EN 10025-6 S550QL 1.8926 high strength steel identification
Content
EN10025-6 S550QL 1.8926 steel angle
Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate: Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤
150mm.
304 Stainless Steel Plate, is the most popular and economical of the stainless steels. 304 Stainless Plate provides good corrosion resistance to many chemicals as well as industrial atmospheres and marine environments. 304 Stainless Plate may become barely magnetic when labored and isn’t heat treatable. As part of the Murray Metals group, Murray Plate profit from access to in depth stockholding and established relationships with a community of high-quality metal mills around the globe. We inventory mill licensed plates from 2m x 1m as much as 12m x 3m. Longer plates are available from Fast Track mill rollings. Special Medium & Heavy Steel Plate Medium & heavy plate project of CITIC Special Steel is oriented to satisfy the wants of high-tech low-alloy excessive-strength structural plate, pipeline metal, bridge plate,excessive-rise structural plate, pressure vessel plate, boiler plate, shipbuilding plate and oil platform plate.
S550Q
S500QL1- according to EN with minimum impression values all the way down to -60°C (-76°F) Unitedsteel Mill Supply High strength steel plate, and have varied stock measurement, If you require high power steel plate. S550Q/QL/QL1 steel plate could possibly be utilized in Mechanical Engineering, suspension arm and others parts in machine. Gangsteel provide S550Q S550QL and S550QL1 EN metal plates immediately from our mill. apart from that, we also have many stock in hand in massive thickness. Gangsteel sincerely hope new and old prospects could inquiry our metal plates.
EN 10025-6 S550QL 1.8926 high strength low alloy steel ppt
From the analysis of mechanical properties, A36 and SS400 are extra equal, while Q235 materials is much less. EN S690QLS690 QLS690QL High Yield Steel PlatesS690QL Steel Plates suppliers in india- Victor Steel. Victor Steel is main suppliers of S690QL Steel Plates.we have Large inventory of EN S690QL plate.EN S690QL High Strength Structural Steel Plate value US $ /Ton. Henan East is a professional international firm specializing in the research, development, manufacturing, service and integrated options of steel products. Its primary enterprise covers the production of steel products, deep processing of steel products, customization of steel construction, and export of products.
- S550Q steel sheet materialS550Q metal sheet materials additionally could be referred to as as alloy structural metal.
- Henan HZZ offers a big selection of top of the range EN s550QL carbon and low alloy excessive strength steel plate with UT.
- Fast supply and good after gross sales service are additionally available.
- Alloy metal means this sort of grade contains some special alloy composition.
- 11MnNi5 three, 13MnNi6 three, 15NiMn6, S275NL S460NL, S275ML S460ML, P275NL2 P460NL2, P355ML2 P460ML2 ASTM A203 grade A/B, A333/A334 grades 1/6/7, A350 grade LF2/LF5/LF6, A352 grade LC1/LC2 High quality P275nl Steel Plate P275n Boiler Steel Plate.
The best designed and put in plate mills assure a long operating life, by way of changing markets as well as rising and bettering mill know-how. The key to a sustainable asset is modular know-how, permitting upgrades to be made as efficiently as potential in each time and price phrases.
EN 10025-6 S550QL 1.8926 high strength steel for machining
What is different in EN10025-6 S550Q S550QL and S550QL1?
S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.
What is EN10025-6 S550QL Carbon Equivalent: CEV?
| Thickness, mm |
Max CEV based on the ladle analysis |
|
5≤t≤50 |
0.65% |
|
50＜t≤100 |
0.77% |
|
100＜t≤150 |
0.83% |
What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions
|
EN10025-6 S550QL Mechanical Properties |
||||||
|
Grade |
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
Charpy V Notch Impact Test |
|
|
Degree |
Min Value |
|||||
|
S550QL |
mm |
Min Mpa |
Mpa |
Min % |
-40℃ |
J |
|
5≤t≤50 |
550 |
640-820 |
16% |
30 |
||
|
50＜t≤100 |
530 |
640-820 |
30 |
|||
|
100＜t≤150 |
490 |
590-770 |
30 |
|||
|
Note: Impact energy for impact test is on longitudinal |
||||||
|
EN10025-6 S550QL Chemical Composition |
|||||||
|
Grade |
The Element Max (%) |
||||||
|
C |
Si |
Mn |
P |
S |
N |
B |
|
|
S550QL |
0.22 |
0.86 |
1.80 |
0.025 |
0.012 |
0.016 |
0.006 |
|
Cr |
Cu |
Mo |
Nb |
Ni |
Ti |
V |
|
|
1.60 |
0.55 |
0.74 |
0.07 |
2.1 |
0.07 |
0.14 |
|
EN 10027-1 S550QL 1.8926 high strength steel plate
EN 10027-1 S550QL 1.8926 high strength steel chart
EN 10027-1 S550QL 1.8926 high strength steel sheet
EN 10027-1 S550QL 1.8926 high strength steel for sale
EN 10027-1 S550QL 1.8926 high strength low alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel sheet metal
EN 10027-1 S550QL 1.8926 high strength carbon steel plate
EN 10027-1 S550QL 1.8926 plate slenderness limits for high strength steel sections
EN 10027-1 S550QL 1.8926 what is high strength steel plate
EN 10027-1 S550QL 1.8926 a high strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plates
EN 10027-1 S550QL 1.8926 high strength stainless steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate australia
EN 10027-1 S550QL 1.8926 high strength weldable steel plate
EN 10027-1 S550QL 1.8926 ultra high strength steel plate
EN 10027-1 S550QL 1.8926 high yield strength steel plate
EN 10027-1 S550QL 1.8926 high strength alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate canada
EN 10025-6 S550QL 1.8926 high strength steel jelentése
EN steel grade specification is a excessive yield energy structural steels within the quenched and tempered condition metal plate grade in S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade. EN is Standard specifies Hot rolled merchandise of structural steels. Technical supply situations for flat products of high yield energy structural steels in the quenched and tempered condition.EN Standard major metal gradeS460Q, S460QL1, S460QL, S500QL, S500Q, S500QL1, S550Q, S550QL, S690Q, S690QL, S890Q, S890QL, S960QL and so on. EN steel grade specification is a excessive yield power structural steels within the quenched and tempered situation metal plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade.
US Steel closes on $63.4M in green bonds for Fairfield project – Birmingham – Birmingham Business Journal
US Steel closes on $63.4M in green bonds for Fairfield project – Birmingham.
Posted: Mon, 30 Nov 2020 17:07:00 GMT [source]
S355j2 High Strength Alloy Plate steel plate is structural steels, used for welding, bolting, and more riveted construction. ASTM ,EN, GB ,JIS,DIN. Boiler Quality Plate , S355 steel plates , Sailma 350 Plate , DIN/EN Plates , Pressure Vessel Steel Plate , High Tensile steel plates , CS Plate and ASTM A36 steel plate varieties and sizes. The restrict worth of the tensile strength with low carbon content material and commonplace is not more than 540Mpa, and it has good weldability, in widespread situations hot and cold crack are not simple to form. We are supplier exporter and stockist of carbon metal structural plate and boiler metal plate.
Underpinned by excellent and certified high quality management methods, Liberty Steel Dalzell has the information and experience working with clients’ on each a commercial and technical basis. S355 structural grade carries minimal yield energy of 355 N/mm²m, the JR designation confirms that the hyperlink for you steel has undergone longitudinal Chary V-Notch impression testing at 27J at room temperature.
Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.