en 10025-6 s890q high yield strength materials China Origin
Content
en 10025-6 s890q m2 tool steel yield strength China Origin
GANG STEEL supply en 10025-6 s890q high yield strength China Origin.Our Dimension range are 3-150mm*1000-3800mm*3000-18000mm .EN10025 6 S890Q plate, S890Q High Strength Steel, S890Q Q+T, S890Q UT S2E2 EN10025 6 S890Q plate, S890Q High Strength Steel, S890Q Q+T, S890Q UT S2E2. S890Q standard toughness, S890QL high toughness, and S890QL1 extra toughness. S890Q, according to EN 10025 6, with minimum impact values down to 20°C ( 4°F).
140 ksi metal plate & 960 MPa is a excessive-power, structural grade plate metal utilized in functions that require larger design energy. 140 ksi presents the next min-yield and tensile power , combined with good toughness, excellent weldability and formability. Structural steel plates of improved power and high energy make it attainable to manufacture extra confused steel constructions or lower the general metal consumption beneath the project by reducing the section size of members manufactured from high-power steel as compared with the standard materials with the same compression energy. These plates can be utilized instantly to the development pace with none delay. Good for prime stress industries We make no compromise with the standard of S890QL High Strength Steel Plates.
Gangsteel provide S890Q EN steel plates immediately from our mill within the aggressive price. The s890q metal plate equipped by us are accepted by purchasers in varied spheres of the industries ranging from primary industries such as Sugar, Paper, Textile, Dairy, Engineering to extra complicated such as Oil & Gas, Petrochemical, Chemical & Fertilizers, Power Generation and Nuclear Industries. Typical functions are demanding load bearing constructions.This kind of steel which is well over 3 times the energy of a fundamental S275 structural metal continues to be relatively simple to weld and fabricate.
ThyssenKrupp Steel Europe DoP-Nr.GBQ-0051-S890Q-TKSE-CPR / 6 Plate S890Q /1.8940 DECLARATION OF PERFORMANCE according to EU-REGULATION 305/2011,ANNEX IIIFatigue behaviour of structural steels with oxy-gas Mar 15,2016 S890Q metal in Europe#0183;This steel was equipped in a 15 mm thick steel plate. S890Q this is also a excessive strength metal in quenched and tempered conditions.In this case,the minimal yield stress is 890 MPa and it also presents a microstructure with bainite and tempered martensite.This steel was also supplied in a 15 mm thick steel plate.Fatigue behaviour of structural steels with oxy-gas Mar 15,2016 S890Q metal in Europe#0183;This steel was equipped in a 15 mm thick metal plate. S890Q that is also a excessive power steel in quenched and tempered situations.In this case,the minimal yield stress is 890 MPa and it also presents a microstructure with bainite and tempered martensite.This steel was also provided in a 15 mm thick steel plate. S890QL1, Steel Number 1.8925 is an additional excessive energy and toughness steel to EN . S890QL1 is a quenched and tempered, fine grained structural steel with minimal yield strength of 890MPa in its delivery situation, its mechanical properties are achieved by water quenching follow by tempering.
- European Steel and Alloy Grades / Numbers.en s690q steel specificationIn Europe the structural steel specification EN features a range of high power quenched and tempered steel grades and the designation S690QL gives the parameters for metal with a minimum yield strength of 690 MPa.Learn More.S690Q / 1.
- European Steel and Alloy Grades / Numbers.Some outcomes are eliminated in response to a discover of local legislation requirement.For extra info,please see right here.Previous123456Nexten s890q hsla metal – Steel factory – Carbon Steel EN S890Q,EN S890Q HALA metal plate – EN S890Q HSLA steel plate Location Join-win metal S890Q metal in Europegt; EN stainless steel S890Q steel in Europegt; EN S890Q high power low alloy metal plates are mainly made mechanical device and different structural components and so forth drilling machine,energy shovel,electrical energy drive wheel counter- mine trolley,mineral product vehicle,automobile loader.
- In Europe the structural metal specification EN features a range of high power quenched and tempered steel grades and the designation S690QL gives the parameters for metal with a minimal yield strength of 690 MPa.Learn More.S690Q / 1.
