expanded steel metal EN10025-6 S550Q 1.8924 steel plate
Content
Our gangsteel S550Q Main Application:EN100256|S460Q|S460QL|S460QL1|S500Q|S500QL|S500QL1|S550Q|S550QL|S550QL1|S620Q|S620QL|S620QL1|S690Q|S690QL|S690QL1|S890Q|S890QL|S890QL1|S960Q|S960QL|S960QL1| is Widely Used In Construction of Bridges, Riveted, Bolted, And Other Structural Elements Included Drilling Machine, Power Shovel, Electricity Drive Wheel Counter- Mine Trolley, Mineral Product Automobile, Excavator, Car Loader.
All of our S690 QL EN 10025–6 structural steel Plates, EN10025 S690QL High Tensile Plate, is made and tried to worldwide tips, and specifications as per ASME, ANSI & ASTM, etc. If you have an interest in these aspects, please contact us. Many additional dislocations and plastic deformations have been found inside the fusion zone than the warmth-affected zone contained in the joint, which hardened the joints and lowered the influence toughness. The microstructures characterised by FTEM–energy-dispersive X-ray spectrometer moreover exhibited laths of M, in addition to stacking faults and dislocations that includes high-density, interfacial construction ledges that happen between the extreme-angle grain boundaries and the M and bainite. 590S/690S are economical to make the most of and have good weld performance with excessive toughness, due to they are produced by managed rolling or TMCP and optimized chemical composition. They are, subsequently, applicable for civil engineering and industrial tools, even in chilly areas.780S/980S quenched and tempered metallic plates can be discovered thicknesses of as a lot as 50 mm with alloying elements decreased to minimal quantities to supply good weldability and excessive financial system. We can supply the steel grades described as coil, slitted coil, sheets and cutted items.
Is becoming increasingly in style with engineers and designers seeking to exploit its power to weight ratio. Use of S890 steel will ensure larger payloads for lifting and transportation equipment. are specialised in producing and exporting S355J2, S355K2, S355K2 and So on.
- We are engaged in producing and promoting stainless steel, put on resistant metal plate, weathering steel plate, excessive energy carbon steel plate, alloy metal, boiler and Pressure vessel steel plate, we aslo produce steel pipes, coils and so forth.
- EN S550QL1 High yield power metal plate owned the minimum yield energy at 550 Mpa and tensile strength inside Mpa.The essential technical requirement when rolling steel plate S550QL1 incorporates quenching and tempering warmth therapy,low temperature impacting check beneath minus 60 centigrade.
- EN S550QL1 High yield strength metal plate owned the minimum yield energy at 550 Mpa and tensile power within Mpa.The essential technical requirement when rolling metal plate S550QL1 accommodates quenching and tempering heat remedy,low temperature impacting take a look at underneath minus 60 centigrade.EN S550QL1 Steel Plate are used in Construction of Bridges, Highway Construction and Other Engineering building.
ASTM A283 plate metal features low and intermediate tensile energy carbon steel plate of structural quality. We are engaged in producing and selling chrome steel, wear resistant metal plate, weathering steel plate, high power carbon steel plate, alloy metal, boiler and Pressure vessel metal plate, we aslo produce steel pipes, coils and so forth. EN S550QL1 High yield strength metal plate owned the minimal yield power at 550 Mpa and tensile power inside Mpa.The necessary technical requirement when rolling metal plate S550QL1 contains quenching and tempering warmth therapy,low temperature impacting test beneath minus 60 centigrade. EN S550QL1 High yield strength steel plate owned the minimal yield strength at 550 Mpa and tensile power inside Mpa.The necessary technical requirement when rolling steel plate S550QL1 contains quenching and tempering warmth treatment,low temperature impacting test beneath minus 60 centigrade.EN S550QL1 Steel Plate are utilized in Construction of Bridges, Highway Construction and Other Engineering construction. S690QL STEEL PLATES S690QL EN STEEL PLATES S690QL high yield metal plates available exstock at mm.
Gangsteel supply EN steel grade specification is a high yield energy structural steels within the quenched and tempered situation metal plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade. EN P420ML2 steel in Uganda p460ml2 worth – BDN STEEL ,steel coil kouhpayesteel BBNSTEEL provide EN P355M,P355ML1,P355ML2,P420M,P420ML1,P420ML2,P460M,P460ML1,P460ML2 steel plate EN P460M BBNSTEEL is specialised in supplying EN metal plate in P460ML2,EN P460ML2.Get Price.Stainless Steel 316 Sheet BBN STEEL Pressure EN S550QL
Gangsteel factory S550Q Steel Standard :EN10025-6,ASTM-A578/A578M,ASTM-A435/A435M,EN10160
Our Rolling Size: Thickness*Width*Length 3-600mm*1220-4200mm*5000-18000mm
UT (Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing),CR��Control Rolled����NR��Normalizing Rolled���� N(Normalized), Q+T(Quenched and Tempered), Z Direction Test(Z15,Z25,Z35) , Charpy V-Notch Impact Test(-20��,-40��), HIC test, NDT , PWHT( Simulated Post Weld Heat Treatment),NACE0175,The Third Party Test (Such as SGS Test), Coated or Shot Blasting and Painting.
Relative grade of EN10025-6:
steel sales company EN10025-6 S550Q 1.8924 steel plate
EN metal grade specification is a high yield energy structural steels within the quenched and tempered situation metal plate grade in S550Q,S550QL,S550QL1,S500Q,S890QL1,S960Q,S960QL,S620Q,S620QL,S690Q,S690QL,S690QL1,S890Q and S890QL steel plate grade.S550Q S550QL S550QL1 Steel plate,S550Q S550QL S550QL1 EN metal grade specification is a high yield strength structural steels within the quenched and tempered situation metal plate grade in S550Q,S550QL,S550QL1,S500Q,S890QL1,S960Q,S960QL,S620Q,S620QL,S690Q,S690QL,S690QL1,S890Q and S890QL steel plate grade.S500QL,S500QL1,S460Q,S460QL,S460QL1,S620QL1,BBNSTEEL provide EN steel grade specification is a excessive yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL,S500QL1,S460Q,S460QL,S460QL1,S620QL1,S550Q,S550QL,S550QL1,S500Q,S890QL1,S960Q,S960QL,S620Q,S620QL,S690Q,S690QL,S690QL1,S890Q and S890QL steel plate grade. S550Q high energy metal plate also named as S550Q high power low alloy steel plate beneath metal stand EN which is for decent rolled structural steels with excessive yield strength and tensile strength in quenched and tempered delivery situation.Quenching operation which consists of cooling a ferrous steel plate more rapidly than in still air.Tempering heat remedy utilized to a ferrous steel plate usually after quench hardening or different heat treatment to bring the properties to the required level.S550Q shall be accomplished low temperature impacting test beneath minus 20 centigrade.
steel companies alabama EN10025-6 S550Q 1.8924 steel plate
Alloy steels comprise quite a lot of steels comprising compositions that exceed the constraints of Si, Va, Cr, Ni, Mo, Mn, B and C allotted for carbon steels. In comparability with carbon steels, alloy steels are rather more acutely aware of mechanical and heat cures. Strenx® is extreme energy structural metallic with terribly fixed properties, making it good for designing trailer chassis. Shipbuilding requires massive portions of structural metallic plate to assemble to ship hull. Quenched and tempered warmth therapy steel plate and sheet S690QL beneath EN _ 6 commonplace is equal to the .
1. EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S460Q, S460QL, S460QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S690Q, S690QL, S690QL1, S890Q, S890QL1 and S890QL steel plate grade.
S550Q steel plate is a hydroelectric steel plate, which is a low-alloy high-strength steel plate. It is a German standard steel plate. It has the characteristics of high yield and more strengthening alloy elements.
Mechnical property for EN 10025-6 S550Q High strength steel:
| Thickness (mm) | |||
|
S550Q |
≥ 3 ≤ 50 |
> 50 ≤ 100 |
> 100 |
|
Yield strength (≥Mpa) |
550 |
530 |
490 |
|
Tensile strength (Mpa) |
640-820 |
640-820 |
590-770 |
2. Delivery status: delivery in quenched and tempered quenched and tempered state.
It is also possible to add flaw detection standard requirements, flaw detection level requirements, Z-direction performance requirements, requirements for adding special alloy elements, etc., but it needs to be communicated between the supplier and the buyer and indicated in the contract.
3. Executive standard: WYJ (Wugang Technology Research and Development Association Standard)
4. The chemical composition of S550Q steel plate (melting analysis)
Chemical composition % of the Product analysis of grade EN 10025-6 S550Q (1.8904)
| C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
V |
Nb |
Cu |
Ni |
B |
N |
Zr |
Ti |
|
0.22 |
0.86 |
1.8 |
0.8 |
0.03 |
0.017 |
1.6 |
0.74 |
0.14 |
0.07 |
0.55 |
2.1 |
0.006 |
0.016 |
0.17 |
0.07 |
C: <=0.22
Si:<=0.86 Si:<=1.80 P:<=0.030 S:<=0.017
N: <=0.0060
Cu: <=0.55
Mo:<=0.74 Cr:<=1.60 V:<=0.14 Nb:<=0.07
Ti: <=0.07
B: <=0.0060
Ni: <=2.10
5. Mechanical properties of S550Q steel plate:
Yield strength Tensile strength Elongation%
6. What is EN 10025-6 QT S550Q STEEL?
EN 10025-6 QT S550Q STEE also named as S550Q high strength low alloy steel plate under steel stand EN 10025-6 which is for hot rolled structural steels with high yield strength and tensile strength in quenched and tempered delivery condition.Quenching operation which consists of cooling a ferrous steel plate more rapidly than in still air.
Tempering heat treatment applied to a ferrous steel plate generally after quench hardening or other heat treatment to bring the properties to the required level.S550Q shall be done low temperature impacting test under minus 20 centigrade.
Implementation of flaw detection standards; China (JB4730 GB/T2970), the United States , Japan , Germany SEL072, Britain BS5996, France NFA04-305, and so on. In addition, you possibly can download the complete excerpt of our Quality Guide for the excessive-energy constructional metal by way of the link above. API 5L X65 PSL1 Pipe is a high yield seamless pipe that is modified to swimsuit offshore structural purposes. It is meant for use in fastened offshore structures and is designed to operate in the offshore sector. The minimal specified impact vitality when the temperature just isn’t lower than -60℃ is represented by L1.
The Refractory Materials Market for GCC Steel Industry Market is expected to grow by 28.96 MT during 2020-2024 progressing at a CAGR of 3% during the forecast period – PRNewswire
The Refractory Materials Market for GCC Steel Industry Market is expected to grow by 28.96 MT during 2020-2024 progressing at a CAGR of 3% during the forecast period.
Posted: Mon, 30 Nov 2020 18:30:00 GMT [source]
best lap steel EN10025-6 S550Q 1.8924 steel plate
Get an valued quotation for S550Q High Strength metal plate,NOW CONTACT XINSTEEL. EN S550QL1 Steel Plate are utilized in Construction of Bridges, Highway Construction and Other Engineering building,Gnee steel has sufficient inventory provide of EN10025 S550QL1 metal plate.If you need S550QL1 metal plate,pls be at liberty contact us. Leading Stockholder of S690QL Steel plates out there ex-stock at mm.
Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.