1.8909 en 10025-6 S500QL jones steel
Gangsteel supply high-strength structural steel plates en10025-6 S500QL,1.8909 steel plates in quenched and tempered heat treatment. S500QL usually called high-strength plates and en10025-6 S500QL are widely used in construction machinery and mining machinery. S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered.
It must be specified prior to ordering if higher stress relieving temperatures or longer holding times need to be utilized. The verification of applicable stress relieving temperatures for a delivered plate may be attainable on request. However, water quenching of a fashioned work piece or element will typically be less efficient than the unique quenching in the plate mill in order that the fabricator may not be able to re-establish the properties required and due to this fact hot forming is probably not suitable. In this respect, we recommend you to contact the metal producer previous to ordering in all cases the place hot forming is required. If the temperature of 560 °C (1040 °F) is exceeded, the initial tempering might be altered in order that the mechanical properties are affected. To regain the preliminary properties new quenching and tempering become needed. S500QL could be cold shaped with regard to its high yield strength.
en10025-6 S500QL 1.8909 steel suppliers near me
en10025-6 S500QL 1.8909 tube steel
en10025-6 S500QL 1.8909 metal steel
en10025-6 S500QL 1.8909 steel supplier
en10025-6 S500QL 1.8909 steel company
en10025-6 S500QL 1.8909 mild steel
en10025-6 S500QL 1.8909 steel sales
en10025-6 S500QL 1.8909 united states steel
en10025-6 S500QL 1.8909 tubular steel
en10025-6 S500QL 1.8909 free steel
en10025-6 S500QL 1.8909 steel supplies
en10025-6 S500QL 1.8909 steel manufacturers
en10025-6 S500QL 1.8909 honing steel
en10025-6 S500QL 1.8909 metalsdepot
en10025-6 S500QL 1.8909 steels
en10025-6 S500QL 1.8909 ussteel
en10025-6 S500QL 1.8909 steel shop
en10025-6 S500QL 1.8909 steel tube sizes
en10025-6 S500QL 1.8909 steel products
en10025-6 S500QL 1.8909 steel material
en10025-6 S500QL 1.8909 steelrs
en10025-6 S500QL 1.8909 steel tubes
en10025-6 S500QL 1.8909 steelers wheel
Depending on the related design code this can result in the need of bigger bending radiuses than indicated within the chart. For larger chilly forming amounts we advocate you to seek the advice of the metal producer previous to ordering. Cold forming is said to a hardening of the steel and to a decrease in toughness. This change in the mechanical properties can in general be partially recovered through a subsequent stress reduction warmth therapy. The whole processing and application strategies are of fundamental importance to the reliability of merchandise produced from this metal. The consumer ought to be sure that his design, building and processing strategies are aligned with the material, correspond to the state-of-the-artwork that the fabricator has to adjust to and are suitable fort he intended use.
What is EN 10025-6 S500QL Equal Grade.
Equivalent steel grade of S500QL CHINA Grade Q500E | |||
Europe |
Germany |
France |
Sweden |
FeE 500 V KT |
TStE 500 V |
E 500T |
2615 |
S500Q and S500QL steel plates are German standard high-strength structural steels, usually called high-strength plates, equivalent to the national standard Q500D,
It is widely used in construction machinery and mining machinery.
S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered. S500Q series are: S500Q, S500QL, S500QL1.Second, S500Q chemical composition: The quality of S500Q is divided into three levels
What is EN 10025-6 S500Q mechanical properties?
EN10025-6 S500Q quenched and tempered steel plate mechanical properties
Grade |
Thickness |
Min Yield (Mpa) |
Tensile (MPa) |
Elongation (%) |
Min Impact Energy |
|
EN10025-6 S500QL
|
8mm-50mm |
Min 500Mpa |
590-770Mpa |
17% |
-40 |
Min 30J |
51mm-100mm |
Min 480Mpa |
590-770Mpa |
17% |
-40 |
Min 30J |
|
101mm-150mm |
Min 440Mpa |
540-720Mpa |
17% |
-40 |
Min 30J |
What is application of EN10025-6 S500QL?
Used in buildings, bridges, ships, vehicles, pressure vessels and other structures, the carbon content (melting analysis) is generally not more than 0.20%, the total content of alloying elements is generally not more than 2.5%, the yield strength is not less than 295MPa, and it has good impact toughness
And low alloy steel with welding function.
What is EN 10025-6 S500QL chemical?
EN10025-6 S500QL quenched and tempered steel plate Chemical composition
Grade |
C % |
Si % |
Mn % |
P % |
S % |
N % |
B % |
Cr % |
EN 10025-6 S500QL
|
0.200 |
0.800 |
1.700 |
0.020 |
0.010 |
0.015 |
0.005 |
1.500 |
Cu % |
Mo % |
Nb % |
Ni % |
Ti % |
V % |
Zr % |
|
|
0.500 |
0.700 |
0.060 |
2.000 |
0.050 |
0.120 |
0.150 |
|
Depending on the product thickness and manufacturing conditions, the manufacturer can add one or several alloying elements to the steel to increase the maximum value in order to obtain the specified properties (see 7.2.2).
At least 0.015% of grain refinement elements should be present. Aluminum is one of these elements.
The minimum content of soluble aluminum is 0.015%. If the aluminum content reaches the minimum of 0.018%, the value is considered to be reached.
1.8909 en 10025-6 S500QL steel shear strength
Smaller flatness deviations could also be potential on request previous to order. Finally, it’s the fabricator’s duty to acquire the required values of the metal via an applicable warmth therapy. The impression test shall be carried out on Charpy-V-specimens in accordance with EN ISO using a 2-mmstriker. One particular person value could also be under the minimum common worth specified, supplied that it is not less than 70 % of that worth. For plate thicknesses under 12 mm (0.5 in.) the take a look at may be carried out on Charpy-V test specimens with decreased width; the minimum width have to be 5 mm (0.2 in). b If not obvious, the yield power Rp0.2 is measured as an alternative.
3. The chemical composition and mechanical properties of S500QL,1.8909 steel plates steel plates:
Carbon C: ≤0.20 Silicon Si: ≤0.80
Manganese Mn: ≤1.70 Nitrogen N: ≤0.015
Boron B: ≤0.0050 Chromium Cr: ≤1.50
Copper Cu: 0.50 Molybdenum Mo: 0.70
Niobium Nb: 0.06 Nickel Ni: ≤2.0
Titanium Ti: ≤0.05 Vanadium V: ≤0.12
Zirconium Zr: ≤0.15 S: ≤0.025
Phosphorus P: ≤0.015
PS: The specific chemical composition should be indicated in the steel plant material book.
2. en10025-6 S500QL,1.8909 are: S500Q, S500QL, S500QL1��Two, S500Q, S500QL, S500QL1 chemical composition: The quality of S500Q is divided into three level
1.7-billion-dollar steel dynamics plant in Sinton set to be up and running by Fall 2021 – KIIITV.com
1.7-billion-dollar steel dynamics plant in Sinton set to be up and running by Fall 2021.
Posted: Thu, 10 Dec 2020 00:09:24 GMT [source]
en10025-6 S500QL 1.8909 price of steel
To avoid hydrogen-induced chilly cracking, only filler materials, which add little or no hydrogen to the base steel, may be used. For larger cold forming amounts or if prescribed by rules, a brand new quenching and tempering heat remedy may be necessary to revive the unique mechanical properties.
S690QL
1.8909 en 10025-6 S500QL steel wholesaler
S500QL STEEL PLATE_SteelBBNSTEEL is specialized in supplying EN metal plate in S500 QL and S500QL,EN S500QL,S500QL steel materialEN S500QL High Strength Steel plateS500QL – according to EN with minimal impression values down to -40 S500QL metal plate equal#176;C (-forty S500QL steel plate equivalent#176;F) S500QL1- according to EN with minimal impression values right down to -60 S500QL metal plate equal#176;C (-seventy six S500QL steel plate equivalent#176;F) Unitedsteel Mill Supply High strength steel plate,and have varied inventory dimension,If you require high power steel plate.Please contact us by Email to contact us.
S500QL1 STEEL PLATE_Steel Gangsteel is specialised in supplying EN metal plate in S500 QL1,S500QL1,EN S500QL,S500QL Steel plate.
S500QL STEEL PLATE_SteelBBNSTEEL is specialised in supplying EN metal plate in S500 QL and S500QL,EN S500QL,S500QL steel materialEN S500QL High Strength Steel plateS500QL – in accordance with EN with minimal impression values all the way down to -40 EN S500QL steel in US#176;C (-40 EN S500QL metal in US#176;F) S500QL1- based on EN with minimum influence values all the way down to -60 EN S500QL metal in US#176;C (-seventy six EN S500QL metal in US#176;F) Unitedsteel Mill Supply High power metal plate,and have varied stock dimension,If you require high power metal plate.Please contact us by Email to contact us.
16Mo3 Steel is a EN10028 specified strain vessel grade chrome molybdenum metal alloy is used as a weldable steel in the fabrication of business boilers and steel pressurised vessels discovered within the oil. abs grade ah36 shipbuilding and offshore industries metal Has been dedicated to the of export metal trade more than 10 years. Our service includes every kind of metal product , together with uncooked materials and processed completed merchandise. Unless in any other case agreed, the general technical supply necessities in accordance with EN apply. The properties of structural elements can be altered by a stress reduction warmth therapy. A stress reduction heat remedy could be performed at a maximum temperature of 560 °C (1040 °F) and most holding time of 60 minutes with out vital impairment of the properties.