EN10025-6 S500Q 1.8924 carbon steel plate thickness

We supply and export EN 10025-6 steel plate S500Q 1.8924. EN10025-6 S500Q and 1.8924 cutting parts which specification is a high yield strength structural steels in the quenched and tempered. The condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel grade.

1. There is no code for the first level: S500Q: P: ≤0.025, S: ≤0.015;
2. The L-level code L is expressed as S500QL: P: ≤0.020, S: ≤0.010;
3. The L1 code L1 is expressed as S500QL1: P: ≤0.020, S: ≤0.010
4. The other ingredients are the same, as shown below:
C:≤0.20, Si:s0.80, Mn:s1.70, N:≤0.015, B:≤0.0050, Cr:s1 .50, Cu:0.50, Mo:0.70,
Nb: 0.06, Ni: s2.0, Ti: s0.05, V: ≤0.12, Zr: ≤0.15
3. Application and prospect of S500Q S500QL/S500QL1
S500Q applies construction machinery, mining machinery, coal mine machinery such as hydraulic supports, crane extension arms, crane extension arms,
Excavator support arm, etc.
Mainly used in the manufacture of hydraulic supports with high welding performance, heavy vehicles, construction machinery, and port machinery.
4. S500Q series steel plate low-alloy high-strength structural steel:
5, S500Q series steel plate series performance specifications: this trademark fulfills the EN 10025/6-2004 European standard specifications.
6. Packaging, marking and quality certificate of S500Q series steel plate: The packaging, marking and quality certificate of steel plate shall comply with the rules of GB/T 247

Unitedsteel Mill Supply High power metal plate, and have varied stock size, If you require excessive energy metal plate. Unitedsteel Mill Supply High strength steel plate, and have various inventory measurement, if you require high power steel plate, please contact us through Email to contact us.

EN10025-6 S500Q 1.8924 carbon steel plate rates

2.6.1 Manufacturing process The bolts shall be heat-treated underneath uniform circumstances, and hardened by quenching and tempering. The nuts shall be warmth-treated under uniform situations, and hardened by quenching and tempering; free slicing metal shall not be allowed. The washers shall be hardened by quenching and tempering.

4.3.2 Class 2 alternative metal materials Class 2 steel supplies are non-certified steel supplies which meet the fabric efficiency requirements via material testing, and are manufactured with permitted quality assurance. NOTE Materials not in the listing of licensed supplies can only be certified as Class 2 steel supplies, relying on the standard assurance offered by the producers. four.3.3 Class three various metal materials Class three steel supplies are steel materials which do not meet at least one of many two requirements – material efficiency requirements and high quality assurance requirements. four.four Special case As shown in Figure 1, licensed steel supplies which fail in reliability assessment could also be handled as Class 2 metal materials, on a case-by-case basis topic to approval by BCA, if their reliability can alternatively be assured via rigorous materials control and testing plans on web site. The current development in expertise of production and transportation of metal fibre-reinforced concrete allows its utilization in composite metal-concrete constructions.

S500Q, S500QL, S500QL1 Plates have larger payload capability and are energy efficient, therefore may be utilized in leaner constructions. eleven 2.5.three Chemical composition For bolts, based on product analysis, carbon content material shall not exceed 0.fifty five %; maximum content material of impurities shall be in accordance with the requirements given in Table 9.

Bolts with thread measurement within the vary of 12 mm to 36 mm; plain washers with or without chamfer and tension indicating washers, are coated in this part. NOTE References for materials efficiency requirements in this section embrace, in alphanumerical order, BS , BS , BS , BS , BS , BS , BS , BS , BS EN , BS EN , BS EN , BS EN , BS EN , BS EN , BS EN , BS EN (ISO 898-2) and BS EN ISO 898-1.

EN10025-6 S500Q 1.8924 1/4 inch carbon steel plate weight

• and 12 0.58 0.050 0.060 2.6.four Dimensional tolerances As a minimum, dimensional tolerances shall be in accordance with the corresponding standards which the bolts, nuts and washers are manufactured to.
• NOTE The nominal strengths given in Table 5 shall not be used as the stress power for design to BS 5950 (see BS ).
• 13 2.6.three Chemical composition For bolts, based mostly on product analysis, carbon content material shall not exceed 0.55 %; the utmost content material of sulphur and phosphorus shall not exceed 0.06 % each.
• The washers shall be produced from delicate metal.

NOTE 1 Interpolation for maximum content shall be allowed for design strength not given in Table 3 and Table 4. NOTE 2 Depending on the product thickness or variation in metallurgical process and supposed use, the requirements for chemical composition may differ and shall be referred to BS EN and BS EN . Table 3 — Chemical composition requirements for decent completed hole sections based mostly on ladle analysis Maximum content (% by mass) py (N/mm2 , primarily based on t 16 mm) CEV Pa S 235 0.41 0.040 0. .55 0.035 0.035 a For certain weathering steel, maximum phosphorous content material shall be allowed up to 0.15 %. 5 NOTE 2 Depending on the product thickness or variation in metallurgical process and meant use, the requirements for chemical composition may vary and shall be referred to BS EN , BS EN , BS EN , BS EN , BS EN and BS EN .

What is EN 10025-6 S500Q chemical?
EN10025-6 S500Q quenched and tempered steel plate Chemical composition

What is EN 10025-6 S500Q Equal Grade.
S500Q and S500QL steel plates are German standard high-strength structural steels, usually called high-strength plates, equivalent to the national standard Q500D,
It is widely used in construction machinery and mining machinery.
S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered. S500Q series are: S500Q, S500QL, S500QL1.Second, S500Q chemical composition: The quality of S500Q is divided into three levels

What is application of EN10025-6 S500Q?
Used in buildings, bridges, ships, vehicles, pressure vessels and other structures, the carbon content (melting analysis) is generally not more than 0.20%, the total content of alloying elements is generally not more than 2.5%, the yield strength is not less than 295MPa, and it has good impact toughness
And low alloy steel with welding function.

What is EN 10025-6 S500Q mechanical properties?
EN10025-6 S500Q quenched and tempered steel plate mechanical properties

EN 10025-6 S500Q carbon steel plate manufacturing process

For bolts for use for structural function, each individual bolt have to be properly marked to clearly indicate the grade. three.1.6 Non-conforming products The producer shall establish acceptable actions to be taken towards products not conforming to the nominal specifications.

As a minimum, the bodily condition and reconditioning requirements given in 6.2.2.1, 6.2.2.2, 6.2.2.three, 6.2.2.four and 6.2.2.5 shall type the quality test regime to verify the reusability of the materials to be reused. In addition, different requirement may be prescribed by the Qualified Person, if deemed essential. The move of reusability of used metal materials is proven in Figure 3. 6.2.2.1 Surface situation All surfaces of the metal supplies shall be visually inspected. At least 85% of the metal surface shall be freed from rust, and the corrosion condition shall not be more severe than Grade C in accordance with BS EN ISO . Should minor repair be required, maintenance actions to be taken embrace cleansing using water jets, blasting, priming, grinding and weld restore.

Description by Manufacturer
Sell: EN10025-6 S500Q, S500QL, S500QL1 Steel plate
1. Steel Grade :EN10025-6 S500Q, S500QL, S500QL1 S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.
2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm
3. Adopt Standard: EN 10025-6.
4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate
6. Payment Item: 30% TT, or LC and TT
7. Trade Terms: FOB, CFR, CIF
8. Delivery Time: 30-40days