discount steel sales EN10025-6 S550Q 1.8924 steel plate

benjamin steels EN10025-6 S550Q 1.8924 steel plate

Our gangsteel S550Q Main Application:EN100256|S460Q|S460QL|S460QL1|S500Q|S500QL|S500QL1|S550Q|S550QL|S550QL1|S620Q|S620QL|S620QL1|S690Q|S690QL|S690QL1|S890Q|S890QL|S890QL1|S960Q|S960QL|S960QL1| is Widely Used In Construction of Bridges, Riveted, Bolted, And Other Structural Elements Included Drilling Machine, Power Shovel, Electricity Drive Wheel Counter- Mine Trolley, Mineral Product Automobile, Excavator, Car Loader.

from hydraulic shocks and vibration , an element of safety of 2,5 shall suffice. than 1.1 against the utmost forces in out of service circumstances.

The coefficients of friction are given within the following table. divergences within the effective safety due to using extremely divergent knowledge in technical literature. divided by the suitable coefficient 1,5 or 1,33 or 1,1 laid out in 3.2.1.1.
hold the test load in the occasion of switching off or failure of the hoist drive. Adequate means shall be provided to forestall the rope or chain from leaping off the pulleys. Ladders over 5 m in top shall be provided with safety hoops starting at a height of two,5 m. shall be permissible only when necessitated by virtue of area restrictions.

driver’s cab is fitted with applicable emergency exit means, e.g. a rope ladder. The driver’s cab should have the ability to move independently of the load. shall be protected against their entry and provided with a clear air provide. which the equipment will function, or in a language accepted by the user. If essential heating appliances ought to be supplied in the cabin. positioned on the crane, in order that a minimal illumination of 30 lux at ground level is assured. in a position to work, even when the principal electrical circuits of the crane are isolated.

buying steel EN10025-6 S550Q 1.8924 steel plate

Gangsteel factory S550Q Steel Standard :EN10025-6,ASTM-A578/A578M,ASTM-A435/A435M,EN10160
Our Rolling Size: Thickness*Width*Length 3-600mm*1220-4200mm*5000-18000mm
UT (Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing),CR��Control Rolled����NR��Normalizing Rolled���� N(Normalized), Q+T(Quenched and Tempered), Z Direction Test(Z15,Z25,Z35) , Charpy V-Notch Impact Test(-20��,-40��), HIC test, NDT , PWHT( Simulated Post Weld Heat Treatment),NACE0175,The Third Party Test (Such as SGS Test), Coated or Shot Blasting and Painting.
Relative grade of EN10025-6:

is crucial between the rope producer and the manufacturer of hoisting home equipment. Checking for fatigue power only must be performed for case of loading I. doesn’t exceed a permissible stress dependent on the breaking power of the material used.

steeldrives EN10025-6 S550Q 1.8924 steel plate

product of which the endurance restrict for a refined specimen is devided. The qualifies of steel discuss with solid, solid or rolled steels, and spheroidal graphite cast iron. on the pressure exerted between the rope and the groove supporting the rope.

• are the maximum and minimal values of the corresponding hundreds.
• Gangsteel is specialised in super thick low alloy, high strength steel plate and cooperated with ABS, BV, DNV, CCS, GL, LR, KR, NK, and RINA Classification Society to approve the super thickness plate to 300mm now.
• the permissible stress for steel A.52 in the case of loading considered.
• The hundreds – and due to this fact the stresses – shall be assumed to be the same as within the first example.
• COMPARISON OF ASME SPECIFICATIONS AND … ASME SA-370 specification is similar with ASTM A 370.

the entire load of the joint) to which 60 % of the load taken by row 1 is added. which are the same as those in clause (3.2.1.1.) are utilized to this limiting force, i.e. is the 0,2 % proof stress of the steel constituting the bolt. κ’ corresponds to safety in relation to the elastic restrict in accordance with desk T.three.2.2.2. T is the temperature on the place of erection of the crane. v is the horizontal linear velocity of the suspension level of the load. loadings are superimposed momentarily upon those as a result of load.

high yield steel EN10025-6 S550Q 1.8924 steel plate

1. EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S460Q, S460QL, S460QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S690Q, S690QL, S690QL1, S890Q, S890QL1 and S890QL steel plate grade.

S550Q steel plate is a hydroelectric steel plate, which is a low-alloy high-strength steel plate. It is a German standard steel plate. It has the characteristics of high yield and more strengthening alloy elements.
Mechnical property for EN 10025-6 S550Q High strength steel:

2. Delivery status: delivery in quenched and tempered quenched and tempered state.
It is also possible to add flaw detection standard requirements, flaw detection level requirements, Z-direction performance requirements, requirements for adding special alloy elements, etc., but it needs to be communicated between the supplier and the buyer and indicated in the contract.

3. Executive standard: WYJ (Wugang Technology Research and Development Association Standard)

4. The chemical composition of S550Q steel plate (melting analysis)
Chemical composition % of the Product analysis of grade EN 10025-6 S550Q (1.8904)

C: <=0.22
Si:<=0.86 Si:<=1.80 P:<=0.030 S:<=0.017
N: <=0.0060
Cu: <=0.55
Mo:<=0.74 Cr:<=1.60 V:<=0.14 Nb:<=0.07
Ti: <=0.07
B: <=0.0060
Ni: <=2.10
5. Mechanical properties of S550Q steel plate:
Yield strength Tensile strength Elongation%

6. What is EN 10025-6 QT S550Q STEEL?
EN 10025-6 QT S550Q STEE also named as S550Q high strength low alloy steel plate under steel stand EN 10025-6 which is for hot rolled structural steels with high yield strength and tensile strength in quenched and tempered delivery condition.Quenching operation which consists of cooling a ferrous steel plate more rapidly than in still air.

Tempering heat treatment applied to a ferrous steel plate generally after quench hardening or other heat treatment to bring the properties to the required level.S550Q shall be done low temperature impacting test under minus 20 centigrade.

These stresses are calculated at the upper and longer edges of the online. The bearing pressure shall not exceed the values indicated in clause three.2.2.1.four. is the permissible tensile stress of the metal used for the rivet. condition than the loading on the crane in or out of service. 3-axial tensile stresses, as is the case with an accumulation of welds.

Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.