Asm Material Data Sheet

We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.

Thermal Properties

Alloys shall be melted by the electric furnace process with or with out refining such as argon-oxygen-decarburization. Castings shall be warmth treated and shall conform to the required warmth treatment circumstances.

The materials shall conform to the necessities as to mechanical properties for the grade ordered such as tensile energy, yield energy, elongation, Brinell hardness. All H grades and grade F sixty three shall be examined for average grain size.

Chemical and product analyses shall be performed and shall conform to the required chemical composition in carbon, manganese, phosphorus, sulfur, silicon, chromium, molybdenum, and titanium. Tension check shall be done on the becoming material to determine the tensile properties corresponding to yield strength and tensile power. Fittings equipped underneath this specification shall be examined visually for floor discontinuities, floor checks, and mechanical marks. This specification covers castings, iron-chromium-nickel-molybdenum corrosion-resistant, duplex(austenitic/ferritic) for general application.

Length: 2000mm, 2438mm,2500mm,3000mm,6000mm,or required

• The material shall conform to the requirements as to mechanical properties for the grade ordered corresponding to tensile power, yield energy, elongation, Brinell hardness.
• This specification covers cast or rolled alloy and stainless-steel pipe flanges, cast fittings, and valves and parts for prime-temperature service.
• The supplies shall conform to the required chemical composition for carbon, manganese, phosphorus, silicon, nickel, chromium, molybdenum, columbium, titanium.

Stock Thickness: 0.1-200.0mm
Production thickness: 0.5.0-200mm
Width: 600-3900mm
Length: 1000-12000mm
Grade:
200 series: 201,202
300 series: 301,304,304L,304H,309,309S,310S,316L,316Ti,321,321H,330
400 series: 409,409l,410,420J1,420J2,430,436,439,440A/B/C
Duplex: 329,2205,2507,904L,2304
Surface: No.1,1D,2D,2B,NO.4/4K/hairline,satin,6k,BA,mirror/8K

This specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless-steel plate, sheet, and strip for pressure vessels and for general purposes. The metal shall conform to the requirements as to chemical composition specified. The material shall conform to the mechanical properties specified.

• They are a mix of austenitic stainless-steel (about 40% and 50%) and ferritic one (about 60% and 50%). For every property being compared, the top bar is AISI 316 stainless-steel and the bottom bar is EN 1.4408 stainless-steel. The chromium carbides form at the discontinuous ferrite/austenite phase boundaries somewhat than at the steady austenite/austenite grain boundaries. If the composition were adjusted to eliminate the ferrite, the yield power might be as little as 20,000 psi.

Specified ranges for the wrought European grades can be present in both the EN or EN tables. Most of the required ranges for the ‘BS’ grades can be found in the BS 1449 or BS 970 tables. The castings grades specified ranges may be discovered within the EN or BS 3100 tables. Casting products use completely different composition and so have their very own metal numbers in EN 10283.

Material of varieties aside from XM-16, XM-25, and Type 630 shall be furnished in the resolution-annealed situation, or in the equalized and oven-tempered situation. Types 630, XM-16, and XM-25 could also be furnished within the solution-annealed or age-hardened situation. Type UNS S46910 shall be furnished in resolution annealed, cold-worked or aged-hardened condition.

We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.

Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean