0.5 mm metal sheet price

We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.

Type 301 stainless steel is an austenitic chromium-nickel stainless-steel that when cold labored supplies excessive strength and good ductility. This is why many manufacturers are cautious to use specialised metal alloys such as stainless steel for quite a lot of different applications.

To illustrate; in the Full Hard situation, it’s going to keep a minimum of 9% elongation in 2” as compared with Type 302 Full Hard at 2% roughly. This retained elongation on the part of Type 301 accounts for its great hardness, toughness and superior fatigue life within the finished part. Type 301 work-hardens excessively – For this purpose, its general demand is in the more durable tempers to meet the specific mechanical properties required by our clients. Type 301 is used within the annealed and chilly rolled situations. In the work-hardened situation, Type 301 develops higher tensile strength than the other stable austenitic grades.

Minimum properties for plate, sheet and strip per ASTM A240 and A666 comply with. Grade 301 stainless steel, with its larger carbon content (zero.15% in comparison with 304’s 0.08% by weight), can higher withstand mechanical pressure. In room temperature circumstances, grade 301 stainless can take as much as one hundred twenty ksi (kilopounds per sq. inch). The mechanical and physical properties of type 301 stainless steel make it a super material for a large number of functions both for industrial and consumer merchandise. These including Springs, Gaskets, Shims, Fasteners, Tools, Blades, Automotive Parts, Aerospace Components, Kitchen Utensils, and Tableware, Electrical Components and lots of others.

Our stainless production range

• Grade 301 has good resistance to oxidation at temperatures as much as 1550°F, however is not suggest to be used above 1600°F.
• 301 1/2 Hard (AMS 5518) materials has a miniumum tensile strength of 150ksi and is used in the fabrication of components that require strength and entails moderate drawing or forming.
• This excessive strength grade of steel is on the market in a number of circumstances or tempers.
• The mechanical properties for the different tempers of 301 are obtained by cold working and never by warmth treating.

Applications:

The rolling mill, also referred to as a roughing mill, reduces the thickness of the metal and it is cooled by water. The process of creating stainless involves mining chromite from underground mines.

It isn’t heat-treatable for hardening purposes and is non-magnetic as annealed, but slightly magnetic following cold working. Type 301 possesses good heat and corrosion resistance and welds simply.

301 half of Hard (AMS 5518) material has a miniumum tensile strength of 150ksi and is used in the fabrication of components that require strength and involves moderate drawing or forming. Type 301 is an austenitic chrome steel with a nominal composition of 17 % chromium and 7 percent nickel, which supplies good energy and ductility when cold worked. This high power grade of metal is out there in several situations or tempers.

Stainless Steel

United Performance Metals also provides 301 in its Full Hard, 1/2 Hard and 1/four Hard situations. Full Hard Cold Rolled – Type (chrome-nickel) Stainless Steel permits chilly working to the best mixture of mechanical properties desired for springs.

We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.

Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean