en10025-6 S500QL 1.8909 steelres

en10025-6 S500QL 1.8909 benjamin steel

Gangsteel supply high-strength structural steel plates en10025-6 S500QL,1.8909 steel plates in quenched and tempered heat treatment. S500QL usually called high-strength plates and en10025-6 S500QL are widely used in construction machinery and mining machinery. S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered.

However, water quenching of a formed work piece or element will often be less effective than the unique quenching within the plate mill in order that the fabricator might not have the ability to re-establish the properties required and subsequently hot forming will not be appropriate. In this respect, we recommend you to contact the steel producer prior to ordering in all cases where scorching forming is required. For bigger chilly forming quantities or if prescribed by laws, a brand new quenching and tempering heat remedy could also be needed to restore the original mechanical properties.

• Gangsteel is specialised in large thick low alloy, excessive strength metal plate and cooperated with ABS, BV, DNV, CCS, GL, LR, KR, NK, and RINA Classification Society to approve the tremendous thickness plate to 300mm now.
• EN S550QL1 High yield energy steel plate owned the minimum yield strength at 550 Mpa and tensile strength inside Mpa.The needed technical requirement when rolling steel plate S550QL1 contains quenching and tempering heat therapy,low temperature impacting check underneath minus 60 centigrade.EN S550QL1 Steel Plate are used in Construction of Bridges,HighwayEN GRADE S690QL Boiler Steel Plates Trio SteelTriosteel has a wide range of S690QL Steel Plate manufacturers in Mumbai.Our focus is on offering customers with excessive-end steels that aren’t rolled.Triosteel provides you with fantastic-grained quenched S690QL plates and tempered steel plate notable for its high power.EQUIVALENT GRADE OF EN GRADE S690QL BOILER PLATESDillimax S1100QL High Yield Steel Plate manufacturers in Combustible industries utilise EN S1100QL Structural Steel Plates that guarantee most security and pressure holding mechanisms.Dealer Distributors Of Below Manufacturers In India JSW Steel Ltd.POSCO.Salzgitter AG .Nippon Steel Sumitomo Metal.APERAM.Essar Steel.SSAB.
• S500QL is a high energy quenched and tempered, fine grained structural metal with a minimal yield strength of 500 MPa in its supply situation .
• Steel Plate EN Grade S460Q S460QL1 S460QL .Steel Plate EN Grade S460Q S460QL1 S460QL S500QL S500Q S550Q EN S550QL1 EN S690Q EN S890Q in Large Stock.Mechanical and chemical properties of EN S460Q Chemical composition % MAX C Si Mn P S B Cr Cu Mo Nb Ni Ti 0.22.Read Moreen s690ql1 light steel – JC STEEL PLATEEN Steel Plate mill – transformerforums.three hours up to now EN Steel Plate mill EN S500QL Carbon and Low-alloy High-power Steel Plate A572Gr70,A514GrF,A588GRA,A588GRB,S460Q,S690QL1,More Details,Kindly Check The Table As Follows.en s690ql1 mild steel – JC STEEL PLATEEN Steel Plate mill – transformerforums.three hours in the past EN Steel Plate mill EN S500QL Carbon and Low-alloy High-power Steel Plate A572Gr70,A514GrF,A588GRA,A588GRB,S460Q,S690QL1,More Details,Kindly Check The Table As Follows.
• We are engaged in producing and promoting stainless-steel, wear resistant steel plate, weathering steel plate, excessive strength carbon steel plate, alloy metal, boiler and Pressure vessel metal plate, we aslo produce steel pipes, coils and so on.
• Its mechanical properties are achieved by water quenching adopted by tempering.

S690Q

en10025-6 S500QL 1.8909 steel types

S500QL – based on EN with minimum influence values down to -40°C (-forty°F) S500QL1- based on EN with minimum impact values right down to -60°C (-76°F) Unitedsteel Mill Supply High energy steel plate, and have various stock dimension, If you require excessive energy metal plate.EN S500QL1

en10025-6 S500QL 1.8909 steel supplies near me

3. The chemical composition and mechanical properties of S500QL,1.8909 steel plates steel plates:
Carbon C: ≤0.20 Silicon Si: ≤0.80
Manganese Mn: ≤1.70 Nitrogen N: ≤0.015
Boron B: ≤0.0050 Chromium Cr: ≤1.50
Copper Cu: 0.50 Molybdenum Mo: 0.70
Niobium Nb: 0.06 Nickel Ni: ≤2.0
Titanium Ti: ≤0.05 Vanadium V: ≤0.12
Zirconium Zr: ≤0.15 S: ≤0.025
Phosphorus P: ≤0.015
PS: The specific chemical composition should be indicated in the steel plant material book.

2. en10025-6 S500QL,1.8909 are: S500Q, S500QL, S500QL1��Two, S500Q, S500QL, S500QL1 chemical composition: The quality of S500Q is divided into three level

Tensile and impression exams will be carried out in accordance with EN once per warmth and forty t. Improved deformation properties perpendicular to the product surface in accordance with EN or corresponding standards may be agreed by order. One individual value could also be under the minimum common worth specified, supplied that it isn’t lower than 70 % of that worth.

What is EN 10025-6 S500QL Equal Grade.

Equivalent steel grade of S500QL CHINA Grade Q500E
Europe	Germany	France	Sweden
FeE 500 V KT	TStE 500 V	E 500T	2615

S500Q and S500QL steel plates are German standard high-strength structural steels, usually called high-strength plates, equivalent to the national standard Q500D,
It is widely used in construction machinery and mining machinery.
S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered. S500Q series are: S500Q, S500QL, S500QL1.Second, S500Q chemical composition: The quality of S500Q is divided into three levels

What is EN 10025-6 S500Q mechanical properties?
EN10025-6 S500Q quenched and tempered steel plate mechanical properties

Grade	Thickness	Min Yield (Mpa)	Tensile (MPa)	Elongation (%)	Min Impact Energy
EN10025-6 S500QL	8mm-50mm	Min 500Mpa	590-770Mpa	17%	-40	Min 30J
	51mm-100mm	Min 480Mpa	590-770Mpa	17%	-40	Min 30J
	101mm-150mm	Min 440Mpa	540-720Mpa	17%	-40	Min 30J

 

What is application of EN10025-6 S500QL?
Used in buildings, bridges, ships, vehicles, pressure vessels and other structures, the carbon content (melting analysis) is generally not more than 0.20%, the total content of alloying elements is generally not more than 2.5%, the yield strength is not less than 295MPa, and it has good impact toughness
And low alloy steel with welding function.

What is EN 10025-6 S500QL chemical?
EN10025-6 S500QL quenched and tempered steel plate Chemical composition

Grade	C %	Si %	Mn %	P %	S %	N %	B %	Cr %
EN 10025-6 S500QL	0.200	0.800	1.700	0.020	0.010	0.015	0.005	1.500
	Cu %	Mo %	Nb %	Ni %	Ti %	V %	Zr %
	0.500	0.700	0.060	2.000	0.050	0.120	0.150

Depending on the product thickness and manufacturing conditions, the manufacturer can add one or several alloying elements to the steel to increase the maximum value in order to obtain the specified properties (see 7.2.2).
At least 0.015% of grain refinement elements should be present. Aluminum is one of these elements.
The minimum content of soluble aluminum is 0.015%. If the aluminum content reaches the minimum of 0.018%, the value is considered to be reached.

It has the traits of excessive yield and more strengthening alloy components. In order to make sure that the tensile strength of the weld metallic fulfils the necessities of the base metal, the warmth enter and interpass temperature have to be limited throughout welding. Experience has shown that the welding situations ought to be chosen so that the cooling time t8/5 does not exceed 20 seconds. This is relevant when using suitable filler materials of a corresponding yield energy class. S355J2WP metal is a sizzling rolled structural metal with anti-corrosion characteristic, also referred to as weathering steel and ambiance corrosion resistance steel, under commonplace EN . If you have any requirement for stainless plate in competitive worth and quicker delivery time, please contact us.

