EN 10025-6 S620Q-strength metric class 10.9 steel hex head screws
Gangsteel produce and supply materials of EN10025-6 S620q steel plate and equal grade S590Q, S690Q, S690QL, S690QL1, WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E S620q steel plate Executive standard: EN10025-6, GB/T16270-2009.
EN10025-6 S620q Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 degree .
Chemical composition of steel S620Q (1.8914), Standards of steel S620Q (1.8914) and Mechanical Properties of steel S620Q (1.8914) Equivalent grades of steel S620Q (1.8914)
about the steel S620Q (1.8914) Tensile Strength, Elongation, Proof strength , Hardness, please see our table.
Thermal
The metal shows a by 15% larger resistance to mineral wear as a result of sliding action compared to S235J2. Products within the delivery condition +N could also be scorching fashioned and/or normalized after supply.
Automated Compression, Tensile, And Flexure Testing: At2 Automated Xy Stage
Such as S235JRG2 chemical composition, S235JRG2 properties,S235JRG2 yield strength, S235JRG2 tensile power, S235JRG2 equivalent grades, and so on. Meanwhile, we additionally do procesing for S235JRG2, together with cutting, bending, welding, drilling, and so forth. EN S620QL1 is either out there as exstock or instantly shipped from the mill to our prospects all through the globe. Alibaba s690q metallic gentle steel provides 219 s690q metal plate products.
- These steels are very adaptable and can be utilized in areas requiring most power or construction but much less weight.
- This impact is clear in the material requirements, which tend to specify reducing ranges of yield strength with increasing materials thickness.
- Structural steels are highly sought after as they provide a unique mixture of excellent welding properties with excessive strengths.
- Structural metal is on the market in lots of grades but is usually offered by manufacturers in a pre-formed state with a defined cross-sectional form specifically for certain functions.
- Today the market has a variety of structural steels corresponding to offshore steels, wear resistant grades, high-strength steels, boiler and strain vessel steels, and shipbuilding grades.
- Structural steels can be used in a number of methods and their applications are very diverse.
Tensile strength refers to the maximum load that does not break the steel. Continuing with the S235 example, this worth is someplace between 360…510 MPa. While it’s noticeably higher than yield strength, you need to contemplate the yield energy value when choosing the proper material in your circumstances. This is because exceeding tensile energy means failure, while exceeding yield energy solely ends in a deformation. S355 is a non-alloy European standard (EN ) structural steel, most commonly used after S235 where extra power is required. It obtained great weldability and machinability, allow us to see more mechanical particulars of this metal. However, welding involves locally melting the metal, which subsequently cools.
Structural steel 460 is a specially designed steel to be used in harsh environments such as offshore constructions. Some variations of S460 structural steel plate include S460G1+Q, S460G1+M, S460G2+Q , and S460G2+M. Each structural metal grade has the prefix “S” and is adopted by suffixes that denote difference within the particular requirement for that structural application.
J indicates that it can take a hit with a maximum vitality of 27 Joules, K 40 Joules and L 60 Joules. R signifies that the minimal temperature for that capacity is at room temperature (20°C), 0 means 0°C and 2 means -20°C. Therefore, S235JR can solely take a blow of 27 Joules at room temperature, while S235L2 can take 60 Joules at -20°C. It is all properly illustrated within the video under about the Charpy impact check. In case of harsher situations, stainless steels are used instead, mostly AISI 304 or AISI 316. The primary mechanical properties are elasticity, plasticity, stiffness, growing older sensitivity, power, hardness, impression toughness, fatigue power and fracture toughness. We join engineers, product designers and procurement groups with the best supplies and suppliers for their job.
Equivalent grades of steel S620Q (1.8914)Equivalent grades of steel S620Q (1.8914)Heat treatment conditions+A Soft annealed+AC Annealed to achieve spheroidization of the carbides+AR As rolled+AT Solution annealed+C Cold drawn / hard+CR Cold rolled+FP Treated to ferrite-pearlite structure and hardness range+I Isothermal annealing+LC Cold drawn / soft+M Thermo mechanical rolling+N Normalized+NT Normalized and tempered+P Precipitation hardened+PE Peeled+QA Air quenched and tempered+QL Liquid quenched and tempered+QT Quenched and tempered+S Treated to improve shearability+SH As rolled and turned+SR Cold drawn and stress relieved+T Tempered+TH Treated to hardness range+WW Warm worked+U Untreated
7. Obtained German TUV certification.
S620Q steel plate uses: used to manufacture low-temperature resistant, high-strength key components, construction machinery, mining machinery structures, etc. It is a high-strength structural steel plate.
European elevation strength alloy steel plate: S460Q, S460QL, S460QL1, S500Q, S500QL, S500QL1, S550Q, S550QL, S550QL1, S590Q, S620Q, S620QL, S620QL1, S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QQL, S960QQL1,
WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E, etc.;
- What is EN 10025-6 S620Q steel plat?
EN10025-6 S620Q steel plate is EN 1.8914, Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 ° C. The main adopt standard are EN 10025-6: 2004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 10137-2: 1996 S620Q Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels
- What is EN 10025-6 S620Q OR 1.8914 Chemical composition % of steel EN 10025-6 S620Q (1.8914): EN 10025-6-2004
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
V |
N |
Nb |
Ti |
Cu |
Zr |
B |
CEV |
max 0.2 |
max 0.8 |
max 1.7 |
max 2 |
max 0.025 |
max 0.015 |
max 1.5 |
max 0.7 |
max 0.12 |
max 0.015 |
max 0.06 |
max 0.05 |
max 0.5 |
max 0.15 |
max 0.005 |
max 0.83 |
- What is Mechanical properties of steel EN 10025-6 S620Q (1.8914)?
Nominal thickness (mm): |
3 – 100 |
100 – 150 |
Rm – Tensile strength (MPa) |
700-890 |
650-830 |
- What is Equivalent grades of steel EN10025-6 S620Q (1.8914)
EU |
Germany |
France |
European old |
|||
S620Q |
|
|
|
EN10025-6 EQUAL Grade stock list in China warehouse |
|||||||
|
Grade |
size mm |
Thick mm |
Wide mm |
Long mm |
Tons |
Quantity |
High-strength structural stee plate |
BS960E |
7*1600*11300 |
7 |
1600 |
11300 |
2.023 |
2 |
|
Q550CFD |
16*2500*12000 |
16 |
2500 |
12000 |
3.768 |
1 |
|
Q550CFD |
16*2500*12000 |
16 |
2500 |
12000 |
3.768 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q690CFD |
30*2550*10640 |
30 |
2550 |
10640 |
6.39 |
1 |
|
SC960E |
30*1550*5800 |
30 |
1550 |
5800 |
2.117 |
1 |
|
NQB-S690QL |
20*1700*11000 |
20 |
1700 |
11000 |
2.936 |
1 |
|
BS700MCK2 |
8*1500*13000 |
8 |
1500 |
13000 |
1.227 |
1 |
|
BWELDY620QL6 |
12*2400*6220 |
12 |
2400 |
6220 |
1.406 |
1 |
|
BWELDY620QL6 |
12*2400*9000 |
12 |
2400 |
9000 |
2.035 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.239 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
5.181 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
1.884 |
4 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
2.12 |
1 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
0.707 |
1 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
0.706 |
1 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
2 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
1 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
1 |
|
BS700MCK2 |
12*1500*13000 |
12 |
1500 |
13000 |
1.837 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
1.696 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
4.522 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
4.522 |
1 |
This susceptibility may be expressed as the ‘Carbon Equivalent Value’ , and the varied product requirements for carbon steels normal give expressions for determining this worth. PD accommodates helpful look-up tables and steering on choice of an appropriate sub-grade is given in ED007. Steel derives its mechanical properties from a combination of chemical composition, heat treatment and manufacturing processes. While the major constituent of steel is iron, the addition of very small quantities of other parts can have a marked impact upon the properties of the steel.
A handy measure of toughness is the Charpy V-notch impact test – see image on the best. This check measures the impact vitality required to interrupt EN10025-6 S620Q steel plate supplier a small notched specimen, at a specified temperature, by a single influence blow from a pendulum. The strengths of generally used structural stainless steels range from one hundred seventy to 450 N/mm².
They are likely to corrode easily, so powder coating is commonly used, irrespective of a machine’s environment – inside or outside. For an enduring coating, the metal surface ought to be pretreated and cleaned beforehand. Pitting corrosion can happen when chrome steel alloys, similar to grade 304 chrome steel, come into contact with salt-rich sea breezes and seawater. Chloride resistant metals, like grade 16 stainless steel, are necessary to utilize for naval purposes or something involved with chloride. In the experimental analysis, submit-welding microstructure and micro-hardness exams carried out for the butt joints confirmed the existence of a gentle layer inside the heat-affected zone.
Structural steels have an S as a prefix, standing for… structural steels. There is quite a lot of alternate options – for example P for pressure vessel steels – meant for various purposes. The properties table reveals that growing grades mean greater strength. S235 and S355 steels are the most popular among those offered here, as they cowl most needs. S420 is appropriate when on the lookout for larger strength but may not be readily available with every manufacturer. Structural steels are essentially the most broadly used amongst steels due to their sufficient qualities and comparatively low price. Every 12 months, about 25% of structural steels are used in the construction of buildings.
In European Standards for structural carbon steels , the first designation pertains to the yield strength, e.g. S355 metal is a structural steel with a specified minimum yield strength of 355 N/mm². S355 structural grade carries minimum yield strength of 355 N/mm²m, the JR designation confirms that the hyperlink for you steel has undergone longitudinal Chary V-Notch impact testing at 27J at room temperature. These typical strengths for annealed material are outlined in Table 2.