EN 10025-6 S620Q strength steel is used in prestressed concrete
EN 10025-6 S620Q strength steel for automotive applications
Gangsteel produce and supply materials of EN10025-6 S620q steel plate and equal grade S590Q, S690Q, S690QL, S690QL1, WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E S620q steel plate Executive standard: EN10025-6, GB/T16270-2009.
EN10025-6 S620q Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 degree .
Chemical composition of steel S620Q (1.8914), Standards of steel S620Q (1.8914) and Mechanical Properties of steel S620Q (1.8914) Equivalent grades of steel S620Q (1.8914)
about the steel S620Q (1.8914) Tensile Strength, Elongation, Proof strength , Hardness, please see our table.
7. Obtained German TUV certification.
S620Q steel plate uses: used to manufacture low-temperature resistant, high-strength key components, construction machinery, mining machinery structures, etc. It is a high-strength structural steel plate.
European elevation strength alloy steel plate: S460Q, S460QL, S460QL1, S500Q, S500QL, S500QL1, S550Q, S550QL, S550QL1, S590Q, S620Q, S620QL, S620QL1, S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QQL, S960QQL1,
WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E, etc.;
Metallurgical properties are investigated by means of optical and scanning electron microscope. The hardness traverse throughout weld zone reveals HV , about 18% improve within the tensile energy and really low toughness of weld joint as compared with father or mom metal. The major position of that circumstances is related with automotive physique materials, welding know-how, state of stress and temperature.
S690QL Structural Steel plates, also referred to as DILLIMAX 690 and DILLIMAX 690E supplies goof welding abilities, in all present welding strategies. With their high formability traits, they are often bent, welded and reduce into various styles and sizes.
S355 structural grade carries minimal yield energy of 355 N/mm²m, the JR designation confirms that the link for you steel has undergone longitudinal Chary V-Notch influence testing at 27J at room temperature. Gangsteel provide EN S690QL excessive strength, high yield, structural alloy quenched and tempered steel plate.
- Numerical analyses and experimental comparisons had been utilized utilizing three warmth enter values (10, 14, and 17 kJ/cm) to be able to predict the thermal fields throughout welding.
- Experimental analysis was carried out of the microstructure and microhardness habits in several HAZ areas.
- S620Q, S620QL, S620QL1 Plates have higher payload capacity and are power environment friendly, therefore can be used in leaner structures.
- EN S620Q is both obtainable as ex–inventory or instantly shipped from the mill to our clients throughout the globe.
EN10025-6 S620Q steel angle
Equivalent grades of steel S620Q (1.8914)Equivalent grades of steel S620Q (1.8914)Heat treatment conditions+A Soft annealed+AC Annealed to achieve spheroidization of the carbides+AR As rolled+AT Solution annealed+C Cold drawn / hard+CR Cold rolled+FP Treated to ferrite-pearlite structure and hardness range+I Isothermal annealing+LC Cold drawn / soft+M Thermo mechanical rolling+N Normalized+NT Normalized and tempered+P Precipitation hardened+PE Peeled+QA Air quenched and tempered+QL Liquid quenched and tempered+QT Quenched and tempered+S Treated to improve shearability+SH As rolled and turned+SR Cold drawn and stress relieved+T Tempered+TH Treated to hardness range+WW Warm worked+U Untreated
Standard EN is the Standard Specification Technical Delivery Conditions For Flat Products Of High Yield Strength Structural Steels In The Quenched And Tempered Condition. If you have any inquiry for metal materials in China market, please be at liberty to contact us.
This steel is used in different functions similar to heavy transportation, development business, machine developing, and lifting gear. Some of the names utilized in our website are commerce names and/or trademarks of particular producers. Supplies could be made to meet buyer specs from any of the out there supply. Trade names or Trademarks have been used solely for reference purpose and to help clients identify merchandise in keeping with listed specs.
The most alloying contents for prime power steels as given inside the requirements are generally thought of to offer very conservative larger limits. Furthermore, it should be taken into consideration that not solely the metallic grade has an affect on the alloying content material material – as well as the chemical composition might range with the thickness differ.
- What is EN 10025-6 S620Q steel plat?
EN10025-6 S620Q steel plate is EN 1.8914, Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 ° C. The main adopt standard are EN 10025-6: 2004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 10137-2: 1996 S620Q Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels
- What is EN 10025-6 S620Q OR 1.8914 Chemical composition % of steel EN 10025-6 S620Q (1.8914): EN 10025-6-2004
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
V |
N |
Nb |
Ti |
Cu |
Zr |
B |
CEV |
max 0.2 |
max 0.8 |
max 1.7 |
max 2 |
max 0.025 |
max 0.015 |
max 1.5 |
max 0.7 |
max 0.12 |
max 0.015 |
max 0.06 |
max 0.05 |
max 0.5 |
max 0.15 |
max 0.005 |
max 0.83 |
- What is Mechanical properties of steel EN 10025-6 S620Q (1.8914)?
Nominal thickness (mm): |
3 – 100 |
100 – 150 |
Rm – Tensile strength (MPa) |
700-890 |
650-830 |
- What is Equivalent grades of steel EN10025-6 S620Q (1.8914)
EU |
Germany |
France |
European old |
|||
S620Q |
|
|
|
EN10025-6 EQUAL Grade stock list in China warehouse |
|||||||
|
Grade |
size mm |
Thick mm |
Wide mm |
Long mm |
Tons |
Quantity |
High-strength structural stee plate |
BS960E |
7*1600*11300 |
7 |
1600 |
11300 |
2.023 |
2 |
|
Q550CFD |
16*2500*12000 |
16 |
2500 |
12000 |
3.768 |
1 |
|
Q550CFD |
16*2500*12000 |
16 |
2500 |
12000 |
3.768 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q690CFD |
30*2550*10640 |
30 |
2550 |
10640 |
6.39 |
1 |
|
SC960E |
30*1550*5800 |
30 |
1550 |
5800 |
2.117 |
1 |
|
NQB-S690QL |
20*1700*11000 |
20 |
1700 |
11000 |
2.936 |
1 |
|
BS700MCK2 |
8*1500*13000 |
8 |
1500 |
13000 |
1.227 |
1 |
|
BWELDY620QL6 |
12*2400*6220 |
12 |
2400 |
6220 |
1.406 |
1 |
|
BWELDY620QL6 |
12*2400*9000 |
12 |
2400 |
9000 |
2.035 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.239 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
5.181 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
1.884 |
4 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
2.12 |
1 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
0.707 |
1 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
0.706 |
1 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
2 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
1 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
1 |
|
BS700MCK2 |
12*1500*13000 |
12 |
1500 |
13000 |
1.837 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
1.696 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
4.522 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
4.522 |
1 |
EN 10025-6 S620Q strength steel hss
abs grade ah36 shipbuilding and offshore industries steel Has been dedicated to the of export steel business greater than 10 years. Our service involves all types of steel product , along with uncooked provides and processed completed merchandise. The PDA process also equipped the quantitative relationship between six cumulative plastic pressure parts and angular distortion of fillet welded T-joints. Based on the obtained outcomes an estimate was supplied EN10025-6 S620Q steel plate supplier regarding the weldability of S 960 QL metallic as well as the proposal for added analysis. The examine evaluates numerically and experimentally the impression of welding warmth enter parameters on the microstructure and hardness of the heat-affected zone of quenched and tempered and thermo-mechanically managed course of 690-MPa extreme-power steel.
EN metal grade specification is a extreme yield vitality structural steels inside the quenched and tempered condition metal plate grade in S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade. EN metal grade specification is a high yield strength structural steels within the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade. P690Q may be provided as metal plate/ sheet, spherical metallic bar, metal tube/pipe, metal stripe, metallic billet, metal ingot, metal wire rods. electroslag, cast ring/ block,and so forth.Plates of S690Q metallic grade – MetinvestS690Q structural extreme-power metal with minimal yield power of 690 MPa supplied in quenched and tempered scenario . Technical supply conditions for flat merchandise of high yield vitality structural steels inside the quenched and tempered state of affairs.EN Standard main metallic gradeS460Q, S460QL1, S460QL, S500QL, S500Q, S500QL1, S550Q, S550QL, S690Q, S690QL, S890Q, S890QL, S960QL and so forth. Gangsteel supply EN metal grade specification is a excessive yield power structural steels within the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.
Most present analysis of nano-indentation take a look at information assumes the pattern to behave as an isotropic, homogeneous physique. In practice, engineering materials comparable to structural steels, titanium alloys and excessive power aluminium alloys are multi-section metals with microstructural size scales that may be the same order of magnitude because the utmost achievable nano-indentation depth. Unitedsteel Carbon Plate Factory are specialized in producing and exporting Low alloy and extreme power metal plate, heavy plate and wide, heavy plate, Which is a big metal plate supplier mill at Unitedsteel Group. General necessities for arc welding of the steels specified shall be as given in EN . S890Q could possibly be utilized in Mechanical Engineering suspension arm and others parts in machine.
Both the experimental and numerical outcomes have confirmed that decrease of mecahanical properties occurs at approximately 450°C. We Export to Saudi Arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Japan, Australia, UAE, France, Azerbaijan, Ghana, Germany, Indonesia & Bahrain, Kazakhstan, Greece, Singapore, Thailand, Indonesia. With years of experience in manufacturing s690q steel plate we offer prime quality, decrease cost nonetheless probably the greatest service. as the welding warmth input enhance as a lot as 30.9kJ/cm, the adjustments of microstructure and influence toughness had been small. s690q steel carbon steel, Plates of S690Q steel grade MetinvestS690Q structural highstrength steel with minimal yield power of 690 MPa geared up in quenched and tempered state of affairs . Plates of S690 steel grade adjust to EN regular.S960Q metal plate -S355J2,S35J2G3,S355JR,S235JR Stock S960Q steel is extreme yield power structural steels inside the quenched and tempered supply state. The image S is for structural metallic, 960 for the minimum yield power in thickness beneath 50mm .