1 4301 Austenite Stainless Steel

We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.

Type 304 stainless steel is an austenitic grade that may be severely deep drawn. This property has resulted in 304 being the dominant grade used in purposes like sinks and saucepans. 304 austenite stainless steel is the American equal of grade 1.4301, and is the reason why there two terms are interchangeably used. Grade 1.4301 is the German equivalent grade of 304 sort chrome steel. Therefore it’s widely used in drawing utility such as sinks or pans.

Where 1.4301 is the EN material number and X5CrNi18-10 is the steel designation name. Let us take a look at more detailed material properties of 1.4301 Stainless Steel. Fusion welding performance for sort 304 chrome steel is great both with and without fillers. Recommended filler rods and electrodes for stainless steel 304 is grade 308 stainless steel.

It is used in the crude oil industry, chemical trade, petrochemical industry, automobile trade. In more corrosive environments corresponding to a marine surroundings, or an setting the place higher chloride and chlorine content material is a factor, a higher spec grade such as 316/316L or a Duplex grade may be a greater option.

Brand

Stock Thickness: 0.1-200.0mm
Production thickness: 0.5.0-200mm
Width: 600-3900mm
Length: 1000-12000mm
Grade:
200 series: 201,202
300 series: 301,304,304L,304H,309,309S,310S,316L,316Ti,321,321H,330
400 series: 409,409l,410,420J1,420J2,430,436,439,440A/B/C
Duplex: 329,2205,2507,904L,2304
Surface: No.1,1D,2D,2B,NO.4/4K/hairline,satin,6k,BA,mirror/8K

It is probably the most commonly stainless steel, and was known in older occasions as 18/8 stainless steel. The European grades for the 316 and 316L sorts, 1.4401 and 1.4404, match on all parts with carbon ranges of 0.07% maximum for 1.4401 and zero.030% maximum for 1.4404. There are additionally high Mo variations (2.5% minimum Ni) of 316 and 316L within the EN system, 1.4436 and 1.4432 respectively. To additional complicate mattters, there may be also grade 1.4435 which is both excessive in Mo (2.5% minimal) and in Ni (12.5% minimal).

• Grade 304/304L is the most extensively used commercial grade of stainless-steel provided into quite a few industry sectors.
• It is used within the crude oil business, chemical business, petrochemical trade, automobile business.
• It has wonderful corrosion resistance in odd atmospheric circumstances, it is simply machined and can be straightforward to weld.
• The stainless austenitic chromium-nickel steel 1.4301 shows good corrosion resistance (notably in pure environmental media and within the absence of appreciable chlorine and salt concentrations and sea water) and weldability.

At the completion of fabrication a full annealing operation should be employed to cut back inside stresses and optimise corrosion resistance. Deutsche Edelstahlwerke is a number one producer of special metal lengthy merchandise. Acidur 4301 is their model of standard 304 stainless steel. AISI 304 (1.4301) is a extensively-used austenitic chromium-nickel chrome steel.

Standards

The low carbon kind may be simpler to shape and form, which in turn may affect the degrees of residual stress left the metal after is forming and becoming up for welding. This could outcome within the ‘commonplace’ carbon varieties needing more drive to carry them in position as soon as fitted-up for welding, with extra of a bent to spring-back if not properly held in place. The data supplied on this datasheet has been drawn from numerous recognised sources, together with EN Standards, recognised industry references (printed & on-line) and producers’ information.

Aisi 304 (1. Stainless Steel

There is a view that the low carbon types are simpler to weld than the standard carbon types. Material supplied by the Company could range significantly from this data, but will conform to all relevant and applicable standards.

We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.

Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean