Din En 1 4301 Stainless Steel X5crni18

We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.

It is used in the crude oil industry, chemical trade, petrochemical business, automobile industry. The floor state has a relatively massive influence on the corrosion resistance of the metal, so that the polished surface generally has superior corrosion resistance than the tough surface. DIN EN 1.4301 chrome steel has good atmospheric corrosion resistance up to 300 °C, and good resistance to many (frivolously corrosive) organic and inorganic chemical compounds. It may also be used at very low temperatures, but there are some limitations in marine, coastal and chloride-containing options.

Fusion welding efficiency for type 304 stainless-steel is superb both with and without fillers. Recommended filler rods and electrodes for stainless-steel 304 is grade 308 chrome steel. Grade 321 could also be used if submit-weld heat remedy just isn’t attainable. Reliable lengthy lasting and at par with worldwide quality and safety norms.

For greatest outcomes it is strongly recommended that the floor of parts is polished and free from scale, foreign particles. All aforementioned specifications function a common orientation and need to be reviewed relying on the circumstances of use. Areas of use include chemical business, mineral oil trade, petrochemistry and car industry. The following desk reveals the chemical composition of 1.4301 material base on cast analysis. This Data is indicative solely and as such is not to be relied upon instead of the full specification.

Application:kitchware,door,decoration,elevator,water tank,etc

Stock Thickness: 0.1-200.0mm
Production thickness: 0.5.0-200mm
Width: 600-3900mm
Length: 1000-12000mm
Grade:
200 series: 201,202
300 series: 301,304,304L,304H,309,309S,310S,316L,316Ti,321,321H,330
400 series: 409,409l,410,420J1,420J2,430,436,439,440A/B/C
Duplex: 329,2205,2507,904L,2304
Surface: No.1,1D,2D,2B,NO.4/4K/hairline,satin,6k,BA,mirror/8K

• DIN EN 1.4301 chrome steel (X5CrNi18-10) is a standard austenitic stainless-steel with good resistance to atmospheric, organic and inorganic chemical substances.
• The stainless austenitic chromium-nickel metal 1.4301 exhibits good corrosion resistance (particularly in pure environmental media and within the absence of appreciable chlorine and salt concentrations and sea water) and weldability.
• This material is extensively used as a result of its excellent intergranular corrosion resistance, good cold deformability, good deep drawability and weldability.

Fabrication strategies involving cold working may require an intermediate annealing stage to alleviate work hardening and avoid tearing or cracking. At the completion of fabrication a full annealing operation must be employed to scale back inner stresses and optimise corrosion resistance. Fabrication of all stainless steels ought to be accomplished solely with tools devoted to stainless-steel materials.

Corrosion Resistance

1.4301 / AISI 304 is the usual austenitic chromium-nickel stainless-steel. Deutsche Edelstahlwerke is a number one producer of special steel long products. Acidur 4301 is their model of normal 304 chrome steel. AISI 304 is highly corrosion proof against most oxidizing acids.

Particular ranges of sulphur content material may provide improvement of particular properties. For machinability a managed sulphur content material of 0.015 % to zero.030% is recommended and permitted.

Company

The stainless austenitic chromium-nickel steel 1.4301 shows good corrosion resistance (significantly in pure environmental media and in the absence of considerable chlorine and salt concentrations and sea water) and weldability. However, after welding 1.4301 just isn’t steady to intergranular corrosion.

We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.

Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean