EN 10025-6 S620Q strength steel reinforcement
Gangsteel produce and supply materials of EN10025-6 S620q steel plate and equal grade S590Q, S690Q, S690QL, S690QL1, WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E S620q steel plate Executive standard: EN10025-6, GB/T16270-2009.
EN10025-6 S620q Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 degree .
Chemical composition of steel S620Q (1.8914), Standards of steel S620Q (1.8914) and Mechanical Properties of steel S620Q (1.8914) Equivalent grades of steel S620Q (1.8914)
about the steel S620Q (1.8914) Tensile Strength, Elongation, Proof strength , Hardness, please see our table.
Equivalent grades of steel S620Q (1.8914)Equivalent grades of steel S620Q (1.8914)Heat treatment conditions+A Soft annealed+AC Annealed to achieve spheroidization of the carbides+AR As rolled+AT Solution annealed+C Cold drawn / hard+CR Cold rolled+FP Treated to ferrite-pearlite structure and hardness range+I Isothermal annealing+LC Cold drawn / soft+M Thermo mechanical rolling+N Normalized+NT Normalized and tempered+P Precipitation hardened+PE Peeled+QA Air quenched and tempered+QL Liquid quenched and tempered+QT Quenched and tempered+S Treated to improve shearability+SH As rolled and turned+SR Cold drawn and stress relieved+T Tempered+TH Treated to hardness range+WW Warm worked+U Untreated
Conquest Steel & Alloys supply A1100QL Structural Steel plates to international businesses that demand metal plates with excellent material properties, superior power, resistance to abrasion and prime finished. Conquest Steel & Alloys has an elaborate range of S235 structural excessive tensile steel plates, celebrated for their flexibility and sustainability. Our Structural metal merchandise assist customers to meet their important project requisites in a value-efficient manner. Conquest Steel & Alloys are suppliers of A514 grade Structural Steel plates, customary to suit a spectrum of structural necessities.
There is a wide range of steel grades for strip steels appropriate for cold forming. Minimum values of yield strength and tensile power are specified within the related product commonplace BS EN 10346. For design, the mechanical properties are derived from minimal values specified in the related product commonplace.
The type and diploma of coating safety required is determined by the degree of publicity, location, design life, and so on. In many circumstances, underneath inner dry conditions no corrosion protection coatings are required aside from appropriate hearth safety.
Given the aforementioned properties, high-energy steel delivered in a quenched and tempered situation is broadly utilized in heavy engineering, construction and other industries. The manufacturing of heavy-duty above-floor, underground and lifting machinery accounts for more than 70% of quenched metal plate consumption. Gangsteel is specialised in tremendous thick low alloy, high energy steel plate and cooperated with ABS, BV, DNV, CCS, GL, LR, KR, NK, and RINA Classification Society to approve the super thickness plate to 300mm now. Specialty Steel Company is one of the largest metric metal distributors in the U.S. We inventory an in-depth stock of metrics in alloys, stainless steels, chrome plated bars, threaded rod and keystock. Steel sub-grades JR, J0, J2, K2 characterize the ability of steel to behave in a ductile manner and due to this fact avoid brittle fracture, particularly at low temperatures. The fracture toughness of steel is characterised in EN in terms of the KV worth i.e. the impact power in Joules required to fracture a Charpy V-notch specimen at a given take a look at temperature T.
6. According to specific requirements: high temperature stretching, simulated post-weld heat treatment and control element content can be done.
High-power metal can be purchased by way of the global sales network of 38 gross sales offices in Europe, Asia, Africa and America, in addition to sixteen metallic service centres in Ukraine, and authorised sellers. Due to their excessive energy, weldability and resistance to brittle cracking, TMCP metal merchandise could be applied in constructions with operating temperatures of as much as -50 °C with assured values of influence power. High-energy steel is manufactured in reversing mills by scorching deformation of semi-finished steel merchandise such as repeatedly solid or rolled slabs. Plates undergo strengthening therapy both in the final phases of rolling and cooling within the mill or by heat treatment offline. Structural Steel plate is a speciality of Conquest Steel and Alloys, stockist, supplier and exporter of Stainless Steel, Carbon Steel and Nickel Alloy pipes and plates in India.
EN 10025-6 S620Q strength steel plate
It is quickly cooled or ‘quenched’ to provide steel with high energy and hardness, but low toughness. The toughness is restored by reheating it to 600°C, maintaining the temperature for a particular time, and then permitting it to chill naturally . The use of high tensile metal can scale back the amount of metal wanted but the steel must be robust at working temperatures, and it also needs to exhibit adequate ductility to face up to any ductile crack propagation. Therefore, higher strength steels require improved toughness and ductility, which can be achieved solely with low carbon clean steels and by maximizing grain refinement. The implementation of the thermomechanical rolling course of is an environment friendly way to obtain this.
- The numerous requirements for the grades of steel in the above table insist on a minimal value for ductility so the design assumptions are valid and if these are specified appropriately the designer may be assured of their enough efficiency.
- For chilly rolled and hot rolled strip, the required strengths are 10-17% higher.
- Specified mechanical properties of common stainless steels to EN DescriptionGradeMinimum 0.2% proof power (N/mm2)Ultimate tensile strength (N/mm2)Elongation at fracture (%)Basic chromium-nickel austenitic steels1.
- Ductility is a measure of the diploma to which a fabric can strain or elongate between the onset of yield and eventual fracture underneath tensile loading as demonstrated within the determine under.
EN S890QL is both obtainable as ex–stock or immediately shipped from the mill to our shoppers across the globe. S1100QL & S1300QL are excessive yield metal with a minimum energy of 1100&1300 MPa respectively. S1100QL according to EN is a quenched and tempered metal and is relatively easy to bend and weld. Specified mechanical properties of widespread EN10025-6 S620Q steel plate supplier stainless steels to EN DescriptionGradeMinimum 0.2% proof strength (N/mm2)Ultimate tensile energy (N/mm2)Elongation at fracture (%)Basic chromium-nickel austenitic steels1. For cold rolled and hot rolled strip, the required strengths are 10-17% greater.
- What is EN 10025-6 S620Q steel plat?
EN10025-6 S620Q steel plate is EN 1.8914, Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 ° C. The main adopt standard are EN 10025-6: 2004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 10137-2: 1996 S620Q Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels
- What is EN 10025-6 S620Q OR 1.8914 Chemical composition % of steel EN 10025-6 S620Q (1.8914): EN 10025-6-2004
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
V |
N |
Nb |
Ti |
Cu |
Zr |
B |
CEV |
max 0.2 |
max 0.8 |
max 1.7 |
max 2 |
max 0.025 |
max 0.015 |
max 1.5 |
max 0.7 |
max 0.12 |
max 0.015 |
max 0.06 |
max 0.05 |
max 0.5 |
max 0.15 |
max 0.005 |
max 0.83 |
- What is Mechanical properties of steel EN 10025-6 S620Q (1.8914)?
Nominal thickness (mm): |
3 – 100 |
100 – 150 |
Rm – Tensile strength (MPa) |
700-890 |
650-830 |
- What is Equivalent grades of steel EN10025-6 S620Q (1.8914)
EU |
Germany |
France |
European old |
|||
S620Q |
|
|
|
EN10025-6 EQUAL Grade stock list in China warehouse |
|||||||
|
Grade |
size mm |
Thick mm |
Wide mm |
Long mm |
Tons |
Quantity |
High-strength structural stee plate |
BS960E |
7*1600*11300 |
7 |
1600 |
11300 |
2.023 |
2 |
|
Q550CFD |
16*2500*12000 |
16 |
2500 |
12000 |
3.768 |
1 |
|
Q550CFD |
16*2500*12000 |
16 |
2500 |
12000 |
3.768 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q690CFD |
30*2550*10640 |
30 |
2550 |
10640 |
6.39 |
1 |
|
SC960E |
30*1550*5800 |
30 |
1550 |
5800 |
2.117 |
1 |
|
NQB-S690QL |
20*1700*11000 |
20 |
1700 |
11000 |
2.936 |
1 |
|
BS700MCK2 |
8*1500*13000 |
8 |
1500 |
13000 |
1.227 |
1 |
|
BWELDY620QL6 |
12*2400*6220 |
12 |
2400 |
6220 |
1.406 |
1 |
|
BWELDY620QL6 |
12*2400*9000 |
12 |
2400 |
9000 |
2.035 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.239 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
5.181 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
1.884 |
4 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
2.12 |
1 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
0.707 |
1 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
0.706 |
1 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
2 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
1 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
1 |
|
BS700MCK2 |
12*1500*13000 |
12 |
1500 |
13000 |
1.837 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
1.696 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
4.522 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
4.522 |
1 |
Sticky Pads Adhesive Double Sided For Car License Fixing Stickers Number Plate Roller
This course of refines the grain size and improves the mechanical properties, particularly toughness. Normalized-rolled is a course of the place the temperature is above 900°C after rolling is completed. This has a similar effect on the properties as normalizing, but it eliminates the additional process of reheating the fabric. Mechanical working takes place because the metal is being rolled or formed.
S460q Tensile
This can lead to hardening of the ‘heat affected zone’ and to lowered toughness. The higher the thickness of fabric, the larger the reduction of toughness.