EN10025-6 s500q steel equivalent
Content
We supply and export EN 10025-6 steel plate S500Q 1.8924. EN10025-6 S500Q and 1.8924 cutting parts which specification is a high yield strength structural steels in the quenched and tempered. The condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel grade.
EN 10025-6 S500Q steel flat steel
write or name acquire for our high offer. We’ll trade or swap tools too. Write for bulletin.
What is EN 10025-6 S500Q chemical?
EN10025-6 S500Q quenched and tempered steel plate Chemical composition
Grade |
C % |
Si % |
Mn % |
P % |
S % |
N % |
B % |
Cr % |
S500Q |
0.200 |
0.800 |
1.700 |
0.025 |
0.015 |
0.015 |
0.005 |
1.500 |
|
Cu % |
Mo % |
Nb % |
Ni % |
Ti % |
V % |
Zr % |
|
|
0.500 |
0.700 |
0.060 |
2.000 |
0.050 |
0.120 |
0.150 |
|
What is EN 10025-6 S500Q Equal Grade.
S500Q and S500QL steel plates are German standard high-strength structural steels, usually called high-strength plates, equivalent to the national standard Q500D,
It is widely used in construction machinery and mining machinery.
S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered. S500Q series are: S500Q, S500QL, S500QL1.Second, S500Q chemical composition: The quality of S500Q is divided into three levels
What is application of EN10025-6 S500Q?
Used in buildings, bridges, ships, vehicles, pressure vessels and other structures, the carbon content (melting analysis) is generally not more than 0.20%, the total content of alloying elements is generally not more than 2.5%, the yield strength is not less than 295MPa, and it has good impact toughness
And low alloy steel with welding function.
What is EN 10025-6 S500Q mechanical properties?
EN10025-6 S500Q quenched and tempered steel plate mechanical properties
Grade |
Thickness |
Min Yield (Mpa) |
Tensile (MPa) |
Elongation (%) |
Min Impact Energy |
|
S500Q |
8mm-50mm |
Min 500Mpa |
590-770Mpa |
17% |
-20 |
Min 27J |
|
51mm-100mm |
Min 480Mpa |
590-770Mpa |
17% |
-20 |
Min 27J |
|
101mm-150mm |
Min 440Mpa |
540-720Mpa |
17% |
-20 |
Min 27J |
.00 – 9.001610The minimum width is 900 mm. widthFrom – up toS650MC2.00 – 2. .001960The minimum width is 900 mm. widthFrom – up toS550MC1.70 – 1.809201.eighty – 1. .60 – 8.002070The minimal width is 900 mm.
.101600The minimum width is 900 mm. widthFrom – up toS500MC1.eighty – 1. .002070The minimal width is 900 mm. widthFrom – up toS460MC1.70 – 1. widthFrom – up toS420MC1.53 – 1.579501.57 – 1.
widthFrom – up toS355JRS355J0S355J2S355K21.fifty seven – 1. widthFrom – up toXF4601.eighty – 1. .00 – 5.001530The minimum width is 900 mm. widthFrom – up toXF4201.eighty – 2.
ThicknessMax. .00 – eight.102070The minimal width is 900 mm. widthFrom – up toXF5001.eighty – 1. .00 – 5.001480The minimum width is 900 mm. Other dimensions are available – please contact us.
1. There is no code for the first level: S500Q: P: ≤0.025, S: ≤0.015;
2. The L-level code L is expressed as S500QL: P: ≤0.020, S: ≤0.010;
3. The L1 code L1 is expressed as S500QL1: P: ≤0.020, S: ≤0.010
4. The other ingredients are the same, as shown below:
C:≤0.20, Si:s0.80, Mn:s1.70, N:≤0.015, B:≤0.0050, Cr:s1 .50, Cu:0.50, Mo:0.70,
Nb: 0.06, Ni: s2.0, Ti: s0.05, V: ≤0.12, Zr: ≤0.15
3. Application and prospect of S500Q S500QL/S500QL1
S500Q applies construction machinery, mining machinery, coal mine machinery such as hydraulic supports, crane extension arms, crane extension arms,
Excavator support arm, etc.
Mainly used in the manufacture of hydraulic supports with high welding performance, heavy vehicles, construction machinery, and port machinery.
4. S500Q series steel plate low-alloy high-strength structural steel:
5, S500Q series steel plate series performance specifications: this trademark fulfills the EN 10025/6-2004 European standard specifications.
6. Packaging, marking and quality certificate of S500Q series steel plate: The packaging, marking and quality certificate of steel plate shall comply with the rules of GB/T 247
widthFrom – up toS355MC1.50 – 1. .251600The minimal width is 900 mm. widthFrom – up toS315MC1.50 – 1. .002070The minimal width is ninety 0mm. widthFrom – up toS315MC1.forty nine – 1. widthYmpress LaserFrom – up toE250C(+N)1.50 – 1.
EN10025-6 S500Q 1.8924 1/8 carbon steel plate weight
Steel ETF surges to 52-week high. There is ‘room to the upside,’ but don’t chase, trader says – CNBC
Steel ETF surges to 52-week high. There is ‘room to the upside,’ but don’t chase, trader says.
Posted: Mon, 07 Dec 2020 12:05:00 GMT [source]
widthFrom – up toYmpress S550MC1.70 – 1.809201.80 – 1. widthFrom – up toYmpress S550MC1.80 – 1. widthFrom – up toYmpress S500MC1.70 – 1.809201.eighty – 1. widthFrom – up toYmpress S500MC1.eighty – 1. widthFrom – up toYmpress S460MC1.70 – 1. widthFrom – up toYmpress S420MC1.fifty three – 1.579501.57 – 1. widthFrom – up toYmpress S420MC1.fifty seven – 1.
- .00 – 9.001610The minimum width is 900 mm.
- .00 – 5.001480The minimal width is 900 mm.
- ThicknessMax.
- .00 – eight.102070The minimum width is 900 mm.
- widthFrom – up toXF5001.80 – 1.
widthFrom – up toS420MC1.57 – 1. widthYmpress LaserFrom – up toS420MC1.57 – 1. .00 – 6.351480The minimal width is a thousand mm.
Description by Manufacturer
Sell: EN10025-6 S500Q, S500QL, S500QL1 Steel plate
1. Steel Grade :EN10025-6 S500Q, S500QL, S500QL1 S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.
2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm
3. Adopt Standard: EN 10025-6.
4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate
6. Payment Item: 30% TT, or LC and TT
7. Trade Terms: FOB, CFR, CIF
8. Delivery Time: 30-40days