1 inch ss pipe

We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.

Both steels are durable and supply wonderful resistance to corrosion and rust. 304 chrome steel is probably the most versatile and broadly used austenitic stainless steel in the world, due to its corrosion resistance. 304 stainless is also cheaper in cost compared to 316, one more reason for its recognition and widespread use.

Duplex grades are typically most popular due to their corrosion resistance and higher strength, allowing a discount of weight and a protracted life in maritime environments. Ferritic stainless steels possess a ferrite microstructure like carbon metal, which is a physique-centered cubic crystal construction, and contain between 10.5% and 27% chromium with little or no or no nickel.

Unlike carbon metal, stainless steels don’t endure uniform corrosion when exposed to moist environments. Unprotected carbon steel rusts readily when uncovered to a combination of air and moisture. The resulting iron oxide floor layer is porous and fragile. In addition, as iron oxide occupies a bigger volume than the original steel, this layer expands and tends to flake and fall away, exposing the underlying steel to additional assault.

Our stainless production range

• 304 chrome steel is the 18/8 stainless present in kitchen cutlery and cooking tools, though it has many different industrial applications.
• Type 316 is usually used in chemical processing, food and beverage processing, and in pulp and paper machinery.
• The different grades and finishes of chrome steel make the composition suitable for a wide variety of environments, and every grade of stainless-steel can be utilized in a broad vary of features.
• The mostly used grade of chrome steel is sort 304, which is also called A2 or 18/eight.

The elevated nickel content and the inclusion of molybdenum makes grade 316 stainless-steel a bit costlier than grade 304 per ounce of fabric. But the place grade 316 stainless proves superior is its increased corrosion resistance—significantly towards chlorides and chlorinated options. This makes grade 316 stainless particularly fascinating for applications where publicity to salt or other highly effective corrosives is an issue. Grade 316 is a popular alloy of stainless steel with a melting vary of 2,500 °F – 2,550 °F (1,371 °C – 1,399 °C).

SS kind 304 is available in round, square, hex, and flat bar selection in addition to the sheet, plate, tube, pipe, and angle shapes. The two metal grades are comparable in look, chemical make-up and characteristics.

Grades

Resistance to other gases depends on the kind of fuel, the temperature, and the alloying content material of the stainless-steel. 304/304L stainless (UNS S30400) is the commonest and broadly used chrome steel. It is an austenitic chrome steel with non-magnetic properties within the annealed situation that offers good corrosion resistance to both chemical and atmospheric exposures, with a excessive resistance to oxidation. Type 304/304L has good forming and glorious welding traits.

Galvanized Steel

Austenitic stainless steels are the simplest to weld by electrical arc, with weld properties similar to these of the base steel (not cold-worked). Post-weld warmth remedy is nearly all the time required whereas preheating earlier than welding can be needed in some circumstances.

We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.

Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean