Knife Steel & Handle Material Chart

We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.

The presence of molybdenum (Mo) improves the localized corrosion resistance. Other alloy metals are also used to improve the structure and properties of chrome steel similar to Titanium, Vanadium, and Copper. Non metallic additions usually embrace pure parts such as Carbon and Nitrogen as well as Silicon. The S304 we use to make our stainless casters has eight.07% nickel (Ni) and 18.23% chromium (Cr).

420J2 is suited to knife blades with gentle to medium use and routine applications. .004.0420HC – A greater carbon version of standard Type 420 martensitic stainless steel. The Carbon content, combined with the high Chromium content material, provides good abrasion resistance and edge-holding. This metal is to not be confused with commonplace 420 chrome steel.

It is magnetic in both the annealed and hardened circumstances. Maximum corrosion resistance is attained only within the fully hardened condition. 420HC Steel additionally presents good ductility when annealed and wonderful corrosion resistance properties when the steel is polished, floor ground or hardened.

Cold Rolled,Hot Rolled Stainless steel Plate and sheets

Stock Thickness: 0.1-200.0mm
Production thickness: 0.5.0-200mm
Width: 600-3900mm
Length: 1000-12000mm
Grade:
200 series: 201,202
300 series: 301,304,304L,304H,309,309S,310S,316L,316Ti,321,321H,330
400 series: 409,409l,410,420J1,420J2,430,436,439,440A/B/C
Duplex: 329,2205,2507,904L,2304
Surface: No.1,1D,2D,2B,NO.4/4K/hairline,satin,6k,BA,mirror/8K

• Other alloying components contribute to grain refinement which enhance blade power and edge toughness and also allow for a finer, sharper edge.
• The balance of carbon and chromium content give it a excessive diploma of corrosion resistance and likewise impressive bodily traits of power and edge holding.
• The following Powder Metallurgy steels include very excessive ranges of Chromium, which at 18–20% produces a steel matrix that is highly corrosion resistant.
• Edge retention in precise cutting checks exceeded blades made of the 420 and 440 collection of stainless steels.
• Third-generation powder metallurgy expertise steel.

The steadiness of carbon and chromium content material give it a high diploma of corrosion resistance and in addition impressive physical characteristics of strength and edge holding. Edge retention in actual chopping tests exceeded blades manufactured from the 420 and 440 collection of stainless steels. Other alloying components contribute to grain refinement which increase blade power and edge toughness and also allow for a finer, sharper edge. The following Powder Metallurgy steels comprise very excessive levels of Chromium, which at 18–20% produces a metal matrix that’s extremely corrosion resistant. Third-era powder metallurgy expertise metal.

It obtains about fifty seven HRC after suitable warmth therapy. 420HC ( 420C ) is a higher carbon content material 420 stainless. The HC stands for “excessive carbon” and it can be brought to the next hardness than common 420 and shouldn’t be mistaken for it. Buck Knives and Gerber Knives use 420HC extensively.420A (420J1) and 420B ( 420J2 ) are economical, extremely corrosion resistant stainless steel grades.

. Grand Way Gentleman’s Folding Knife

SK-5 is the Japanese equal of American 1080, a excessive carbon metal with carbon between 0.seventy five%-0.eighty five% and 0.60%-zero.90% manganese. As quenched, it has a hardness near Rc sixty five and produces a combination of carbon wealthy martensite with some small un-dissolved carbides.

Chrome Steel

It continues to be well-liked with many bushcrafters and survivalists due to its toughness and ease of sharpening. With a great warmth treat, the excessive carbon 1095 and O-1 tool steels could make excellent knives. Several metal alloys have carbon quantity shut or above three%. As usual these steels could be hardened to extremely excessive ranges, 65-67HRC.

We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.

Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean