Stainless Steel En 1 4404 Aisi 316l X2crnimo17
We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.
Information given on this information sheet concerning the condition or usability of materials respectively merchandise are no guarantee for their properties, but act as an outline. The info, we give on for advice, comply to the experiences of the producer in addition to our own.
Contents of ferrite up to 10% have a beneficial effect and don’t affect the corrosion resistance typically. The thinnest layer as potential should be welded (stringer bead approach) because the next cooling pace decreases the addition to sizzling cracks. A preferably fast cooling must be aspired whereas welding as properly, to avoid the vulnerability to intergranular corrosion and embrittlement. With avoiding oxidation within the seam surface throughout laser beam welding by applicble backhand welding, eg.
Pickling of the previously brushed seam space is carried out by dipping and spraying, nonetheless, usually pickling pastes or options are used. This knowledge sheet applies to stainless-steel 316L / 1.4404 hot and cold-rolled sheets/plates and strip, semi-finished merchandise, rods, rolled wire and profiles in addition to seamless and welded tubes for pressure functions.
Width: 1000mm,1219mm,125mm0,1500mm,2000mm,or required
Our stainless production range
- The use of a higher alloyed filler steel could be essential as a result of solid structure of the weld steel.
- When choosing the filler metallic, the corrosion stress has to be regarded, as properly.
- Austenitic steels solely have 30% of the thermal conductivity of non-alloyed steels.
F316/l, Tp316/l, 1.4404, 1.4401 – Stainless Steel
Fusion welding performance for 316 chrome steel is excellent both with and with out fillers. Recommended filler rods and electrodes for 316 and 316L are the same as the bottom steel, 316 and 316L respectively.
While processing solely stainless instruments like steel brushes, pnematic picks and so forth are allowed, in order to not endanger the passivation. It must be neglected to mark inside the welding seam zone with oleigerous bolts or temperature indicating crayons. The high corrosion resistance of this chrome steel is predicated on the formation of a homogeneous, compact passive layer on the floor. Annealing colours, scales, slag residues, tramp iron, spatter and such like should be eliminated so as to not destroy the passive later. For cleaning the surface the processes brushing, grinding, pickling or blasting (iron-free silica sand or glas spheres) may be applied.
The steel is modified for machining and has very good corrosion resistance. The steel is commonly used for details within building and development, process industry.
The metal grade 1.4404 (also known as ASTM 316/ 316L and ≈ SS2348) is a stainless ” acid-proof” metal which is easy to machine. The metal has improved machinability by, MAXIVAL®, and it’s appropriate for manufacturing of corrosion resistant merchandise by machining. 1.4404 has a very good corrosion resistance which make it useful within a variety of areas.
We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.
Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean