EN 10025-6 S550QL 1.8926 kawada high strength steel spring coil mattress
Content
Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate: Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤
150mm.
What is ABS grade A steel plate Has been committed to the of export steel trade more than 10 years. Our service includes all types of steel product , including uncooked materials and processed finished products. S355J2WP metal is a sizzling rolled structural steel with anti-corrosion characteristic, also known as weathering steel and ambiance corrosion resistance metal, under normal EN . ASTM A283 plate metal options low and intermediate tensile power carbon metal plate of structural high quality. If you have an interest in these features, please contact us. Gangsteel sincerely hope new and old clients might inquiry our steel plates. The normal includes solid steels for use in general engineering including machinery , automotive, armament , agriculture and so on.
EN S960QL metal plate has the lowest yield strength of EN S960QL metal plate and tensile power of 980 ~ 1150 MPa.In structural steel, EN S960QL metal plate is a type of steel with very excessive mechanical property index. In the following, material grades of hull structural steels are known as follows a) A, B, D, E and F denote normal energy steel grades. b) AH, DH, EH and FH denote high strength and further excessive energy steel grades, where ‘H’ indicates the material power. S355 steel is a European normal structural metal grade, according to EN , materials S355 is divided into four primary quality grades S355JR (1.0045), S355J0 (1.0553), S355J2 (1.0577) and; S355K2 (1.0596).
Steels equipped to this commonplace are suitable for hardening and in the quenched and tempered situation have good toughness at a given tensile power. These standards are the latest European requirements for structural steel. Is changing into more and more popular with engineers and designers trying to exploit its strength to weight ratio. Use of S890 steel will guarantee larger payloads for lifting and transportation equipment. These are products of various cross section shapes which are obtained after descaling, by drawing of sizzling rolled bar or rod on a draw bench.
- and S550QL1.The major distinction between these three grades shall be the impacting test temperature.S550Q .
- Development High strength constructional steel acc DIN EN High power constructional metal in tempered condition according to DIN EN .
- Under European normal EN10025 _ 6,at the 550 Mpa yield energy there are three metal grades S550Q,S550QL .
S550QL
EN 10025-6 S550QL 1.8926 high strength steel washers
Steel Name LR Grade EH46 Shipbuilding metal plate, LR Grade EH46 Ship steel plate, LR Grade EH46 Marine metal plate, LR Grade EH46 metal plate . Proof stress values at elevated temperatures are included and properties within the work hardened condition. The steels are designated in accordance with BS EN and the metal numbers are allocated in accordance with BS EN . The steels are named based on BS EN and numbered in accordance with BS EN . The metal numbers consist of 1 followed by a point and 4 figures. As an instance the steel numbers of the above-mentioned steels are 1,8836 and 1,4307. The steel numbers are allocated by a European Registering Office.
EN 10025-6 S550QL 1.8926 high strength steel wikipedia
This entails chilly deformation with out removing materials. This operation provides the product special options with respect to form, dimensional accuracy and floor finish. The standard applies to castings joined by weld only when the welding is done at the foundry and not when the castings are welded to wrought steels. BS EN Stainless Steels -Part three Technical supply situations for semi-finished products, bars, rods and sections for common functions.
What is different in EN10025-6 S550Q S550QL and S550QL1?
S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.
What is EN10025-6 S550QL Carbon Equivalent: CEV?
Thickness, mm |
Max CEV based on the ladle analysis |
5≤t≤50 |
0.65% |
50<t≤100 |
0.77% |
100<t≤150 |
0.83% |
What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions
EN10025-6 S550QL Mechanical Properties |
||||||
Grade |
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
Charpy V Notch Impact Test |
|
Degree |
Min Value |
|||||
S550QL |
mm |
Min Mpa |
Mpa |
Min % |
-40℃ |
J |
5≤t≤50 |
550 |
640-820 |
16% |
30 |
||
50<t≤100 |
530 |
640-820 |
30 |
|||
100<t≤150 |
490 |
590-770 |
30 |
|||
Note: Impact energy for impact test is on longitudinal |
EN10025-6 S550QL Chemical Composition |
|||||||
Grade |
The Element Max (%) |
||||||
C |
Si |
Mn |
P |
S |
N |
B |
|
S550QL |
0.22 |
0.86 |
1.80 |
0.025 |
0.012 |
0.016 |
0.006 |
Cr |
Cu |
Mo |
Nb |
Ni |
Ti |
V |
|
1.60 |
0.55 |
0.74 |
0.07 |
2.1 |
0.07 |
0.14 |
EN 10025-6 S550QL 1.8926 high strength steel stress strain curve
S550QL
AB/AH32 shipbuilding metal plate is a type of hot rolled high tensile power marine steel plate. LR EH36 steel, LR EH36 grade, LR EH36 plate, LR DH36 sheet, LR EH36 shipbuilding steel value,LR EH36 steel provider and manufacturer. LR EH36 steel is a type of excessive tensile power marine metal. All of these steels have been engineered to be optimal lengthy-lived shipbuilding steels.As with different grades of steel, they have a specific gravity of 7.8. Steel and metal is introduced, together with chemical composition and mechanical performance information, each steel grade property. The steel for shipbuilding and oil platform—EH40, is the high tensile energy metal. It is the Hull structural metal,with it is good toughness properties, higher energy,strong corrosion-resistance,the processing properties,and welding properties.This kind of metal can be utilized in the manufacture of the ocean ship’s hull construction whose weight is above tons.
Falls Twp. Holding Special Meeting On Proposed US Steel Site Redevelopment – LevittownNow.com
Falls Twp. Holding Special Meeting On Proposed US Steel Site Redevelopment.
Posted: Mon, 30 Nov 2020 17:33:56 GMT [source]
EN 10027-1 S550QL 1.8926 high strength steel plate
EN 10027-1 S550QL 1.8926 high strength steel chart
EN 10027-1 S550QL 1.8926 high strength steel sheet
EN 10027-1 S550QL 1.8926 high strength steel for sale
EN 10027-1 S550QL 1.8926 high strength low alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel sheet metal
EN 10027-1 S550QL 1.8926 high strength carbon steel plate
EN 10027-1 S550QL 1.8926 plate slenderness limits for high strength steel sections
EN 10027-1 S550QL 1.8926 what is high strength steel plate
EN 10027-1 S550QL 1.8926 a high strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plates
EN 10027-1 S550QL 1.8926 high strength stainless steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate australia
EN 10027-1 S550QL 1.8926 high strength weldable steel plate
EN 10027-1 S550QL 1.8926 ultra high strength steel plate
EN 10027-1 S550QL 1.8926 high yield strength steel plate
EN 10027-1 S550QL 1.8926 high strength alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate canada
EN 10025-6 S550QL 1.8926 high strength rail steel
Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.