0.2 mm metal sheet provider

We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.


Also satisfactory for dissimilar combos of supplies with related ranges of alloying. However, management of hot cracking on this high silicon weld steel is dependent on some ferrite being present throughout solidification. Caution is therefore required when considering dilution by dissimilar which could promote fully austenitic solidification, such as sort 310 and different high nickel alloys. Combinations with alloys stabilised with Ti and especially Nb ought to be avoided, due to the possibility of embrittlement by Si-rich eutectics with these .

The minimal amount obtainable to purchase is shown in the “Pack Qty”. Sandvik 253 MA is often most popular as a substitute of stainless chromium which have insufficient creep strength and structural stability.

They have one other designated property with grade 2111HTR. 253MA Wire has the good amount of low nickel composition, which helps in reducing sulphide environment after we evaluate it to grade 310 and high- nickel alloy. They have the strong inclusion of nitrogen, silicon and cerium which makes metal a good oxide with great stability, glorious resistance, larger temperature power and rather more for sigma notion section.

253 ma welding rod

253 ma welding rod

  • 253 MA maintains its warmth resistant by superior control of micro alloy additions.
  • The use of uncommon earth metals together with silicon gives superior oxidation resistance up to 2000°F.
  • Stainless 253 MA is a lean austenitic heat resistant alloy with high strength and outstanding oxidation resistance.

Our stainless production range

AS 1554.6 pre-qualifies welding of 253MA with Grade 22.12HT rods or electrodes. Grade 309 fillers can be used if lower creep power can be tolerated.


All-positional MMA electrode with an acid rutile flux system on alloyed core wire. Controlled Si and rare earth (RE) additions (primarily cerium) provide glorious oxidation resistance. Recovery is about one hundred fifteen% with respect to core wire, sixty five% with respect to complete electrode.

Sandvik 253 MA is more resistant than the higher alloyed 25Cr/20Ni steels to combustion fuel assaults in cyclic conditions. It has an equivalent resistance, in comparison with the same grades, in situations which are virtually isothermal. Sandvik 253 MA may also be used in nitrogen-containing atmospheres provided that the fuel contains enough oxygen to form a protective oxide layer. In fuel shields containing little or no oxygen the resistance of Sandvik 253 MA is inferior to that of Alloy 800H and 25Cr/20Ni steels as illustrated in Fig.

Avesta Stainless Steel Welding Electrode Brands 253ma 3.2mm

Applications include furnaces and furnace components, excessive temperature flues, and heat recuperator systems, combustion nozzles. 253MA incorporates pretty low nickel content, which supplies it some benefit in lowering sulphide atmospheres when compared to high nickel alloys and to Grade 310. The inclusion of excessive silicon, nitrogen and cerium contents offers the steel good oxide stability, high elevated temperature power and excellent resistance to sigma part precipitation. Compared with conventional austenitic stainless steels, Sandvik 253 MA has good resistance to cyanide melts and neutral salt melts and in addition to metal melts, e.g. lead, at high temperatures.

We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.

Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean

253 ma welding rod
Tagged on: