EN 10025-6 S550QL 1.8926 high strength steel dowel pins
Content
Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate: Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤
150mm.
Documentation Where documentation is required that exceeds the traditional delivery standard, the fees invoiced will mirror actual costs. Atmospheric corrosion resistant metal is intended primarily to be used in structural members, the place savings in weight and added durability matter. Plate is utilized in truck frames, brackets, crane booms, rail vehicles and other compa rable applications. Proof stress values at elevated temperatures are included and properties within the work hardened situation. The steels are designated in accordance with BS EN and the steel numbers are allotted in accordance with BS EN . The steels are named according to BS EN and numbered in accordance with BS EN .
What is different in EN10025-6 S550Q S550QL and S550QL1?
S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.
What is EN10025-6 S550QL Carbon Equivalent: CEV?
| Thickness, mm |
Max CEV based on the ladle analysis |
|
5≤t≤50 |
0.65% |
|
50＜t≤100 |
0.77% |
|
100＜t≤150 |
0.83% |
What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions
|
EN10025-6 S550QL Mechanical Properties |
||||||
|
Grade |
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
Charpy V Notch Impact Test |
|
|
Degree |
Min Value |
|||||
|
S550QL |
mm |
Min Mpa |
Mpa |
Min % |
-40℃ |
J |
|
5≤t≤50 |
550 |
640-820 |
16% |
30 |
||
|
50＜t≤100 |
530 |
640-820 |
30 |
|||
|
100＜t≤150 |
490 |
590-770 |
30 |
|||
|
Note: Impact energy for impact test is on longitudinal |
||||||
|
EN10025-6 S550QL Chemical Composition |
|||||||
|
Grade |
The Element Max (%) |
||||||
|
C |
Si |
Mn |
P |
S |
N |
B |
|
|
S550QL |
0.22 |
0.86 |
1.80 |
0.025 |
0.012 |
0.016 |
0.006 |
|
Cr |
Cu |
Mo |
Nb |
Ni |
Ti |
V |
|
|
1.60 |
0.55 |
0.74 |
0.07 |
2.1 |
0.07 |
0.14 |
|
EN 10027-1 S550QL 1.8926 high strength steel plate
EN 10027-1 S550QL 1.8926 high strength steel chart
EN 10027-1 S550QL 1.8926 high strength steel sheet
EN 10027-1 S550QL 1.8926 high strength steel for sale
EN 10027-1 S550QL 1.8926 high strength low alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel sheet metal
EN 10027-1 S550QL 1.8926 high strength carbon steel plate
EN 10027-1 S550QL 1.8926 plate slenderness limits for high strength steel sections
EN 10027-1 S550QL 1.8926 what is high strength steel plate
EN 10027-1 S550QL 1.8926 a high strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plates
EN 10027-1 S550QL 1.8926 high strength stainless steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate australia
EN 10027-1 S550QL 1.8926 high strength weldable steel plate
EN 10027-1 S550QL 1.8926 ultra high strength steel plate
EN 10027-1 S550QL 1.8926 high yield strength steel plate
EN 10027-1 S550QL 1.8926 high strength alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate canada
For all deliveries and all recipients within the a) Federal Republic of Germany, on the basis of the GFT distance of the kilometer grading for truck transport, underneath level 15 of our value list. b) For all other recipients, in accordance with the space ensuing from the kilometer grading for truck transport, under level 15 of our price list, as proven in the “Uniform distance desk for international freight visitors ”.
Securities We shall be entitled to customary securities, enough in kind and dimension, for our claims, even when they are conditional or restricted in time. The standard contains solid steels to be used generally engineering including machinery , automotive, armament , agriculture and so on. These are products of various cross section shapes which are obtained after descaling, by drawing of hot rolled bar or rod on a draw bench. This involves cold deformation with out eradicating materials. This operation provides the product special features with respect to form, dimensional accuracy and floor finish. This course of leads to chilly engaged on the material. BS EN Stainless Steels -Part 3 Technical delivery situations for semi-completed merchandise, bars, rods and sections for general functions.
EN 10025-6 S550QL 1.8926 high strength steel vs mild steel
- VII Foreword and information for customers of this handbook , en s550ql metal structural metal DIN EN Structural metal I and H sections Tolerances on shape and di-EN10025 S275 Steel S275JR Properties, Equivalent, Meaning , en s550ql steel structural steelEN S275 Steel is a non-alloy structural metal grade, in accordance with EN10025, S275 gentle steel is mainly devided into S275JR (1.0044), S275J0 (1.0143) and S275J2 (1.0145).
- Please use the menu on the left to navigate to the available product teams.Standards for steel A handbook of tables from DIN C.three Structural metal tubes and hollow sections C.4 Steel pipes C.5 Steel tubes for for precision functions Subject index for requirements on CD-ROM.
- our mill have a few years experience in S960QL metal manufacturing technique.EN 10025Steel grades /numbers Steel NumberEN Hot rolled merchandise of structural steels.
- ASME SA537CL2,SA537CL2 Steel,SA537CL2 HIC,SA537CL2 NACE ASME SA537CL2,SA537CL2 Steel,SA537CL2 HIC,SA537CL2 NACE .Unitedsteel Bolier Plate Factory are specialised in producing and exporting ASME SA537 SA537CL2 NACE MR0175,MR0103 Boiler metal plate,Low alloy and high strength steel plate,12345NextE Worldwide equivalent gradesS550QL (1.8926) ,E European and wordwide Steel equivalent grades These comparison desk is just intended as an indication of the closest khown equal grades.The supply standarts should always be checked for the precise purpose for every material,in case of doubt1.
The regulation of the Federal Republic of Germany is solely applicable for all lawsuits between the Buyer and us. The turnover tax rules of the 6 EC Directive within the model in force on the time are legitimate for invoicing deliveries from one EU member state to another, until, in accordance with the 6th EC Directive, nationwide legislation prescribes a different regulation. Insofar as we are to cost turnover tax, the purchaser shall pay the respective turnover tax along with the agreed buy worth. Where customary, we shall ship the merchandise packed and protected in opposition to rust; prices shall be charged to the Buyer. Packaging, protective supplies and transport materials are not returnable. In the event of any harm occurring during transportation, the Buyer should instantly organize for an evaluation of the facts to be established by the responsible our bodies. Risk shall pass to the Buyer when the merchandise is handed over to the forwarding agent or the provider, but at the latest when it leaves the works or the warehouse.
EN 10025-6 S550QL 1.8926 high strength low alloy steel plate
Nippon Steel and ArcelorMittal plot Indian expansion blitz – Nikkei Asia
Nippon Steel and ArcelorMittal plot Indian expansion blitz.
Posted: Tue, 01 Dec 2020 02:00:00 GMT [source]
EN 10027-1 S550QL 1.8926 high strength steel plate
EN 10027-1 S550QL 1.8926 high strength steel chart
EN 10027-1 S550QL 1.8926 high strength steel sheet
EN 10027-1 S550QL 1.8926 high strength steel for sale
EN 10027-1 S550QL 1.8926 high strength low alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel sheet metal
EN 10027-1 S550QL 1.8926 high strength carbon steel plate
EN 10027-1 S550QL 1.8926 plate slenderness limits for high strength steel sections
EN 10027-1 S550QL 1.8926 what is high strength steel plate
EN 10027-1 S550QL 1.8926 a high strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plates
EN 10027-1 S550QL 1.8926 high strength stainless steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate australia
EN 10027-1 S550QL 1.8926 high strength weldable steel plate
EN 10027-1 S550QL 1.8926 ultra high strength steel plate
EN 10027-1 S550QL 1.8926 high yield strength steel plate
EN 10027-1 S550QL 1.8926 high strength alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate canada
EN 10025-6 S550QL 1.8926 high tensile strength steel plate
S690QL1 has the steel number 1.8988 based on EN and is out there on an ex stock foundation in thicknesses from 6 mm to 250 mm. S690QL1 is used for cranes, flood gates, bridges and lots of different applications where high strength is required with decreased weight and straightforward machinability. API 5L X65 PSL1 Pipe is a excessive yield seamless pipe that is modified to go well with offshore structural purposes. It is intended to be used in mounted offshore constructions and is designed to operate within the offshore sector. 09CuPCrNi-A is a weather resistant steel created by alloying copper, chromium and nickel.
EN 10027-1 S550QL 1.8926 high strength steel plate
EN 10027-1 S550QL 1.8926 high strength steel chart
EN 10027-1 S550QL 1.8926 high strength steel sheet
EN 10027-1 S550QL 1.8926 high strength steel for sale
EN 10027-1 S550QL 1.8926 high strength low alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel sheet metal
EN 10027-1 S550QL 1.8926 high strength carbon steel plate
EN 10027-1 S550QL 1.8926 plate slenderness limits for high strength steel sections
EN 10027-1 S550QL 1.8926 what is high strength steel plate
EN 10027-1 S550QL 1.8926 a high strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plates
EN 10027-1 S550QL 1.8926 high strength stainless steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate australia
EN 10027-1 S550QL 1.8926 high strength weldable steel plate
EN 10027-1 S550QL 1.8926 ultra high strength steel plate
EN 10027-1 S550QL 1.8926 high yield strength steel plate
EN 10027-1 S550QL 1.8926 high strength alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate canada
Repossession shall not represent a termination of the contract. The Buyer may avoid the authorized penalties described in paragraphs 3 to 4 by providing security within the quantity of our jeopardized declare for payment. The statutory provisions regarding default of cost shall remain unaffected.
Steel output in US retreats from previous week – Construction & Demolition Recycling
Steel output in US retreats from previous week.
Posted: Tue, 01 Dec 2020 03:09:36 GMT [source]
The purpose is to supply a logical, widespread sample,in which items are standardised in one doc only, reference being made to this doc from different standards. For example, tensile testing strategies are standardised in a different doc to materials property values, and dimensional tolerances in other separate requirements. Thus, changed necessities want solely to be written into one doc.
Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.