en10025-6 S500QL 1.8909 steel suppliers near me
en10025-6 S500QL 1.8909 tube steel
en10025-6 S500QL 1.8909 metal steel
en10025-6 S500QL 1.8909 steel supplier
en10025-6 S500QL 1.8909 steel company
en10025-6 S500QL 1.8909 mild steel
en10025-6 S500QL 1.8909 steel sales
en10025-6 S500QL 1.8909 united states steel
en10025-6 S500QL 1.8909 tubular steel
en10025-6 S500QL 1.8909 free steel
en10025-6 S500QL 1.8909 steel supplies
en10025-6 S500QL 1.8909 steel manufacturers
en10025-6 S500QL 1.8909 honing steel
en10025-6 S500QL 1.8909 metalsdepot
en10025-6 S500QL 1.8909 steels
en10025-6 S500QL 1.8909 ussteel
en10025-6 S500QL 1.8909 steel shop
en10025-6 S500QL 1.8909 steel tube sizes
en10025-6 S500QL 1.8909 steel products
en10025-6 S500QL 1.8909 steel material
en10025-6 S500QL 1.8909 steelrs
en10025-6 S500QL 1.8909 steel tubes
en10025-6 S500QL 1.8909 steelers wheel

S355 structural grade carries minimum yield power of 355 N/mm²m, the JR designation confirms that the hyperlink for you metal has undergone longitudinal Chary V-Notch influence testing at 27J at room temperature. 1.8904 S550Q 1.8906 S460QL 1.8908 S460Q 1.8909 S500QL 1.8914 S620Q 1.8916 S460QL1 1.8924 The contents from this Steel Alloy Database is probably not reproduced.EN S690QL Brown McFarlaneFabrication of EN S690QL Steel Plate.High power quenched and tempered metal plate could also be simply welded and fabricated nevertheless its high yield energy and tensile strength in contrast with delicate metal implies that it ought to be treated with some warning.We have supplied data which is supposed as a main guide to various fabrication methods. DIN EN S690QL Non- Alloy Structural Steel Plate BBNSTEEL Steel can provide DIN EN S690QL Structural Carbon Steel Plate,mainly utilized in building in the fields requiring carbon steel plates with kinds of impact exams and power.DIN EN S690QL Non- Alloy Structural Steel PlateDIN EN S690QL Non- Alloy Structural Steel Plate BBNSTEEL Steel can supply DIN EN S690QL Structural Carbon Steel Plate,primarily utilized in construction in the fields requiring carbon metal plates with kinds of impact exams and strength.DIN EN S620QL Non- Alloy Structural Steel PlateDIN EN S620QL Non- Alloy Structural Steel Plate BBNSTEEL Steel can supply DIN EN S620QL Structural Carbon Steel Plate,primarily used in construction within the fields requiring carbon steel plates with sorts of impact checks and power. PILAC Steel for Building Structure HSB Steel for Bridge Structure Additional Guaranteed Quality EN10025 Structural Steel Steel Plate for Mechanical Structure Abrasion-Resistant Steel High Strength Steel for Welded Structure TMCP Steel.List of Mechanical Test Marking.Mill Test Certificate Available Dimensions.Global Sales Network 4 STEEL PLATES – POSCOPILAC Steel for Building Structure HSB Steel for Bridge Structure Additional Guaranteed Quality EN10025 Structural Steel Steel Plate for Mechanical Structure Abrasion-Resistant Steel High Strength Steel for Welded Structure TMCP Steel.List of Mechanical Test Marking.Mill Test Certificate Available Dimensions.Global Sales Network four S690QL Plate Manufacturer from Mumbai – Alloy Steel Plates NEXTGEN STEEL ALLOYS is the biggest Stockholder for S690QL HIGH YIELD STEEL PLATE in all Thickness Range.We have a large stock of high yield steel plates for engineering functions.The high yield plates are S690QL and S690QL1 to EN with extra stocks with yields at S890QL,S960QL and S1100QL. S550Q steel plate is a hydroelectric steel plate, which is a low-alloy high-strength steel plate.