EN10025-6 S550QL 1.8926 steel round bar

EN 10025-6 S550QL 1.8926 high strength steel box section

Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate: Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤
150mm.

This heterogeneity ends in appreciable scatter throughout the indentation load-displacement traces and complicates inverse evaluation of this knowledge. To cope with this drawback, an improved and optimised inverse evaluation process to estimate bulk tensile properties of heterogeneous provides using a model new ‘multi-aim’ function has been developed which considers nano-indentation data obtained from numerous indentation web sites. The technique was applied to S355 structural metallic bulk samples as well as an autogenously electron beam welded pattern where there’s an area variation of fabric properties. The finish result’s to place toughness and ductility again in to the metallic and, though numerous the yield vitality of the quenched steel is misplaced, the very best outcomes of the quenching and tempering course of is to supply a strong metal which may be easy to weld, bend, and fabricate generally. In Europe the structural metal specification EN contains a vary of excessive power quenched and tempered metal grades and the designation S690QL provides the parameters for metal with a minimal yield vitality of 690 MPa. The manufacturing of the S690QL – ESSAR PLATES is completed by utilizing premium high quality of alloy that’s actually sourced from reliable market distributors.

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: admin@gangsteel.com
Phone: whatsapp: 0086-13598879167

Gangsteel produce EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate
, ,

EN 10025-6 S550QL 1.8926 high strength steel square tube

The research evaluates numerically and experimentally the influence of welding heat enter parameters on the microstructure and hardness of the warmth-affected zone of quenched and tempered and thermo-mechanically managed course of 690-MPa excessive-power metal. Numerical analyses and experimental comparisons had been utilized utilizing three heat enter values (10, 14, and 17 kJ/cm) to have the power to foretell the thermal fields throughout welding. Experimental evaluation was carried out of the microstructure and microhardness habits in a number of HAZ areas. Amongst others, our product portfolio includes steels with larger yield level inside the tempered state in accordance with DIN EN .

s550ql

What is different in EN10025-6 S550Q S550QL and S550QL1?

S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.

What is EN10025-6 S550QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis

5≤t≤50

0.65%

50<t≤100

0.77%

100<t≤150

0.83%

What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions

 

EN10025-6 S550QL Mechanical Properties

Grade

Thickness

Yield Strength

Tensile Strength

Elongation

Charpy V Notch Impact Test

Degree

Min Value

S550QL

mm

Min Mpa

Mpa

Min %

-40℃

J

5≤t≤50

550

640-820

16%

30

50<t≤100

530

640-820

30

100<t≤150

490

590-770

30

Note: Impact energy for impact test is on longitudinal

EN10025-6 S550QL Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

N

B

S550QL

0.22

0.86

1.80

0.025

0.012

0.016

0.006

Cr

Cu

Mo

Nb

Ni

Ti

V

1.60

0.55

0.74

0.07

2.1

0.07

0.14

EN 10025-6 S550QL 1.8926 kia high strength steel

However, current design necessities for fireplace resistance of metallic constructions are primarily based totally on the investigation of scorching-rolled carbon steel with regular energy, much like delicate metal. Hence, an experimental program has been carried out to evaluation the mechanical properties of each excessive vitality metallic and delicate metallic at elevated temperatures.

EN S620Q S620 Q STEEL PLATE BBNSTEEL Grade EN S620Q Specification THK 3 to 300,Width 1500 to 4050,Length 3000 to Standard Technical delivery conditions for flat merchandise of excessive yield energy structuralEN S620Q Carbon and Low-alloy High-energy SteelEN S620Q Carbon and Low-alloy High-energy Steel Plate.WHY CHOOSE US? 1.Best Quality-Steel plate from China First-Class mill with Die stamp embody warmth quantity and batch number,It might be tracked.2.Fast Delivery-Good relationship withEN Grade S620Q quenched and tempered (+QT Description.The tempered and nice grain weldable metal S620Q is used for constructions,corresponding to transport autos,lifting and earthmoving machines,load-carrying constructions and so forth.Lowest utility temperature -20 EN S620Q metal property#176;C. EN S550QL1 High yield energy metal plate owned the minimal yield vitality at 550 Mpa and tensile energy inside Mpa.The essential technical requirement when rolling steel plate S550QL1 accommodates quenching and tempering heat remedy,low temperature impacting examine beneath minus 60 centigrade.

Japan urges South Korea to end tariffs on steel bars after WTO ruling – Kyodo News Plus

Japan urges South Korea to end tariffs on steel bars after WTO ruling.

Posted: Tue, 01 Dec 2020 04:11:11 GMT [source]

With virtually 20 years’ expertise, Henan HZZ is now often known as actually one of many major producers and suppliers of en s690q carbon and low-alloy extreme-power steel plate with pwht. Depending on the thickness of the product and the manufacturing circumstances, the producer could add to the metal one or a number of alloying elements as a lot as the utmost values given in order to get hold of the specified properties. Pressure vesselsfixed and portable storage tanks, vessels.S690Q Steel Plates Manufacturer in China, S690Q Steel The S690Q grade is austenitic in nature appropriate for heavy engineering works. It serves good resistivity in direction of crevice and pitting cracking subjected to impression masses.S690QL Plate, S690QL Steel Plates, S690QL Quenched and What is S690QL Steel Plate Legally certified trade Rexton steel & alloys are busy in supplying the wonderful and desirable high quality of S690QL PLATES globally. They are absolutely focusing on providing shoppers with the top notch high quality of plates and other important services. Decreased hardness in the CGHAZ of TMCP metallic (240 HV0.1) was attributable to main recrystallization of the microstructure and the formation of additional equilibrium merchandise of austenite decomposition.

The subsequent technique of EN GRADE S690QL PLATES is Photochemical machining which is tightly managed corrosion course of. The minimal content of 0,015 % applies to soluble aluminum, this worth is considered attained if the entire aluminum content material materials is a minimum of 0,018 %; in case of dispute the soluble aluminum content material shall be decided. The comparability results revealed the need EN S690Q metallic plate provider of proposing specified design suggestions for supplies properties of chilly-common extreme energy steel at elevated temperatures. S620Q STEEL PLATE_Steel SupplierBBNSTEEL exported EN .2 Certificate of ABS,DNV,LR,BV Class Approval material S620Q,EN S620Q,S620Q STEEL PLATE. S620Q metal plate is very utilized in manufacturing plants, basic improvement and all kinds of building equipment, corresponding to mining and building of varied types of drilling rigs, electric shovels, electrical wheel anti-cart, mining autos, excavators, loaders, bulldozers, Cranes, coal mine hydraulic assist, and other mechanical tools and completely different items of machinery. Alloy metallic is a metal that has had small portions of numerous alloying elements very like much like manganese. As the plates manufacturing is completed by making good use of optimum prime quality of alloy, it tends to supply many good properties. As the plate’s manufacturing is accomplished by making good use of optimum high quality of alloy, it tends to offer many good properties.

EN 10025-6 S550QL 1.8926  high strength steel in vehicles

Unitedsteel Mill Supply High energy steel plate, and have numerous inventory size, If you require high power steel plate. Minimum values of impression vitality for impression exams on transverse V-notch check pieces for quenched and tempered metal, when the impact test on transverse take a look at items is agreed on the time of the order. The outcomes showed that the facility of mismatching of a welded joint introduced on a redirection of the crack propagation in direction of the low power area of the welded joint. In the cases of the overmatched welded joints containing a mild root layer it’s potential to attain a comparable fracture behaviour related to the homogeneous overmatched welded joint if the influence toughness of the gentle root layer is bigger than the impression toughness of the overmatched weld metallic. Such a type of welded joint is subsequently preferable for the welding of excessive power low alloy steels, on account of it permits the manufacturing of a welded joint with out preheating. The matter of the analysis, outcomes of that are provided on this paper, was experimental investigation of welded samples of the extreme power metal S690QL.

  • Gangsteel provide EN steel grade specification is a excessive yield power structural steels throughout the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade.
  • Product Description S620Q excessive energy steel plate moreover named as S620Q excessive power low alloy metallic plate under metal stand EN which is for warm rolled structural steels with extreme yield power and tensile energy in quenched and tempered provide state of affairs.
  • EN metallic grade specification is a high yield energy structural steels within the quenched and tempered condition metal plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade.
  • It specifies technical provide conditions for flat merchandise of excessive yield energy alloy specific steels.
  • Gangsteel provide EN metal grade specification is a excessive yield power structural steels throughout the quenched and tempered situation metallic plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

If a stress relieving warmth treatment is deliberate all through or after plate processing, this must also be thought-about when deciding on the filler supplies. To avoid hydrogen-induced chilly cracking, solely filler provides, which add little or no hydrogen to the underside metal, is also used. abs grade ah36 shipbuilding and offshore industries metallic Has been devoted to the of export metal enterprise larger than 10 years. Our service entails every sort of metal product , together with uncooked supplies and processed completed merchandise. The strategy of plasticity-based mostly distortion analysis for immediately mapping cumulative plastic strains into elastic fashions utilizing equal thermal strains was developed and utilized to the investigation of the characteristic relationship between cumulative plastic strains and angular distortion in fillet welded skinny EN S690Q steel plate supplier-plate T-joints.

Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.

EN 10025-6 S550QL 1.8926 high strength steel in vehicles
Tagged on: