EN 10025-6 S550QL 1.8926 high strength steel tensile strength

EN 10025-6 S550QL 1.8926 high strength steel australia

Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate: Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤
150mm.

EN 10025-6 S550QL 1.8926 high strength steel grades used in north america

A extensive number of s690q steel options can be found to you, similar to technique, standard, and floor treatment. The whole processing and utility techniques are of basic significance to the reliability of merchandise produced from this metal. The person should ensure that his design, building and processing strategies are aligned with the fabric, correspond to the state-of-the-artwork that the fabricator has to adjust to and are suitable fort he intended use. The buyer is responsible for the choice of the fabric. The suggestions in accordance with EN und CEN/TR should be observed. S550QL is preferentially used by the customers for welded steel buildings inside mechanical constructions, plant constructions, structural steel works and hydropower, similar to machines for structural engineering, conveying vegetation, hoists, cranes, flood gates, bridges, frameworks and penstocks. Number of Tests Seamless and Electric Resistance Weld bending, flattening, tensile on one length of pipe from each lot of 500 lengths, or less, of every pipe size.

EN 10025-6 S550QL 1.8926 high strength steel casting

  • For use with CO 2ThyssenKruppSteelEurope aktueQQQz QbzwfQternetfQTKSE Kurzname EN Kurzname N A XTRA®M550 N A XTRA®M620 N A XTRA®M700 S550QL S620QL S690QL 1.8926 1.8927 1.8928 N A XTRA®550 N A XTRA®620 N A XTRA®700 S550QL1 S620QL1 S690QL1 1.8986 1.8987 1.8988 Werkstoffblatt 215, Ausgabe November2014, Seite 1 von 4 Datasheets Find a Data Sheet Millions Available Looking for a knowledge sheet?
  • The check items are taken and ready according to half 1 and 6 of EN 10025.High power nice grained structural steel Quenched andc The extra powerful grade E according to this knowledge sheet is out there up to a plate thickness of 200 mm.
  • Tests on every heat treatment unit could also be attainable on request.
  • Arrow has the biggest collection of free downloadable datasheets for tens of millions of elements.
  • The check items are taken and ready according to part 1 and 6 of EN 10025.
  • EN ISO A AWS A5.28 G sixty nine 6 M21 Mn4Ni1,5CrMo ER100S G / [ER100S 1(mod.)] Characteristics and typical fields of utility Low alloyed stable wire electrode for shielded arc welding of quenched and tempered and thermomechanically treated nice grained structural steels; for joint welding of wear resistant steels.

EN 10025-6 S550QL 1.8926 high strength steel pdf

FOUR HIGH MILL PLATES CUT TO LENGTH PLATES ; Steel grade designation Standard designation THICKNESS 1 from _ to in mm WIDTH 1 from _ to in mm THICKNESS 1 S620QL 4.0 one hundred.0 3,300 Steel Grade Equivalency TableClose SteelOrbis websites use cookies. By persevering with to browse the site you are agreeing to our use of cookies. For extra details about cookies and tips on how to manage them, see our cookie policy.cookie policy.SM490YB,JIS G3106 SM490YB, SM490YB Steel Plate, SM490YB,JIS G3106 SM490YB, SM490YB Steel Plate, SM490YB steel manufacturing unit SM490YB, JIS G3106 SM490YB, SM490YB Steel Plate, SM490YB metal manufacturing facility .

Japan urges S. Korea to end tariffs on steel bars after WTO ruling – Kyodo News Plus

Japan urges S. Korea to end tariffs on steel bars after WTO ruling.

Posted: Tue, 01 Dec 2020 04:04:17 GMT [source]

EN 10027-1 S550QL 1.8926 high strength steel plate
EN 10027-1 S550QL 1.8926 high strength steel chart
EN 10027-1 S550QL 1.8926 high strength steel sheet
EN 10027-1 S550QL 1.8926 high strength steel for sale
EN 10027-1 S550QL 1.8926 high strength low alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel sheet metal
EN 10027-1 S550QL 1.8926 high strength carbon steel plate
EN 10027-1 S550QL 1.8926 plate slenderness limits for high strength steel sections
EN 10027-1 S550QL 1.8926 what is high strength steel plate
EN 10027-1 S550QL 1.8926 a high strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plates
EN 10027-1 S550QL 1.8926 high strength stainless steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate australia
EN 10027-1 S550QL 1.8926 high strength weldable steel plate
EN 10027-1 S550QL 1.8926 ultra high strength steel plate
EN 10027-1 S550QL 1.8926 high yield strength steel plate
EN 10027-1 S550QL 1.8926 high strength alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate canada

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: admin@gangsteel.com
Phone: whatsapp: 0086-13598879167

Gangsteel produce EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate
, ,

EN 10027-1 S550QL 1.8926 high strength steel plate
EN 10027-1 S550QL 1.8926 high strength steel chart
EN 10027-1 S550QL 1.8926 high strength steel sheet
EN 10027-1 S550QL 1.8926 high strength steel for sale
EN 10027-1 S550QL 1.8926 high strength low alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel sheet metal
EN 10027-1 S550QL 1.8926 high strength carbon steel plate
EN 10027-1 S550QL 1.8926 plate slenderness limits for high strength steel sections
EN 10027-1 S550QL 1.8926 what is high strength steel plate
EN 10027-1 S550QL 1.8926 a high strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plates
EN 10027-1 S550QL 1.8926 high strength stainless steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate australia
EN 10027-1 S550QL 1.8926 high strength weldable steel plate
EN 10027-1 S550QL 1.8926 ultra high strength steel plate
EN 10027-1 S550QL 1.8926 high yield strength steel plate
EN 10027-1 S550QL 1.8926 high strength alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate canada

Kenwal Steel Names Stephen Eisenberg Chairman And CEO – PRNewswire

Kenwal Steel Names Stephen Eisenberg Chairman And CEO.

Posted: Mon, 30 Nov 2020 13:00:00 GMT [source]

A lot of the A36 products may also be twin/triple spec supplies with SA36, A709, and so on. Hardox The hottest structural put on plate – SSAB The most popular abrasion-resistant metal with excellent structural properties. Hardox® 450 is an abrasion-resistant steel with a nominal hardness of 450 HBW. Hardox® 450 combines good bendability and weldability with an possibility for assured influence toughness (Hardox® 450 Tuf). 321 Stainless Steel Aerospace Applications – Sandmeyer Steel Sandmeyer Steel Company is a number one supplier of 321 chrome steel plate.

s550ql

What is different in EN10025-6 S550Q S550QL and S550QL1?

S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.

What is EN10025-6 S550QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis

5≤t≤50

0.65%

50<t≤100

0.77%

100<t≤150

0.83%

What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions

 

EN10025-6 S550QL Mechanical Properties

Grade

Thickness

Yield Strength

Tensile Strength

Elongation

Charpy V Notch Impact Test

Degree

Min Value

S550QL

mm

Min Mpa

Mpa

Min %

-40℃

J

5≤t≤50

550

640-820

16%

30

50<t≤100

530

640-820

30

100<t≤150

490

590-770

30

Note: Impact energy for impact test is on longitudinal

EN10025-6 S550QL Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

N

B

S550QL

0.22

0.86

1.80

0.025

0.012

0.016

0.006

Cr

Cu

Mo

Nb

Ni

Ti

V

1.60

0.55

0.74

0.07

2.1

0.07

0.14

Join ArrowPerks and save $50 off $300+ order with code PERKS50. China Steel – Designations & Grades with Comparisons Check the China Steel designations and grades beneath for quite a lot of China Steel merchandise.

Products include steel bar, steel sheet, metal plate, structural steel, and steel tubes and steel pipes. Shop and purchase on-line metals at Coremark Metals previously Discount Steel. ASTM A283 plate metal features low and intermediate tensile power carbon metal plate of structural high quality. S550QL is a high energy quenched and tempered, nice grained structural metal with a minimal yield power of 550 MPa 2 in its delivery situation . Its mechanical properties are achieved by water quenching followed by tempering. P355GH, P295GH, 16Mo3, 13CrMo4-5, P265GH, Steel Plate… Applicationt Acura . Production Description Sell P355GH, P295GH, 16Mo3, 13CrMo4-5, P265GH, metal plate, EN .

EN 10025-6 S550QL 1.8926  high strength steel price per pound

S960QL metal is high yield power structural steels in the quenched and tempered delivery state. For S960QL steel plate tolerance the basic requirements shall be in in accordance with EN 10029, together with thickness tolerances to class A, unless in any other case agreed at the time of the order. Strenx®/Domex® 100XF metal is a thermostatically rolled sheet, one hundred% iron ore-based product with a minimal yield strength of 100ksi.

Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.

EN 10025-6 S550QL 1.8926 high strength steel price per pound