- As some of the professional s890q metal plate manufacturers and suppliers in China, we’re featured by quality merchandise and good service.
- BBNSTEEL provide EN metal grade specification is a excessive yield strength structural steels within the quenched and tempered situation steel plate grade in S500QL,S500QL1,S460Q,S460QL,S460QL1,S620QL1,S550Q,S550QL,S550QL1,S500Q,S890QL1,S960Q,S960QL,S620Q,S620QL,S690Q,S690QL,S690QL1,S890Q and S890QL steel plate grade.Some outcomes are eliminated in response to a notice of local law requirement.For more data,please see right here.Sell S500QL,S500QL1,S460Q,S460QL,S460QL1,,steel plate EN steel grade specification is a high yield power structural steels in the quenched and tempered situation metal plate grade in S500QL,S500QL1,S460Q,S460QL,S460QL1,S620QL1,S550Q,S550QL,S550QL1,S500Q,S890QL1,S960Q,S960QL,S620Q,S620QL,S690Q,S690QL,S690QL1,S890Q and S890QL steel plate grade.
s890q equivalent
The elasticity provided by this metal grades assist the architects to make aesthetic structures which have excellent strength and hardness. All these characteristics of the S890QL High Strength Steel Plates make it a widely demandable product in industry.
EN S890Q Chemical composition MS steel plate. EN S890Q Chemical composition, China steel offer MS steel plate, shipbuilding steel, variety of steel plates are now being produced and marketed in addition to ordinary carbon steel plates. These include high tensile strength steel plates with
EN10025-6 S890Q quenched and tempered steel plate Chemical composition
| Grade |
C % |
Si % |
Mn % |
P % |
S % |
N % |
B % |
|
Cr % |
|
S890Q |
0.200 |
0.800 |
1.700 |
0.025 |
0.015 |
0.015 |
0.005 |
|
1.500 |
|
Cu % |
Mo % |
Nb % |
Ni % |
Ti % |
V % |
Zr % |
|
|
|
|
0.500 |
0.700 |
0.060 |
2.000 |
0.050 |
0.120 |
0.150 |
|
|
|
S890Q Steel Chemical composition, Metal Properties
This page cover the S890Q steel grades Mechanical Properties, Chemical Element, Cross Reference of Euro norm EN 10137 2:1996 EN S890Q Materials, Application Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels,
EN10025-6 S890Q quenched and tempered steel plate mechanical properties
|
Grade |
Thickness(mm) |
Min Yield (Mpa) |
Tensile(MPa) |
Elongation (%) |
Min Impact Energy |
|
|
S890Q |
8mm-50mm |
Min 890Mpa |
940-1100Mpa |
11% |
-20 |
Min 30J |
|
|
51mm-100mm |
Min 830Mpa |
880-1100Mpa |
11% |
-20 |
Min 30J |
|
|
101mm-150mm |
Min 800Mpa |
820-1000Mpa |
11% |
-20 |
Min 30J |
EN10025 6 S890Q plate, S890Q High Strength Steel, S890Q
EN10025 6 S890Q plate, S890Q High Strength Steel, S890Q Q+T, S890Q UT S2E2 EN10025 6 S890Q plate, S890Q High Strength Steel, S890Q Q+T, S890Q UT S2E2 . S890Q standard toughness, S890QL high toughness and S890QL1 extra toughness. S890Q according to EN 10025 6 with minimum impact values down to 20°C ( 4°F)
EN 10025-6 S890Q Production Size:
Thickness: 4mm- 400mm; Width: 1000mm- 4000mm; Length: 4000mm- 12000mm.
Production ability:10000 Tons Per Month.
Production Way: Hot Rolled, Quenched(Q).
EN10025-6 S890Q Techanical Details:
Heat Treatment: Normalized, Quenched, Tempered, HIC, Impact Test,( Optional if not provided in rules)
Chemical Composition(%):
| Grade/ Material |
Element |
Composition(Max-A, Min-I) |
|
DIN EN10025-6 S890Q |
C |
A:0.20 |
|
Mn |
A:1.70 |
|
|
Si |
A:0.80 |
|
|
P |
A:0.025 |
|
|
S |
A:0.015 |
Mechanical Properties(Mpa)
| Grade/ Material |
Tensile Test |
MPa |
|
DIN EN 10025-6 S890Q |
Tensile Strength |
940-1100 |
|
Yield Strength |
I:890 |
|
|
Elongation |
I:11% |
|
|
Impact Test( if any) |
-20℃ |
Product Information
Product Information
Sell S890Q, S890Q1, S890Q1 steel plate, EN 10025-6
EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.
1.Grade:
S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.
2. Specification:
Thickness: 8mm to 300mm
Width: 1500mm to 4200mm
Length: 4000mm to 18000mm
3. Adopt Standard: EN10025-6 2004
4. Heat Treatment: Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technology, etc.
5. Delivery Time: 30-40days
6. Payment Item: 30% TT, or LC and TT.
7..Trade Terms: FOB, CFR, CIF
8. Steel Services: Cutting, Painting, Pretreatment, and The third party inspection in DNV, BV, LR, ABS, SGS ,etc and others in super thick ship steel plate.
Gangsteel is specialized in super thick low alloy, high strength steel plate and cooperated with ABS, BV, DNV, CCS, GL, LR, KR, NK, and RINA Classification Society to approve the super thickness plate to 300mm now.
If you have any inquiry in steel price or technical conditions, please contact us freely.
EN10025-6 S890Q steel is a kind of high yield strength quenched and Tempered structural steel material. The delivery condition for S890Q must be Q+T (quenched and Tempered ). S890Q steel plates also have a -20 degree low-temperature impact test. Material No. Of S890Q is 1.8940.
EN10025-6 S890Q high strength steel application: S890Q steel plate used in the manufacture of various types of construction machinery, such as mining and construction of various types of drilling rigs, shovels, electric wheel dump trucks, mining vehicles, excavators, loaders, bulldozers, all kinds of cranes, coal mine hydraulic support and other machinery Equipment and other structural parts.
The study aimed toward figuring out the potential advantages of utilizing high strength steel, compared to standard metal, by way of weight, material value EN10025-6 S890Q supplier and environmental impact. The optimization routine followed what is printed in the Eurocode and glad both ultimate and serviceability limit state circumstances, with exception of fatigue.
Gnee steel are particular field of exporting EN S890Q quenched and tempered metal plate on base of huge relation with our HBIS Wuyang mill in China. Gnee metal supply S890Q EN steel plates immediately from our mill in the competitive value.
These alloy booster the humungous vigour and maximizing the revenue to the purchasers. It can endure excessive influence collisions and stand up to any antagonistic environments. This basic steel plate guarantees 890 Mpa yield strength which meets the EN10025 grade requirements.
Henan HZZ provides a large selection of top of the range DIN17102 TStE420 carbon and low alloy high energy metal plate with scorching rolled. Having been centered on varied metal products for over 20 years, we now brings prospects high quality products with excessive precision and high energy. Metal Ore is among the best sellers who provides S890QL High Strength Steel Plates.
S690QL A excessive energy structural steel supplied in quenched and tempered situation. The steel is designed to provide excellent welding and bending properties and it offers substantial possibilities for savings in materials prices, processing and handing.
ST52 three, DIN17100 ST52 3, ST52 three Steel Plate, ST52 three metal manufacturing unit ST52 three, DIN17100 ST52 three, ST52 three Steel Plate, ST52 three steel manufacturing unit . Unitedsteel Carbon Plate Factory are specialised in producing and exporting Low alloy and high power metal plate, heavy plate and broad, heavy plate, Which is a big metal plate supplier mill at Unitedsteel Group. General necessities for arc welding of the steels specified shall be as given in EN . S890Q could possibly be used in Mechanical Engineering suspension arm and others components in machine.
EN10025-6 S890ql1 Steel Plate manufacturers in China |EN 10025 6. An ISO 9001:2008 certified company, gang steel Steel is an S890Q Steel Plate stockholder in China & across the world. Our focus is on providing customers with high-end steels that are not rolled or stocked locally. S890QL1 has the steel number 1.8988 according to EN10025 6 and is available on an ex-stock basis in thicknesses from 6 mm to 250 mm. gang steel offers an S890QL1 is a high strength steel plate. If you have any requirements, please contact us by email.