a240 304ln matweb

Content

a240-304ln waterjet cutting disc
A240 304LN 1/2 inch stainless plate Exporter
A240 304LN 304 stainless steel plate yield strength Exporter
A240 304LN stainless steel plate johor Exporter

Gangsteel produce and exported stainless steel plate ASTM A240 304LN UNS 30453, astm a240 304ln,astm a240 type 304ln,a240 304n material cutting parts,a240-304ln machine parts,a240 304ln flat bar ,a240 304ln welded pipe.

A240 304LN 7/16 stainless steel plate Exporter

The strain courses of the fittings vary in accordance with the fabric grade, nominal bore size and the wall thickness. As a leading Stainless Steel Pipe Fittings producer in India we produce these fittings to operate underneath numerous environmental conditions and in different types. There are different dimensions to these fittings similar to lengthy radius, quick radius, 1D, 2D and so forth. The Chromium Nickel Stainless Steel 1D Bend for instance is made up of a chromium nickel grade of stainless-steel with a diameter that matches 1 times the outer diameter of the pipe that it’s being fitted to. Buttweld fittings could be a butt-welded associated pipe fittings, it is easy for set up and help. There are numerous numerous sorts of BW fittings and they’re the identical in dimensions and schedules because the pipe.

But the additional price of butt weld is larger for establishment, considering labor value and talented welder. Socket Welding and Threaded Forged FittingsANSI B16.25Butt-welding ends.MSS SP43Wrought chrome steel butt-welding fittings. 1.3 Mechanical property necessities don’t apply to tubing smaller than 1/8 in.

A240 304LN 7/16 stainless steel plate Exporter

a240-304ln waterjet cutting disc

Stainless steel butt-weld fittings or we are able to additionally say butt-welded related pipe fittings are straightforward and reliable of their performance corresponding to installation and upkeep. We procure quality raw supplies from reputed manufacturers in India & Europe to manufacture A Stainless Steel pipe fittings and A Stainless Steel flanges according to ASME, EN, ISO and DIN standards.

What is SUS304LN AND A240 304LN? SUS304LN corresponds to GB 00Cr18Ni10N and German DIN X2CrNiN1810. SUS304LN (18Cr-8Ni-N-low C) adds N to SUS304 steel to make it have the same performance as above. The purpose of SUS304LN stainless steel is the same as that of SUS304N1 steel, but its resistance to intergranular corrosion is better.
SUS304LN corresponds to GB 00Cr18Ni10N and German DIN X2CrNiN1810.

ASTM A403 WP304 Butt welding fittings may be supplied in either seamless or welded construction and are lined by specification ASTM A403M and ASME B16.9. Ltd. was established in 1985 and have 3 decades of expertise in manufacturing pipe fittings and flanges in accordance to ASME B16.9/ B16.11 with dedication to provide world class high quality to our customers at competitive price through the use of innovative production system and course of. Stainless Steel Buttweld Pipe Fittings StandardStainless Steel Seamless Fittings DescriptionASTM A182/A182MForged or rolled alloy steel pipe flanges, cast fittings and valves and elements for top temperature service. 1.2 The tubing sizes and thicknesses often furnished to this specification are 1/4 in. Stainless Steel Seamless pipe is shaped by drawing a strong billet over a piercing rod to create the hole shell. As the manufacturing process doesn’t embody any welding, seamless pipes are perceived to be stronger and extra dependable.

A240 304LN 1/2 inch stainless plate Exporter

Opinion: Trump should avoid new steel tariffs – The Virginian-Pilot – The Virginian-Pilot

Opinion: Trump should avoid new steel tariffs – The Virginian-Pilot.

Posted: Sun, 15 Nov 2020 23:08:24 GMT [source]

The makes use of of chrome steel butt-weld fittings are to vary the instructions of the pipes and tubes for example, butt-welded pipe becoming elbow of 45-degree is use to turn the direction of the pipes and tubes by forty five-levels. There are various kinds of butt-welded pipe fittings similar to elbow, tee, bends etc. ASTM A403 WP304L Standard specification covers the standard for wrought austenitic stainless steel fittings for pressure piping purposes.

Gangsteel is the large factory who produce 304LN Stainless steel plate at China .304LN��S30453��UNS S30453��SUS304LN��1.4311��022Cr19Ni10N��00Cr18Ni10N. The adopt standard are GB/T24186-2009��GB/T20878-2007 ASTMA240/ASME SA-240 ASTMA276��ASTMA182/ASME SA-182��ASTMA312/ASMES A312��JISG4051��JISG4303��EN10028/2-2009

A240 304ln stainless steel plate supplier at China

Gangsteel main grade is Main business: 440C, 2205, incoel718, suh660, 600 alloy, C276 alloy, Invar36, S31254, S30815, 11Cr17, S17400, F6NM, A286 alloy, Invar36, 0Cr17Ni4Cu4Nb, F6NM stainless steel, S21800, Nitronic60, S35750, S3276, high temperature alloys,

What is ASTM A240 304LN Stainless steel plate?
304LN stainless steel,Name: Austenitic stainless steel, Standards: AISI, ASTM, UNS Number: S30453 . 304LN features and applications: Austenitic stainless steel, equivalent to 00Cr19Ni10 or 0Cr18Ni10 in our country, is the most common stainless steel. It is often used to make home appliances and containers. It is also a heat-resistant steel. Our commonly used stainless steel kitchenware is made of 304. Stainless steel fasteners can also be made.

304 is a stainless-steel material of the American standard, astm is 304, uns is s30403, for Chinese 0ci19ni9, German standard w-nr 1.4301, Japan is sus304, the United Kingdom is 304s15

Compared with 304L steel, 304LN adds N to improve the high strength and grain boundary corrosion resistance of structural parts.
304LN stainless steel use: structural use, chemical substance transport ship.

Hastelloy, duplex stainless steel, corrosion resistant alloy, precipitation hardening steel, Monel, Inconel, heat resistant alloy, martensitic stainless steel, austenitic stainless steel, special steel, special steel

A240 304LN chemical list	Content (%)
Chromium, Cr	18-20
Nickel, Ni	8-12
Manganese, Mn	2 max
Silicon, Si	1 max
Nitrogen, N	0.1-0.16
Phosphorous, P	0.045 max
Carbon, C	0.03 max
Sulfur, S	0.03 max
Iron, Fe	Remainder

A240 304LN Properties	Metric	Imperial
Tensile strength	515 MPa	74694 psi
Yield strength	205 MPa	29732 psi
Elongation at break (in 50 mm)	40%	40%
Hardness, Brinell	217	217
Hardness, Rockwell B	95	95

A240 304LN STANDARDS
INDUSTEEL TRADEMARKS		UNS	ASTM	EURONORMS EN	SUS
UR™ 304LN		S30453	304LN	1.4311 X2CrNiN18-10	SUS 304LN
A240 304LN CHEMICAL ANALYSIS (%WEIGHT)
C	Cr	Ni	Mo	N	Others
< 0,030	18,5	8,5	–	0,15

A240 304LN PROPERTIES
0,2 Y.S. – Rp 0,2min ASTM / EN		0,2 Y.S. – Rp 0,2(2) typical value		UTS – Rm min ASTM / EN		UTS – Rm(2) typical value		EI-A(1)%	PREN(4)	HOMOLOGATIONS
MPa	Ksi	MPa	Ksi	MPa	Ksi	MPa	Ksi			Last revised
270	39	335	49	550	80	630	91	45	21

A240 304LN APPLICATIONS
CHEMICAL INDUSTRIES			PROCESS INDUSTRIES			WATER TREATMENT			STORAGE & TRANSPORTATION
Nitric Acid	Sulfuric Acid	Polymer & other acids	Fertilizers	Pulp & Paper	Hydrome-tallurgy	Sea water & desalination	Fresh water & Tanks	Waste Water	Chemical Tanks	Cryogenic Tanks	Renewable

Our production Equipment introduction 3500MM Steckel Mill

Walking-beam reheating furnace, high pressure descales, coiling furnace, edger, four-high reversing mill, ACC, coiling machine, hot leveler, disc-type cooling bed, on-line UT defect inspection device, cold leveler, shot blaster etc. Annual Production Capacity-steel plates:960,000 tons, steel coils:240,000 tons 。
3500production capacity and scope
1） Hot rolled steel plates ：
Thickness ：4.5 ～50 mm
Width：910 ～3,100 mm
Length：3,000 ～18,000 mm
Piece weight：max. 22.6 t
2） Hot rolled steel coil ：
Thickness：4.5 ～25 mm
Width：1,600 ～3,000 mm
Piece weight：max. 45 t
Inner/Outer diameter:762 ～2,150 mm

The values said in every system is probably not actual equivalents; due to this fact, every system shall be used independently of the other. Combining values from the two techniques might result in non-conformance with the standard.

Contact Us

HENAN GANG IRON AND STEEL CO.LTD

Email: admin@gangsteel.com

Phone: whatsapp: 008613598879167

CN China

, ,

The fatigue power or endurance restrict is the utmost stress underneath which materials is unlikely to fail in 10 million cycles in air surroundings. The fatigue energy for austenitic stainless steels, as a gaggle, is commonly about 35 % of the tensile energy. Substantial variability in service results is skilled since further variables affect fatigue energy. In reality, the relevant product standards have very clear regulations on 304, and these product requirements have some variations for different shapes of stainless steel. For a stainless steel, the Ni component in its composition is very important, which directly determines the corrosion resistance and value of 304 chrome steel.

A240 304LN 304 stainless steel plate yield strength Exporter

304LN stainless steel steel specifications: round bars, forged round bars, plates, sheets, forgings, plates, round bars, forged rounds, forgings, coils, strips, small round bars.304LN stainless steel steel price description: stainless steel, alloy steel sales price, mold steel price, steel price, sales price,304LN stainless steel The main nicknames of steel: stainless steel, alloy structural steel, structural steel, aluminum, steel, die steel, die material, wear-resistant plate.304LN stainless steel Metal material name: alloy steel, stainless steel, aluminum, spring steel, wear-resistant plate, high-speed steel, carbon steel., car light round, forged round, smooth round, cold rolled

The relationship between 316, 316L and 316H is similar as that between the 304 collection of stainless steels. Specifications for another products, notably tube and pipe, have a carbon restrict of 0.035% or 0.040% most for 304L and 316L, nonetheless are otherwise the same. Gangsteel produce ASTM A Stainless metal A240 SS304LN supplier plates, S30400, A240 Type 304 Stainless steel slicing elements by water chopping, laser chopping and cnc slicing. Ordinarily, the cost of socket weld fittings is higher than butt weld fittings in comparable measurement.

A Stainless Steel covers the standard for wrought austenitic chrome steel fittings for strain piping functions. The material for fittings shall include stainless-steel forgings, chrome steel bars, stainless-steel plates, or seamless or welded stainless-steel tubular merchandise. Stainless Steel forging or shaping operations shall be carried out by hammering, pressing, piercing, extruding, upsetting, rolling, bending, fusion welding, machining, or by a mix of two or more of those operations. We stocks a wide range of materials and grades.Below are a listing of all standard stainless steel buttweld fittings materials and grades we stock.

ASTM A403 WP304L Standard specification covers the usual for wrought austenitic chrome steel fittings for pressure piping applications.
This is an approximate Cost of chrome steel buttweld pipe fittings in India.
There are various kinds of butt-welded pipe fittings similar to elbow, tee, bends and so forth.
ASTM A403 / A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings.The material for fittings shall include forgings, bars, plates, or seamless or welded tubular merchandise.
The makes use of of chrome steel butt-weld fittings are to vary the instructions of the pipes and tubes for instance, butt-welded pipe fitting elbow of 45-degree is use to turn the course of the pipes and tubes by 45-degrees.

Historically, seamless pipe was considered withstanding strain higher than other sorts, and was usually more obtainable than Welded Pipe. There are totally different software sorts corresponding to cryogenic temperature functions, elevated temperature and high pressure functions. As a leading SS Seamless Pipe Elbow Manufacture we produce the fittings starting from 1/16 inches to 48 inches in nominal diameters. The temperature vary of the products ranges from cryogenic to 1093 degrees Celsius relying on the material grade and the Stainless Steel Fittings Specification. Stainless Steel Buttweld Fittings are made up of several types of chrome steel and they can perform in several software conditions.

A240 304LN stainless steel plate johor Exporter

Gangsteel supply 304ln stock steel plate. SUS304LN (18Cr-8Ni-N-low C) adds N to SUS304 steel to make it have the same performance as above. The purpose of SUS304LN stainless steel is the same as that of SUS304N1 steel, but its resistance to intergranular corrosion is better. If you have requirement, please contact us by email.

A240 304LN 716 stainless steel plate Exporter

a240 304ln matweb

a240-304ln waterjet cutting disc

A240 304LN 1/2 inch stainless plate Exporter

Opinion: Trump should avoid new steel tariffs – The Virginian-Pilot – The Virginian-Pilot

A240 304LN 304 stainless steel plate yield strength Exporter

A240 304LN stainless steel plate johor Exporter

You May Also Like

A240 304LN stainless plates and bowls Exporter

410s hot rolled

A240 304LN 2 stainless steel plate Exporter