0.7 mm stainless steel sheet

We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.

With avoiding oxidation throughout the seam surface laser beam welding by applicable backhand welding, e.g. Helium as inert gasoline, the welding seam is as corrosion resistant as the bottom metal. A sizzling crack hazard for the welding seam doesn’t exist, when choosing an applicable process. 1.4841 is also suitable for laser beam fusion chopping with nitrogen or flame chopping with oxygen.

Application

Additionally, the EN chemical designation is X15CrNiSi25-21. Both AISI 316 chrome steel and EN 1.4841 chrome steel are iron alloys. They have 82% of their common alloy composition in frequent.

Heat therapy after welding is often not ordinary. Austenitic steel have solely 30% of the thermal conductivity of non-alloyed steels. Their fusion level is lower than that of non-alloyed steels, due to this fact austenitic steels should be welded with lower heat input than non-alloyed steels. To avoid overheating or burn-via of thinner sheets, higher welding pace has to be utilized.

Technique

• Their fusion level is decrease than that of non-alloyed steels, therefore austenitic steels need to be welded with lower heat input than non-alloyed steels.
• Copper back-up plates for faster heat injection are functional, whereas, to keep away from cracks within the solder steel, it is not allowed to surface-fuse the copper again up plate.
• Heat therapy after welding is generally not usual.
• Austenitic metal have only 30% of the thermal conductivity of non-alloyed steels.

Stock Thickness: 0.1-200.0mm
Production thickness: 0.5.0-200mm
Width: 600-3900mm
Length: 1000-12000mm
Grade:
200 series: 201,202
300 series: 301,304,304L,304H,309,309S,310S,316L,316Ti,321,321H,330
400 series: 409,409l,410,420J1,420J2,430,436,439,440A/B/C
Duplex: 329,2205,2507,904L,2304
Surface: No.1,1D,2D,2B,NO.4/4K/hairline,satin,6k,BA,mirror/8K

Steelinox is the proper companion if your materials necessities are high. The chip and plastic processing of the above-mentioned grades is somewhat tough because of the high ductility. The properties of sturdiness at excessive temperatures give method to H18N10MT steels, which unfortunately do not show comparable resistance to oxidation.

While processing only stainless instruments like metal brushes, pneumatic picks and so on are allowed, so as to not endanger the passivation. It should be uncared for to mark throughout the welding seam zone with oleaginous bolts or temperature indicating crayons. For cleansing the surface the processes brushing, grinding, pickling or blasting (iron-free silica sand or glass spheres) ca be applied. For brushing only stainless steel brushes could be sued. Pickling of the beforehand brushed seam space is carried out by dipping and spraying, nevertheless, usually pickling pastes or options are used.

For product thicknesses over 12mm the double-V butt weld has to be most well-liked instead of a single-V butt weld. The included angle ought to be °, when utilizing MIG-welding about 50° are sufficient. An accumulation of weld seams ought to be averted.

The related and at the similar time with related chemical composition species with lower resistance to oxidation is the grade H20N12S2, 1.4828, AISI 309, X15CrNiSi heat resistant metal up to approx. H25N20S2 steel is the right choice for components working in a gasoline environment containing Nitrogen and Oxygen. Unfortunately, the grade does not present the identical properties involved with Sulfur compounds.

We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.

Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean