

Equivalent grades of   steel   S620Q (1.8914)Equivalent grades of   steel   S620Q (1.8914)Heat treatment conditions+A Soft annealed+AC Annealed to achieve spheroidization of the carbides+AR As rolled+AT Solution annealed+C Cold drawn / hard+CR Cold rolled+FP Treated to ferrite-pearlite structure and hardness range+I Isothermal annealing+LC Cold drawn / soft+M Thermo mechanical rolling+N Normalized+NT Normalized and tempered+P Precipitation hardened+PE Peeled+QA Air quenched and tempered+QL Liquid quenched and tempered+QT Quenched and tempered+S Treated to improve shearability+SH As rolled and turned+SR Cold drawn and stress relieved+T Tempered+TH Treated to hardness range+WW Warm worked+U Untreated

We think about it too, to offer S690QL1 structural metal plates like JFE 780LE, EN S690Q, EN S690QL, etc. that not solely have high mechanical forte however in addition toughened plates by means of warmth treatment that avoid ruptures, thereby guaranteeing safety onboard. Victor Steel is likely one of the Leading Manufacturer, Suppliers of EN S690Q quenched and tempered steel plate, s690q steel plate, in Mumbai,India.Structural steel plate suppliersThis methodology of cooling, often known as quenching, induces a metamorphosis within the crystalline construction of the steel which leaves it a lot more sturdy. Unfortunately the metal on this situation could be very brittle and it isn’t potential to make use of it in a lot of capabilities. Metline is a specialized supplier of EN S620Q steel and plates. We can offer EN S620Q strain vessel steel plates in a wide range of thickness and sizes at affordable prices. EN S620Q is both out there as ex–inventory or immediately shipped from the mill to our customers across the globe. Quenched and tempered heat therapy steel plate and sheet S690QL under EN _ 6 standard is the same as the .
S620QL steel plate

  1. What is EN 10025-6 S620Q steel plat?
    EN10025-6 S620Q steel plate is EN 1.8914, Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 ° C. The main adopt standard are EN 10025-6: 2004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

  EN 10137-2: 1996 S620Q  Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels

  1. What is EN 10025-6 S620Q OR 1.8914 Chemical composition %   of   steel  EN 10025-6  S620Q (1.8914):   EN 10025-6-2004

C

Si

Mn

Ni

P

S

Cr

Mo

V

N

Nb

Ti

Cu

Zr

B

CEV

max   0.2

max   0.8

max   1.7

max   2

max   0.025

max   0.015

max   1.5

max   0.7

max   0.12

max   0.015

max   0.06

max   0.05

max   0.5

max   0.15

max   0.005

max   0.83

 

  1. What is Mechanical properties of   steel   EN 10025-6 S620Q (1.8914)?

Nominal thickness (mm):  

3 – 100

100 – 150

Rm – Tensile strength (MPa)

700-890

650-830

  1. What is Equivalent grades of   steel  EN10025-6 S620Q (1.8914)

EU
EN

Germany
DIN,WNr

France
AFNOR

European old
EN

S620Q

StE620V

E620TR

FeE620V

 

EN10025-6 EQUAL Grade stock list in China warehouse 

 

Grade

size mm

Thick mm

Wide mm

Long mm

Tons

Quantity

High-strength structural stee plate

BS960E

7*1600*11300

7

1600

11300

2.023

2

 

Q550CFD

16*2500*12000

16

2500

12000

3.768

1

 

Q550CFD

16*2500*12000

16

2500

12000

3.768

1

 

Q550CFD

20*2500*12000

20

2500

12000

4.71

1

 

Q550CFD

20*2500*12000

20

2500

12000

4.71

1

 

Q550CFD

20*2500*12000

20

2500

12000

4.71

1

 

Q550CFD

36*2500*9500

36

2500

9500

6.712

1

 

Q550CFD

36*2500*9500

36

2500

9500

6.712

1

 

Q550CFD

36*2500*9500

36

2500

9500

6.712

1

 

Q550CFD

36*2500*9500

36

2500

9500

6.712

1

 

Q690CFD

30*2550*10640

30

2550

10640

6.39

1

 

SC960E

30*1550*5800

30

1550

5800

2.117

1

 

NQB-S690QL

20*1700*11000

20

1700

11000

2.936

1

 

BS700MCK2

8*1500*13000

8

1500

13000

1.227

1

 

BWELDY620QL6

12*2400*6220

12

2400

6220

1.406

1

 

BWELDY620QL6

12*2400*9000

12

2400

9000

2.035

1

 

BS700MCK2

10*1500*4000

10

1500

4000

4.239

1

 

BS700MCK2

10*1500*4000

10

1500

4000

4.71

1

 

BS700MCK2

10*1500*4000

10

1500

4000

5.181

1

 

BS700MCK2

10*1500*4000

10

1500

4000

4.71

1

 

BS700MCK2

10*1500*4000

10

1500

4000

4.71

1

 

BS700MCK2

10*1500*4000

10

1500

4000

1.884

4

 

BS700MCK2

10*1500*6000

10

1500

6000

2.12

1

 

BS700MCK2

10*1500*6000

10

1500

6000

0.707

1

 

BS700MCK2

10*1500*6000

10

1500

6000

0.706

1

 

BS700MCK2

12*1500*12000

12

1500

12000

3.391

2

 

BS700MCK2

12*1500*12000

12

1500

12000

3.391

1

 

BS700MCK2

12*1500*12000

12

1500

12000

3.391

1

 

BS700MCK2

12*1500*13000

12

1500

13000

1.837

1

 

BS700MCK2

12*1500*4000

12

1500

4000

1.696

1

 

BS700MCK2

12*1500*4000

12

1500

4000

4.522

1

 

BS700MCK2

12*1500*4000

12

1500

4000

4.522

1


This is applicable when using applicable filler supplies of a corresponding yield power class. Structural steelworksbridges, bridge components, elements for offshore buildings. Pressure vesselsfixed and portable storage tanks, vessels.S690Q Steel Plates Manufacturer in China, S690Q Steel The S690Q grade is austenitic in nature appropriate EN S690Q steel plate supplier for heavy engineering works.

EN 10025-6 S620Q strength steel for bridges