Stainless Steel 316

We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.

They are appropriate for compression, chilly and tensile hardening to supply springs and spring parts from strips or wires. The materials show non-magnetic properties in delicate condition, comparatively good mechanical properties in cryogenic temperatures and good weldability not requiring additional warmth treatment processes. It is also necessary to note the relatively low mechanical properties, which are not conducive to mechanical applications, and the tough machinability of steel. Stainless Steel 316L was designed to have a much decrease carbon content material than its 316 counterpart.

316L is considered to be extra immune to oxidation than sort 316, particularly in warm marine environments. Once again, its low levels of carbon defend it in opposition to carbon precipitation. The steel additionally exhibits resistance in extraordinarily low temperatures, even right down to cryogenic ranges. In regards to warmth, 316L shows higher resistance to creep, stress to rupture and general energy than different chrome steel grades. 316Ti also incorporates an addition of molybdenum in its composition.

1.4401 is very suitable for laser beam fusion slicing with nitrogen or flame slicing with oxygen. the reduce edges solely have small heat affected zones and are generally free of micro cracks and thus are well formable. While choosing an applicable process the fusion minimize edges can be converted directly. While processing solely stainless instruments like steel brushes, pneumatic picks and so forth are allowed, in order to not endanger the passivation.

Length: 2000mm, 2438mm,2500mm,3000mm,6000mm,or required

Stock Thickness: 0.1-200.0mm
Production thickness: 0.5.0-200mm
Width: 600-3900mm
Length: 1000-12000mm
Grade:
200 series: 201,202
300 series: 301,304,304L,304H,309,309S,310S,316L,316Ti,321,321H,330
400 series: 409,409l,410,420J1,420J2,430,436,439,440A/B/C
Duplex: 329,2205,2507,904L,2304
Surface: No.1,1D,2D,2B,NO.4/4K/hairline,satin,6k,BA,mirror/8K

• The use of a higher alloyed filler metallic could be necessary because of the cast construction of the weld steel.
• Austenitic steels only have 30% of the thermal conductivity of non-alloyed steels.
• To avoid overheating or burn-by way of of thinner sheets, higher welding speed has to be utilized.
• When choosing the filler metallic, the corrosion stress must be regarded, as well.

The main distinction between AISI 316 (1.4401) stainless steel and AISI 316L (1.4404) stainless steel is the carbon content. Due to lower carbon amount AISI 316L (1.4404) stainless-steel has decreased threat of sensitization (grain boundary carbide precipitation) but on the similar time, it loses some of its power. AISI 316LN (1.4406) chrome steel is alloyed with nitrogen to compensate for the loss of power. 316 and 316L products are characterized by resistance to high temperatures, excessive plasticity, ductility, and relatively good ductility.

For cleansing the floor the processes brushing, grinding, pickling or blasting (iron-free silica or glass spheres) can be utilized. Pickling of the beforehand brushed seam area is carried out by dipping and spraying, nonetheless, typically pickling pastes or options are used.

Stainless Steel 316 1.4401

316Ti retains physical and mechanical properties just like standard grades of 316. AISI 316 (1.4401), AISI 316L (1.4404) and AISI 316LN (1.4406) are Cr-Ni-Mo austenitic stainless steels, that are commonly used because of their superb corrosion resistance in numerous aggressive environments. Stainless Steel 316Ti is referred to as the stabilized grade of the 316 varieties, and likewise one of many two 316 stainless steels that is recommended for larger temperature conditions. This grade incorporates a small amount—sometimes only zero.5%—of titanium. While it nonetheless possesses most of the traits of different 316 grades, the addition of titanium permits 316Ti to be protected from precipitation at elevated temperatures, even with extended publicity.

Like in other 316 grades, the molybdenum serves as elevated safety in opposition to corrosion, pitting from chloride options and elevated energy when placed in excessive temperature environments. However, its high temperature resistance can be compounded by its titanium content material, which permits 316Ti to be resistant to precipitation at these temperatures.

We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.

Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean